Citroën C5 X (2022 year). Manual in english — page 12

178

In the event of a breakdown

► Disconnect the

(+)

terminal by disconnecting

the red quick-release clamp:

• Raise lever

A

fully to release clamp

B

.

• Remove clamp

B

by lifting it off.

Reconnection

Front battery:

► Connect the

(+)

terminal by connecting the

red quick-release clamp:

• Raise lever

A

fully.

• Refit open clamp

B

on the

(+)

terminal.

• Push clamp

B

fully down.

• Lower lever

A

to lock clamp

B

.

Central battery:

► Connect the

(-)

terminal using the black

quick-release connector.

Following reconnection

After reconnecting the battery, turn on the

ignition and wait 1 minute before starting the

engine, to enable the electronic systems to

initialise.

If minor problems nevertheless persist following

this operation, contact a CITROËN dealer or a

qualified workshop.

Referring to the relevant section, reinitialise

certain equipment:

– Electronic key.

– Sunroof.

– Electric windows.

– Date and time.

– Preset radio stations.

After reconnecting the battery, the

message "

Collision risk detection

system fault

" is displayed on the instrument

panel when the ignition is switched on. This

operation is perfectly normal. The message

will disappear while driving.

Towing the vehicle

General recommendations

Observe the legislation in force in the

country where you are driving.

Ensure that the weight of the towing vehicle is

higher than that of the towed vehicle.

The driver must remain at the wheel of the

towed vehicle and must have a valid driving

licence.

When towing a vehicle with all four wheels on

the ground, always use an approved towing

arm; rope and straps are prohibited.

The towing vehicle must move off gently.

When the vehicle is towed with its engine

off, there is no longer braking and steering

assistance.

A professional towing service must be

called if:

– Broken down on a motorway or main road.

– Not possible to put the gearbox into neutral,

unlock the steering, or release the parking

brake.

– Not possible to tow a vehicle with an

automatic gearbox, with the engine running.

– Towing with only two wheels on the ground.

– Four-wheel drive vehicle.

– No approved towbar available.

Rechargeable hybrid vehicles

Before any intervention, with the ignition

on, depress the brake pedal and select mode

N

, then switch off the hybrid system (

READY

indicator lamp off).

Always call on professionals for recovery of

the vehicle on a flatbed lorry or trailer.

Use the towing eye

only

to free the vehicle

if it is stuck, or to secure it for recovery on a

flatbed lorry or trailer.

179

In the event of a breakdown

8

Towing constraints

Type of vehicle

(engine/gearbox)

Front wheels on the

ground

Rear wheels on the

ground

Flatbed

4 wheels on the ground

with towbar

Internal combustion/Automatic

Hybrid 2WD

2WD:

2-wheel drive.

In case of battery or electric parking brake failure, it is essential to call a professional using flatbed recovery vehicles.

Accessing the tools

For more information on accessing the

Tool kit

,

refer to the corresponding section.

Towing your vehicle

To access the front screw thread:

► Unclip the cover by pressing on its lower left-

hand section.

► Release the cover downwards.

To be towed:

► Screw the towing eye in fully.

► Install the towbar.

► Put the gearbox into neutral.

Failure to observe this instruction could

result in damage to certain components

(braking, transmission, etc.) and to the

absence of braking assistance the next time

the engine is started.

Automatic gearbox

Never tow the vehicle with the driving

wheels on the ground and the engine off.

► Unlock the steering and release the parking

brake.

► Switch on the hazard warning lamps on both

vehicles.

► Move off gently, drive slowly and only for a

short distance.

180

In the event of a breakdown

Towing another vehicle

To access the rear screw thread:

► Unclip the cover by pressing on its upper

section.

► Pull the cover downwards.

To tow:

► Screw the towing eye in fully.

► Install the towbar.

► Switch on the hazard warning lamps on both

vehicles.

► Move off gently, drive slowly and only for a

short distance.

181

Technical data

9

Engine technical data and

towed loads

Engines

The engine characteristics are given in the

vehicle's registration document, as well as in

sales brochures.

Only the values available at the time of

publication are presented in the tables.

Contact a CITROËN dealer or a qualified

workshop to obtain missing values.

The maximum power corresponds to the

value type-approved on a test bed, under

conditions defined by European legislation

(Directive 1999/99/EC).

For more information, contact a CITROËN dealer

or a qualified workshop.

Weights and towed loads

The weights and towed loads relating to

the vehicle are indicated on the registration

document, as well as in sales brochures.

These values are also indicated on the

manufacturer's plate or label.

For more information, contact a CITROËN dealer

or a qualified workshop.

The GTW (Gross Train Weight) and towed load

values indicated are valid up to a maximum

altitude of 1,000 metres. The towed load value

must be reduced by 10% for each additional

1,000 metres of altitude.

The maximum authorised nose weight

corresponds to the weight permitted on the

towball.

When exterior temperatures are high, the

vehicle performance may be limited in

order to protect the engine. When the exterior

temperature is higher than 37°C, reduce the

towed weight.

Towing even with a lightly loaded vehicle

can adversely affect its road holding.

Braking distances are increased when towing

a trailer.

When using a vehicle to tow, never exceed

a speed of 62 mph (100 km/h) (observe the

local legislation in force).

182

Technical data

Engines and towed loads - Petrol

Engines

PureTech 130 S&S

PureTech 130 S&S

PureTech 180 S&S

Gearboxes

EAT8

(Auto. 8-speed)

EAT8

(Auto. 8-speed)

EAT8

(Auto. 8-speed)

Codes

EB2ADTS ATN8 STTd

EB2ADTSi ATN8 STTd

EP6FADTXD ATN8 STTd

Model codes:

NCHNS/P

NCHNS/P

ND5GF/P

Cubic capacity (cc)

1,199

1,199

1,598

Max. power: EC standard (kW)

96

96

133

Fuel

Unleaded

Unleaded

Unleaded

Braked trailer (within the GTW limit) (kg)

on a 10% or 12% gradient

1 050

1 050

1 600

Unbraked trailer (kg)

745

745

750

Maximum authorised nose weight (kg)

70

70

70

183

Technical data

9

Engines and towed loads - Rechargeable hybrid

Hybrid 225 e-EAT8

Code

EP6FADTXHPD

Model codes:

NDDGY/P

Braked trailer (within the GTW limit) (kg)

on a 10% or 12% gradient

1 350

Unbraked trailer (kg)

750

Maximum authorised nose weight (kg)

70

Petrol engine

PureTech 180

Gearbox

Electric automatic 8-speed

Cubic capacity (cc)

1,598

Max. power: EC standard (kW)

132

Fuel

Unleaded

Electric motor

Technology

Synchronous with permanent magnets

Max. power: EC standard (kW)

81

Traction battery

Technology

Lithium-Ion

Voltage (Volts AC)

240-400

Installed capacity (kWh)

12.4

Combined power (kW)

165

184

Technical data

Dimensions (mm)

These dimensions have been measured on an

unladen vehicle.

* With folded mirrors.

** With unfolded mirrors.

Identification

markings

Various visible markings for vehicle identification

and vehicle search.

A. Vehicle Identification Number (VIN), under

the front passenger seat, on the crossbeam.

Stamped on the crossbeam.

B. Vehicle Identification Number (VIN), on the

dashboard.

Printed on an adhesive label visible through the

windscreen.

C. Manufacturer's label.

Affixed to the right-hand door.

Bears the following information:

– Manufacturer’s name.

– European whole vehicle type approval

number.

– Vehicle Identification number (VIN).

– Gross vehicle weight (GVW).

– Gross train weight (GTW).

– Maximum weight on the front axle.

– Maximum weight on the rear axle.

D. Tyres/paint code label.

Affixed to the driver's door.

Bears the following information about the tyres:

– Tyre pressures, unladen and laden.

– Tyre specification, made up of the dimensions

and type as well as the load and speed indices.

– Spare tyre inflation pressure.

Also indicates the paint colour code.

The vehicle may be originally equipped

with tyres with higher load and speed

indices than those indicated on the label,

without affecting tyre pressure (on cold tyres).

In the event of a change in the type of tyres,

contact a CITROËN dealer for the tyre fits

approved for the vehicle.

185

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

10

MYCITROËN DRIVE

PLUS - MYCITROËN

PLAY PLUS

GPS navigation -

Applications - Multimedia

audio system - Bluetooth

®

telephone

The functions and settings described

vary according to the version and

configuration of the vehicle, and according to

the country of sale.

For safety reasons and because they

require sustained attention by the driver,

the following operations must be carried out

with the

vehicle stationary

and the ignition

on:

– Pairing the smartphone with the system via

Bluetooth

®

.

– Using the smartphone.

– Connecting to Mirror Screen

(Apple

®

CarPlay

®

or Android Auto).

– Changing the system settings and

configuration.

The message

Energy economy mode

is

displayed when the system is about to go

into standby.

For more information on

Energy economy

mode

, refer to the “Practical information”

section.

The AM radio selection mode is not

available on electric and rechargeable

hybrid vehicles.

Warning

Navigation is a driving aid. It cannot

replace the driver. All guidance instructions

should be carefully checked by the user.

By using the navigation, you accept the

following terms and conditions:

https://www.tomtom.com/en_gb/legal/

eula-automotive/?388448

First steps

The system starts when the ignition is

switched on.

With the ignition off, a press turns the system on.

With the engine running, a press mutes the

sound.

A long press launches standby mode: the sound

cuts off, the screens go off and the clock is

displayed on the central screen.

Rotation: volume control.

Information

This system gives access to the following

elements:

– Audio equipment and telephone controls with

display of associated information.

– Connected services and display of associated

information.

– Navigation system controls and display

of associated information (depending on

equipment).

– Voice recognition (depending on equipment).

– Time and exterior temperature.

– Heating/air conditioning system controls and

reminders of settings.

– Settings for driving aid functions, comfort

and safety functions, extended head-up display

(depending on equipment and version), audio

equipment and digital instrument panel.

– Settings for functions specific to rechargeable

hybrid vehicles.

– Display of visual manoeuvring aid functions.

– Interactive handbook.

– Video tutorials (e.g. screen management,

driving aids, voice recognition).

Upper bar

Certain information is displayed permanently in

the upper bar of the touch screen:

– Exterior temperature from vehicle sensors

(associated with a blue symbol in case of risk

of ice).

– Temperature setting reminder for driver and

passenger side air conditionning.

186

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

– Charge level of the connected smartphone.

– System connection status (Bluetooth

®

, Wi-Fi,

cellular network).

– Time.

– Quick access to the Mirror Screen

®

functions

(associated with a connected smartphone).

Swipe down from the upper edge of the touch

screen, to access the notifications centre and

display a list of quick settings:Guest, Privacy

Settings, Brightness, My Devices, night mode,

etc.

Principles

► Use the HOME button to display the

last used home page, a second press

displays the first home page, then press the

virtual buttons on the touch screen.

Scroll through the home pages, by sliding

your finger on the screen to the right or to

the left.

Principle of movement in the system

Depending on the pages displayed on the

screen, scroll through the text or the menu (on

the left side of the screen) by sliding your finger,

as with a smartphone.

Touch buttons

Display/hide the context menu.

Return to the previous page.

► To change the status of a function, press the

description for the corresponding line (change

confirmed by the slider moving to the right/left:

function activated/deactivated).

Access additional information on the

function.

Access to a function’s settings.

Add/delete shortcuts.

Configuring profiles

Press the "

Settings

" application.

In the list, select the "

Profile

” tab.

The screen display presents a “Guest” profile

built into the system and allows for the creation

and personalisation of several new profiles

associated or not with mobile devices.

The “

Guest

” profile has a default display

with the possibility of adding to it and/or

returning it to its initial configuration. This profile

is built into the system and cannot be deleted.

Each profile created can be associated

with a mobile device of your choice

connected via Bluetooth

®

; the Bluetooth

®

function

of the mobile device must first be activated. This

association allows the system to detect your

presence in the vehicle when it starts and to

propose the activation of your personalised

profile.

The connected mobile device serves as an

access key to the profile and restores the last

value of the associated Private Mode.

If a profile is not connected to the mobile device,

the last profile used will be highlighted.

Select “

Create Profile

” to follow the

procedure.

Creating a new profile allows you to personalise:

– the language, the units, the Privacy Settings.

– the screen configuration, the appearance,

the My shortcuts (depending on equipment).

– the audio settings, the favourite radio stations.

– the lighting, the interior ambiance (refer to the

"Ease of use and comfort" section).

– some driving aids, the list of favourites.

To delete a profile, select it from the list of

profiles then press the bin.

Privacy Settings

"Privacy Settings" management is associated

with each profile. This function is used with:

a "Guest" profile configured by default in "Private

Mode",

or

a profile to be created in the system, with or

without connection with a mobile device.

If there is no connection with a mobile device,

the mode value will be set to "Private Mode".

The connected mobile device serves as an

access key to personal information. First

activate the Bluetooth

®

function of the portable

device. The last value of the saved mode will be

restored.

"

Share Data and Location

"

This mode allows the vehicle to transmit

outside the vehicle all the personal data

187

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

10

necessary for each valid connected service

available.

Personal data required for connected

service use are sent to services

providers.

"

Share Data

"

This mode allows the vehicle to transmit

outside the vehicle all the data necessary for

each valid connected service available, with the

exception of vehicule position data (e.g. GPS

coordinates).

Some connected services may not be

able to function without vehicule position

data.

"

Private Mode

"

This mode does not allow the vehicle to

transmit personal data outside the vehicle.

Connected services will only perform

local processing inside the vehicle with

limited functions.

This mode won't be applied on regulation

functions (emergency or assistance call)

or specific services with given user's consent

on business contracts (Connected alarm).

When the vehicule is in professional use or

in use under specific contracts subscribed

(connect fleet, public delegation…), some

privacy modes won't be available to the user

depending on services data sharing needs.

To change the mode, swipe down from the upper

edge of the touch screen, to display all the quick

settings.

Press this button and select the chosen

mode. The mode is highlighted.

OR

Press the "

Settings

" application.

In the list, select the "

Connectivity

" tab.

Select "

Privacy Settings

".

Choose the mode.

Internet portal

During the first use, upon acquisition of the

vehicle, the user is invited to select the country

of residence for the use of the Internet portal.

If the country is not selected, the notification is

stored in the notification centre and disappears

once the country is selected. Slide a finger on

the touch screen from top to bottom to display all

the notifications.

The selection of a country is necessary to use

the available internet applications.

Press the "

Settings

" application.

In the list, select the "

Connected Services

” tab.

Choose the country.

The first time you use it, via a connected

mobile device, the system links to your

profile. The connected mobile device serves as

an access key to saved personal information.

First activate the mobile device’s Bluetooth

®

function.

Select the desired application, authentication will

be requested if necessary. This authentication

will be saved for future uses via the mobile

device connected to the current profile.

An authentication will be requested at each use if

the mobile device is not connected to the current

profile or if the Guest profile is used.

With the use of the “Guest” profile, an

identification will be requested for each

use.

Updating the system

Remote device management and

remote software and firmware updates

As an integral part of the service related

to the performance of connected service

contract(s), necessary device management

and necessary software and firmware

updates related to the soft- and firmware

for the named connected service will be

performed remotely, in particular by using

"Over the Air"-technology.

For this, a secure radio network connection

between the vehicle and the device

management server of the Manufacturer will

be established after each "ignition on" when

a cellular network is available. Depending

on the equipment of the vehicle, connection

configuration must be set to "Connected

188

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

vehicle" to allow the establishment of the

radio network connection.

Irrespective of a valid connected service

subscription, remote product security or

product safety related device management

and software and firmware updates will

be performed when the processing is

necessary for the compliance with a legal

obligation to which the Manufacturer is

subject (e.g. applicable product liability law,

e-call regulation) or when the processing

is necessary in order to protect the vital

interests of the respective vehicle users and

passengers.

The establishment of a secure radio network

connection and the related remote updates

are not affected by privacy settings and will

be performed in principal after an initiation

by the vehicle user following a respective

notification.

The system is able to notify receipt of an update

as soon as it is connected to an exterior Wi-Fi

network or a cellular network.

Large updates are downloaded only via the Wi-Fi

network.

The availability of an update is notified on the

screen at the end of the journey with an option

of immediate installation or postponement of

installation.

The installation time is variable and can take

several minutes with a maximum of about 30

minutes. A notification will give an estimate of the

duration and a description of the update.

Update information is available through the

“Settings” application.

Press the "

Settings

" application.

In the list, select the "

Updates

” tab.

This button allows you to change the

authorisation for automatic downloading

of updates via an external Wi-Fi network.

For safety reasons and because it

requires sustained attention by the driver,

the installation must be carried out with the

ignition on without starting the engine.

The installation cannot be carried out in the

following cases:

– engine running.

– emergency call in progress.

– insufficient battery level.

– when charging for electric vehicles.

If an update has failed or has expired, contact a

dealer or a qualified workshop.

The use of this service is not charged by

the Contractor.

On the other hand, the use of the WI-FI and/

or cellular networks of your smartphone can

generate additional fees if your data plan is

exceeded.

These possible costs are reflected in the bill

of your telephone operator.

Personalisation

Press and hold the screen from one of the

system's home pages.

Or

Press the “

Settings

” application.

In the list, select the "

Customisation

" tab.

Press the "

Displays

" field.

A page divided into 2 parts is displayed.

Press the "HOME" button at any time to leave

this page.

Personalising the screen

Press the pencil in the "

Customise

Touchscreen

" part.

A representation of the organisation of the

different home page (

HOME

) Widgets is

displayed.

A Widget is a reduced window of an

application or a service.

Adding a Widget

To add a Widget, press "

Add Widget

" on

the left of the screen.

Or

Press one of these buttons on the screen.

Select the desired Widget.

Press the back arrow to return to the

previous page.

189

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

10

Organising the Widgets on a home

page (HOME)

To move a Widget, press and hold it, then drag it

to the desired location.

Adding a page

To add a page, press "

Page

" on the left of

the screen.

Press the back arrow to return to the

previous page.

Deleting a Widget

To move a Widget to the bin, press and

hold it, then drag it to the bin.

Personalising the

instrument panel

Press the pencil in the "

Customise

Driver Information

" section.

The modification of the organisation of the

different Widget is displayed on the instrument

panel in real time.

A Widget is a reduced window of an

application or a service.

Adding a Widget

To add a Widget, press "

Add Widget

" on

the left of the screen.

Or

Press one of these buttons on the screen.

Select the desired Widget.

Press the back arrow to return to the

previous page.

Deleting a Widget

To move a Widget to the bin, press and

hold it, then drag it to the bin.

Personalising My shortcuts

(depending on equipment)

From the edge of the screen, swipe right to

display the shortcuts.

A representation of six shortcuts appears.

These shortcuts can be used to access

an application (air-conditioning page,

radio page, etc.) or to launch an action

(temperature at 21°, call a person selected in

their directory, etc.).

Briefly press a shortcut to be replaced, a panel is

displayed with all eligible shortcuts. A notification

also informs you of the next step to be applied.

Select the desired new shortcut. It will be

duplicated in My Shortcuts and will replace the

originally selected one. You will also be notified.

To exit this function at any time, press this

button or the main button "Home".

Steering-mounted

controls

Voice control

:

Short press, system voice commands

(depending on equipment).

Long press, voice commands of

the smartphone connected using Bluetooth

®

or

Mirror Screen

®

(Apple

®

CarPlay

®

/Android Auto)

via the system.

Increase volume.

Decrease volume.

Mute the sound: long press on the

decrease volume button.

Restore the sound by pressing one of the two

volume buttons.

Incoming call

(short press): accept the

call.

Call in progress

(short press): hang up.

Incoming call

(long press): refuse the incoming

call.

Out of call

(short press): access the call log of

the telephone connected via Bluetooth

®

.

190

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

Mirror Screen

®

connected

(short press): access

the projected view of the telephone application of

your Mirror Screen

®

equipment.

Radio

: automatic search for the

previous/next station (in the list of

radio stations sorted by name or by frequencies).

Media

: previous/next track, movement in the

lists.

Phone

: browse the telephone's call log.

Short press

: validation of a selection. Out of

selection, display the lists.

Applications

From the home page, press this button to

access the applications wall.

From any page, press the touch screen

with three or more fingers to display the

applications wall.

Help

Access the handbook and watch tutorials.

Media

Select an audio source or radio station.

Mirror Screen

®

Smartphone connected with Mirror

Screen

®

: access the projected view of

Apple

®

CarPlay

®

or Android Auto.

Smartphone not connected: access the menu

allowing you to connect a smartphone.

Navigation

(depending on equipment)

Enter navigation settings and choose a

destination.

Use services available in real time, depending on

equipment.

Voice commands

(depending on equipment)

Use the system or smartphone voice recognition

via the system.

Phone

Telephone not connected: access the

menu allowing you to connect a telephone.

Telephone connected: access the call log,

contacts and telephone settings.

Two connected telephones: access the contents

of the priority telephone with the possibility of

changing the priority of the telephone.

Settings

Main settings for the audio system, touch

screen and digital instrument panel.

Voice commands

First steps

(depending on equipment)

The voice recognition service offers a choice

of 17 languages minimum (French, German,

English (UK), English (US), Arabic, Brazilian,

Chinese, Spanish, Hebrew, Italian, Japanese,

Dutch, Polish, Portuguese, Russian, Swedish,

Turkish) available with the cellular network and

in line with the language chosen and previously

configured in the system.

The system supports two languages for cases

where the area in which the vehicle is travelling

is not covered by the cellular network.

These languages, referred to as on-board

languages, are downloaded into the system.

If the chosen language has not been

downloaded, a message on the screen appears

as soon as the cellular network is not connected

for the first time and offers to download it.

To use this new language in all areas, download

it beforehand (ignition on without starting the

engine) via the Wi-Fi network.

Apply the download procedure displayed on the

screen.

Downloading this new language removes the

least used on-board language.

Information - Using the

system

When voice commands are activated, say

your command after the audible signal.

For commands in several stages, interaction

takes place with the system to complete the

initial request.

Some commands self-validate after 7 seconds.

If the system has not taken your command into

account, it will indicate this by a voice message

and an on-screen display.

191

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

10

Opening voice recognition

Voice commands can be used on any

screen page, provided there are no other

sources which take priority in use (reverse,

emergency or assistance call, telephone call,

other smartphone voice recognition already

launched).

Choice of opening voice recognition:

► Say “Hello Citroën”.

or

► Press the button located on the steering

wheel.

or

► Press the touch screen button.

To ensure that voice commands are

always recognised by the system, please

follow these recommendations:

–

use natural language in a normal tone

without breaking up words or raising your

voice.

– After opening voice recognition with the

button on the steering wheel or the touch

screen button, always wait for the "beep"

(sound signal) before speaking. No "beep"

sounds when voice recognition is activated

with "Hello Citroën".

– for optimal operation, it is recommended

that you close the windows and the sunroof

(depending on equipment) to avoid any

external interference, and switch the

ventilation off.

– before speaking the voice commands, ask

the other passengers not to speak.

Voice command example for air

conditioning:

"raise the fan speed"

"Turn on air conditioning"

"i'm too hot"

Voice command example for radio and

media:

"I want to listen to michael jackson"

"switch to radio"

"tune to 88.5"

Media voice commands are only

available with a USB connection.

Voice command example for navigation:

"navigate home"

"Navigate me to gabrielle's house"

"search for public parking nearby"

Depending on the country, give

destination (address) instructions in the

language configured for the system.

Voice command example for telephone:

"Call Matthew's mobile"

"call 0113 345 9869"

"Call jonathan"

If there is no telephone connected by

Bluetooth

®

, a voice message announces:

"Connect a telephone by Bluetooth

®

", and the

voice session will be closed.

Voice command example for the weather:

"do i need a raincoat"

"how is the weather tonight"

"what is today's humidity level"

Navigation

Navigation home screen

(depending on equipment)
Access to additional videos

https://www.tomtom.com/

PSAGroup-Connected-Nav

Press the "

Navigation

" application to

display the navigation home screen.

Press "

Search

" to enter an address or a

name.

Press this button to display the main

menu of the various options.

Press this button to display the 3D/2D

mode.

Select "

Sound activated

", "

Alerts only

"

and "

Silent

" with successive presses on

this button.

Press the "plus"/"minus" buttons to zoom

in/out, or use two fingers on the screen.

192

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

Main menu

Press the “

Navigation

” application to

display the navigation home screen.

Press this button to display the main

menu of the various options.

Select “

Search

” to enter an address,

name or certain points of interest.

Select “

Go home

” using an address

previously saved in "

Add home

".

Select “

Go to work

” using an address

previously saved in "

My places

".

Select “

Recent destinations

” to display

the latest destinations searched.

Select “

Current trip

” to open another

menu and perform various actions on the

current route planned.

Select “

My places

” for quick access to

saved places as well as

favourite destinations.

Select “

My trips

” to display the preferred

routes.

Select “

Parking

” to display the various

parking options in the region.

Select “

Service station

” to display the

different service stations on the current

route or near the current location.

Select “

TomTom service

” to access the

network status.

Select "

Settings

" to enter the vehicle type

and to personalise the display, voice

instructions, map options, trip planning, sounds

and alerts, and system information.

Select this button to display details on

software versions as well as legal

information. Details of the Open Source software

libraries used and their licence URLs.

Regular connection to a Wi-Fi terminal

automatically updates the map.

The mapping update can also be carried out

via a cellular network, depending on version,

depending on country of sale, depending on

the level of equipment of the vehicle, as well

as the subscription to connected services and

options.

Connectivity

Connecting a wired device

by USB

The USB connection of a portable device allows

it to be recharged. It makes its authorised media

content available to the system (Media content

of iPod

®

type).

A single USB socket allows the Mirror

Screen connection (Apple

®

CarPlay

®

or

Android Auto) for compatible connected

portable devices and to use certain applications

from the device on the touch screen.

For more information on the USB socket

compatible with the Mirror Screen

®

function,

refer to the “Ease of use and comfort - Fittings”

section.

The portable device is in charging mode when

connected with the USB cable.

It is recommended that you use the

original USB cables of your devices,

preferably with a minimal cable length to

ensure optimum performance.

To protect the system, do not use a USB

hub.

Bluetooth

®

connection

The Bluetooth

®

connection of a portable device

to the vehicle's system provides access to its

contents and “Media” broadcasts. It also enables

the Phone function to be activated.

The connection can be initiated either from the

portable device's Bluetooth

®

menu or from the

vehicle's system, which requires opening the "My

Devices" menu for the first connection.

In some cases, you may need to unlock

your device as well as check

authorization when synchronizing contacts

and recent calls.

Some features may not be supported by

your device.

For information on the partial or full

compatibility of device models or

smartphones, please connect to the Brand’s

national website.

193

MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS

10

Pairing procedure from a device

From the Bluetooth

®

menu on your

portable device, select the system’s name

from the list of detected devices.

In order to make your system’s

Bluetooth

®

visible, first open the "

My

Devices

" menu on the system.

Continue the first connection procedure

proposed by the system and on the device.

For example: validations of the pairing codes.

Pairing procedure from the system

Press the "

Settings

" application.

In the list, select the "

Connectivity

” tab.

Select "

My Devices

".

Select the name of the portable device

you want to connect from:

– The list of known devices (if the device has

already been connected to the system).

or

– The list of detected devices (if the device

has never been connected to the system or

previously deleted from the system).

A portable device already connected to

the system will be able to reconnect

automatically when the vehicle is started once

the user profile has been selected.

Automatic reconnection is put on hold as

soon as the "My Devices" menu is opened.

This is to allow the system to make its

Bluetooth

®

visible for the connection of a new

device.

The system is disconnected when the driver’s

door is opened and the ignition is switched

off.

Automatic reconnection

The system allows automatic reconnection of

devices already connected and detected when a

user profile is selected.

The priority reconnected devices are those which

have been linked to the selected user profile or,

failing this, the last connected devices.

Wi-Fi connection

The system has an external Wi-Fi connection

mode for performing system updates.

Press the "

Settings

" application.

In the list, select the "

Connectivity

” tab.

Select "

Wi-Fi

".

Activate/Deactivate "

Wi-Fi

".

The system starts a search for

nearby Wi-Fi networks. This may take a few

seconds.

Select the Wi-Fi network to connect to and enter

its password.

To protect your system, only networks

with a sufficient level of security are

allowed to connect. WPA2 encryption level,

equivalent to a domestic level, is required.

Any network already connected to the

system will reconnect automatically as

soon as it is detected by the system and after

having previously activated the Wi-Fi function.

The Wi-Fi connection of the system to a

device already connected using a Mirror

Screen

®

wireless connection is not possible.

In this case, favour a Mirror

Screen

®

connection using the USB socket.

Device management

For each device already connected to the

system using a wireless connection (Bluetooth

®

or wireless Mirror Screen

®

connection), it is

possible to determine a preferred connection

mode (depending on the functions the device

can support). It is therefore possible to determine

whether the device should be connected using

a wireless Bluetooth

®

connection or a wireless

Mirror Screen

®

connection each time the system

is started once the profile is chosen.

Press the "

Settings

" application.

In the list, select the "

Connectivity

".

Select "

My Devices

" to display the list of

paired devices.

Press this button to manage the

connection of a device.