Renault Alaskan (2017 year). Instruction — part 7
3
Pre-driving checks and adjustments
Pre-driving checks and adjustments
Keys . . . . . . . . . . . . . . . . . . 3-2
Key (where fitted) . . . . . . . . . . . ... 3-2
Anti-Theft System (ATS*) key (where fitted) . . 3-2
Remote Control Key (where fitted). . . . . .. 3-2
Doors . . . . . . . . . . . . . . . . . .. 3-4
Locking with key. . . . . . . . . . . . . 3-4
Opening with inside door handle. . . . . . . 3-4
Locking with power door lock switch . . . . .. 3-4
Rear access doors (King Cab models). . . . 3-5
Child safety rear door locks (Double Cab
models) . . . . . . . . . . . . . . . .. 3-5
Remote keyless entry system (where fitted). . . .. 3-6
Using remote keyless entry system . . . . . . 3-6
Remote Control Key system (where fitted) . . . ... 3-7
Remote Control Key operating range . . . . .. 3-9
Using Remote Control Key system. . . . . .. 3-9
Battery saver system. . . . . . . . . . ... 3-10
Warning and audible reminders . . . . . . .. 3-11
Troubleshooting guide . . . . . . . . . . 3-12
Using remote keyless entry system . . . . . . 3-14
Hazard indicator and horn operation. . . . . 3-15
Security system (where fitted). . . . . . . . .. 3-15
Theft warning system (where fitted). . . . . . 3-15
Anti-Theft System (ATS) . . . . . . . . . . 3-16
Bonnet. . . . . . . . . . . . . . . . . . 3-17
Opening bonnet. . . . . . . . . . . . .. 3-17
Closing bonnet . . . . . . . . . . . . ... 3-17
Fuel filler lid and cap. . . . . . . . . . . . 3-18
Opening fuel filler lid. . . . . . . . . . ... 3-18
Fuel filler cap. . . . . . . . . . . . . .. 3-18
AdBlue® filler lid and cap . . . . . . . . . . 3-19
Opening AdBlue® filler lid . . . . . . . . .. 3-20
Locking AdBlue® filler lid . . . . . . . . ... 3-20
AdBlue® filler cap . . . . . . . . . . . .. 3-20
Cargo bed (where fitted). . . . . . . . . . .. 3-20
Tailgate . . . . . . . . . . . . . . . .. 3-20
Tie down hooks (where fitted). . . . . . . . 3-21
C-Channel system (where fitted). . . . . . . 3-21
Steering wheel. . . . . . . . . . . . . . . 3-23
Steering wheel adjustment. . . . . . . . .. 3-23
Mirrors. . . . . . . . . . . . . . . . . . 3-23
Inside rearview mirror . . . . . . . . . . . 3-23
Outside rearview mirrors. . . . . . . . . . 3-25
Vanity mirror (where fitted). . . . . . . . .. 3-26
Parking brake . . . . . . . . . . . . . . .. 3-26
A key number plate is supplied with your key. Record
the key number on the key number plate/metal tag
and keep it in a safe place (such as your wallet),
NOT IN THE VEHICLE. RENAULT does not record
key numbers so it is very important to keep track of
your key number plate.
A key number is only necessary when you have lost
all keys and do not have one to duplicate from. If you
still have a key, this key can be duplicated by an
approved dealer or qualified workshop.
KEY (where fitted)
1. Master key (with integrated key fob) (2)
2. Key number plate (1)
As many as 5 master keys with integrated key fob
can be registered and used with one vehicle.
ANTI-THEFT SYSTEM (ATS*) KEY
(where fitted)
1. ATS key (molded) (2)
2. Key number plate (1)
1. ATS key (with integrated key fob) (2)
2. Key number plate (1)
Your vehicle can only be driven with the ATS keys,
which are registered to your vehicle’s ATS compo-
nents. As many as 5 ATS keys can be registered
and used with one vehicle. The new keys must be
registered by an approved dealer or qualified work-
shop prior to use with the ATS of your vehicle. Since
the registration process requires erasing all memory
in the ATS components when registering new keys,
be sure to take all ATS keys that you have to the
approved dealer or qualified workshop.
CAUTION
Do not allow the ATS key, which contains an elec-
trical transponder, to come into contact with wa-
ter or salt water. This could affect the system
function.
*: Immobilizer
REMOTE CONTROL KEY
(where fitted)
1. Remote Control Key (2)
JVP0324XZ
JVP0085XZ
JVP0324XZ
SPA2502Z
KEYS
3-2
Pre-driving checks and adjustments
2. Mechanical key (inside Remote Control Key)
(2)
3. Key number plate (1)
WARNING
•
The Remote Control Key transmits radio
waves that can adversely affect medical elec-
tric equipment.
•
If you have a pacemaker, you should contact
the medical equipment manufacturer to ask if
it will be affected by the Remote Control Key
signal.
Your vehicle can only be driven with the Remote
Control Keys which are registered to your vehicle’s
Remote Control Key system components and Anti-
Theft System (ATS*) components. As many as 4
Remote Control Keys can be registered and used
with one vehicle. The new keys must be registered
by an approved dealer or qualified workshop prior
to use with the Remote Control Key system and
ATS of your vehicle. Since the registration process
requires erasing all memory in the Remote Control
Key system components when registering new keys,
be sure to take all Remote Control Keys that you
have to an approved dealer or qualified workshop.
*: Immobilizer
CAUTION
•
Be sure to carry the Remote Control Key with
you. Do not leave the vehicle with the Remote
Control Key inside.
•
Be sure to carry the Remote Control Key with
you when driving. The Remote Control Key is
a precision device with a built-in transmitter.
To avoid damaging it, please note the follow-
ing.
– The Remote Control Key is water resistant;
however, wetting may damage the Remote
Control Key. If the Remote Control Key
gets wet, immediately wipe until it is com-
pletely dry.
– Do not bend, drop or strike it against an-
other object.
– If the outside temperature is below -10°C
(14°F), the battery of the Remote Control
Key may not function properly.
– Do not place the Remote Control Key for
an extended period in a place where tem-
peratures exceed 60°C (140°F).
– Do not change or modify the Remote Con-
trol Key.
– Do not use a magnet key holder.
– Do not place the Remote Control Key near
equipment that produces a magnetic field
such as a TV, audio equipment and per-
sonal computers.
– Do not allow the Remote Control Key to
come into contact with water or salt water,
and do not wash it in a washing machine.
This could affect the system function.
•
If a Remote Control Key is lost or stolen,
RENAULT recommends erasing the ID code
of that Remote Control Key. This will prevent
the Remote Control Key from unauthorised
use to unlock the vehicle. For information re-
garding the erasing procedure, please con-
tact an approved dealer or qualified work-
shop.
Mechanical key
To remove the mechanical key, release the lock knob
on the back of the Remote Control Key.
To install the mechanical key, firmly insert it into the
Remote Control Key until the lock knob returns to
the lock position.
Use the mechanical key to lock or unlock the doors
and tailgate (where fitted). (See “Doors” later in this
section and “Tailgate” later in this section.)
SPA2033Z
Pre-driving checks and adjustments
3-3
WARNING
•
Always look before opening any doors, to
avoid an accident with oncoming traffic.
•
To help avoid risk of injury or death through
unintended operation of the vehicle and/or its
systems, do not leave children, people who
require the assistance of others, or pets unat-
tended in your vehicle. Additionally, the tem-
perature inside a closed vehicle on a warm
day can quickly become high enough to cause
a significant risk of injury or death to people
and pets.
LOCKING WITH KEY
To lock the door, insert the mechanical key to the
door key cylinder and turn the key to the front side
of the vehicle
➀
.
To unlock the door, turn the key to the rear of the
vehicle
➁
.
OPENING WITH INSIDE DOOR
HANDLE
To unlock and open the door pull the inside door
handle as illustrated.
For models with Super Lock System:
The doors cannot be opened by using the inside
door handle when the Super Lock System is acti-
vated.
LOCKING WITH POWER DOOR
LOCK SWITCH
Operating the power door lock switch (located on
the driver’s door) will lock or unlock all the doors.
To lock the doors, push the power door lock switch
to the lock position
➀
with the driver’s door open,
then close the door. All doors will lock.
SPA2588Z
SPA2791Z
SPA2803Z
SPA2390Z
DOORS
3-4
Pre-driving checks and adjustments
CAUTION
•
When locking the doors using the power door
lock switch, be sure not to leave the key in the
vehicle.
•
When the Remote Control Key (where fitted)
is left in the vehicle, and you try to lock the
door using the power door lock switch after
getting out of the vehicle, all the doors will
unlock automatically after the door is closed.
To unlock, push the power door lock switch to the
unlock position
➁
.
REAR ACCESS DOORS (King Cab
models)
1. Open the driver’s or passenger’s door.
2. From the inside, pull the door handle
j
A toward
the front of the vehicle.
3. Open the door to the desired position.
CHILD SAFETY REAR DOOR LOCKS
(Double Cab models)
The child safety rear door locks help prevent rear
doors from being opened accidentally, especially
when small children are in the vehicle.
JVP0322XZ
JVP0321XZ
JVP0323XZ
JVP0279XZ
Pre-driving checks and adjustments
3-5
When the levers are in the lock position
➀
, the
child safety rear door locks engage and the rear
doors can only be opened by the outside door
handles.
To disengage, move the levers to the unlock posi-
tion
➁
.
The remote keyless entry system can operate all
door locks using the integrated key fob. The inte-
grated key fob can operate at a distance of approxi-
mately 1 m (3.3 ft) away from the vehicle. The oper-
ating distance depends upon the conditions around
the vehicle.
As many as 5 integrated key fobs can be used with
one vehicle. For information about the purchase and
use of additional integrated key fobs, contact an
approved dealer or qualified workshop.
The integrated key fob will not function under the
following conditions:
•
When the distance between the integrated key
fob and vehicle is more than approximately 1 m
(3.3 ft).
•
When the integrated key fob battery is
discharged.
•
When the key is in the ignition switch.
CAUTION
•
When locking the doors using the integrated
key fob, be sure not to leave the key in the
vehicle.
•
Do not allow the integrated key fob, which
contains electrical components, to come into
contact with water or salt water. This could
affect the system function.
•
Do not drop the integrated key fob.
•
Do not strike the remote controller sharply
against another object.
•
Do not place the integrated key fob for an
extended period in an area where tempera-
tures exceed 60°C (140°F).
If a integrated key fob is lost or stolen, RENAULT
recommends erasing the ID code of that integrated
key fob from the vehicle. This may prevent the
unauthorised use of the integrated key fob to unlock
the vehicle. For information regarding the erasing
procedure, contact an approved dealer or qualified
workshop.
For information regarding the replacement of a bat-
tery, see “Remote controller battery replacement” in
the “8. Maintenance and do-it-yourself” section.
USING REMOTE KEYLESS ENTRY
SYSTEM
WARNING
For Super Lock System equipped models, failure
to follow the precautions below may lead to haz-
ardous situations. Make sure the Super Lock Sys-
tem activation is always safely conducted.
•
When the vehicle is occupied, never lock the
doors with the integrated key fob. Doing so
will trap the occupants, since the Super Lock
System prevents the doors from being opened
from the inside of the vehicle.
•
Only operate the integrated key fob lock but-
ton when there is a clear view of the vehicle.
This is to prevent anybody from being trapped
inside the vehicle through the Super Lock
System activation.
REMOTE KEYLESS ENTRY
SYSTEM (where fitted)
3-6
Pre-driving checks and adjustments
➀
LOCK button
➁
UNLOCK button
➂
Battery indicator light
Locking doors
1. Remove the ignition key.
2. Close all doors.
3. Push the LOCK
button
➀
on the inte-
grated key fob.
4. All doors and the AdBlue® filler lid will be locked.
5. Operate door handles to confirm that the doors
have been securely locked.
CAUTION
After locking the doors using the integrated key
fob, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doors
1. Push the UNLOCK
button
➁
on the inte-
grated key fob.
2. All doors and the AdBlue® filler lid will be un-
locked.
All doors will be locked automatically unless one of
the following operations is performed within 30 sec-
onds after pushing the UNLOCK
button
➁
.
•
Opening any doors.
•
Inserting the key into the ignition switch.
Battery indicator light
The battery indicator light
➂
illuminates when you
push any button. If the light does not illuminate, the
battery is weak or needs replacement. For informa-
tion regarding replacement of a battery, see “Re-
mote controller battery replacement” in the “8. Main-
tenance and do-it-yourself” section.
Hazard indicator operation
When you lock or unlock the doors, the hazard indi-
cator will flash as a confirmation.
•
LOCK: The hazard indicator flashes once.
•
UNLOCK: The hazard indicator flashes twice.
WARNING
•
Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible in-
fluences before use.
•
The Remote Control Key transmits radio
waves when the buttons are pushed. The ra-
dio waves may affect aircraft navigation and
communication systems. Do not operate the
Remote Control Key while on an aeroplane.
Make sure the buttons are not operated unin-
tentionally when the unit is stored during a
flight.
The Remote Control Key system can operate all
doors using the integrated key fob function or push-
ing the request switch on the vehicle without taking
the key out from a pocket or purse. The operating
environment and/or conditions may affect the Re-
mote Control Key system operation.
Be sure to read the following before using the Re-
mote Control Key system.
CAUTION
•
Be sure to carry the Remote Control Key with
you when operating the vehicle.
•
Never leave the Remote Control Key in the
vehicle when you leave the vehicle.
JVP0222XZ
REMOTE CONTROL KEY SYSTEM
(where fitted)
Pre-driving checks and adjustments
3-7
The Remote Control Key is always communicating
with the vehicle as it receives radio waves. The Re-
mote Control Key system transmits weak radio
waves. Environmental conditions may interfere with
the operation of the Remote Control Key system
under the following operating conditions.
•
When operating near a location where strong
radio waves are transmitted, such as a TV tower,
power station and broadcasting station.
•
When in possession of wireless equipment, such
as a mobile telephone, transceiver, and CB ra-
dio.
•
When the Remote Control Key is in contact with
or covered by metallic materials.
•
When any type of radio wave remote control is
used nearby.
•
When the Remote Control Key is placed near an
electric appliance such as a personal computer.
In such cases, correct the operating conditions be-
fore using the Remote Control Key function or use
the mechanical key.
Although the life of the battery varies depending on
the operating conditions, the battery’s life is approxi-
mately 2 years. If the battery is discharged, replace
it with a new one.
For information regarding replacement of a battery,
see “Remote Control Key battery replacement” in
the “8. Maintenance and do-it-yourself” section.
Since the Remote Control Key is continuously re-
ceiving radio waves, if the key is left near equipment
which transmits strong radio waves, such as signals
from a TV and personal computer, the battery life
may become shorter.
Because the steering wheel is locked electrically,
unlocking the steering wheel with the ignition switch
in the LOCK position is impossible when the vehicle
battery is completely discharged. Pay special atten-
tion that the vehicle battery is not completely dis-
charged.
As many as 4 Remote Control Keys can be regis-
tered and used with one vehicle. For information
about the purchase and use of additional Remote
Control Keys, contact an approved dealer or quali-
fied workshop.
CAUTION
•
Do not allow the Remote Control Key, which
contains electrical components, to come into
contact with water or salt water. This could
affect the system function.
•
Do not drop the Remote Control Key.
•
Do not strike the Remote Control Key sharply
against another object.
•
Do not change or modify the Remote Control
Key.
•
Wetting may damage the Remote Control Key.
If the Remote Control Key gets wet, immedi-
ately wipe until it is completely dry.
•
If the outside temperature is below −10°C
(14°F), the battery of the Remote Control Key
may not function properly.
•
Do not place the Remote Control Key for an
extended period in an area where tempera-
tures exceed 60°C (140°F).
•
Do not attach the Remote Control Key to a
key holder that contains a magnet.
•
Do not place the Remote Control Key near
equipment that produces a magnetic field,
such as a TV, audio equipment and personal
computers.
If an Remote Control Key is lost or stolen, RENAULT
recommends erasing the ID code of that Remote
Control Key from the vehicle. This may prevent the
unauthorised use of the Remote Control Key to op-
erate the vehicle. For information regarding the eras-
ing procedure, contact an approved dealer or quali-
fied workshop.
The Remote Control Key function can be disabled.
For information about disabling the Remote Control
Key function, contact an approved dealer or quali-
fied workshop.
3-8
Pre-driving checks and adjustments
REMOTE CONTROL KEY
OPERATING RANGE
The Remote Control Key functions can only be used
when the Remote Control Key is within the speci-
fied operating range from the request switch
➀
.
When the Remote Control Key battery is discharged
or strong radio waves are present near the operat-
ing location, the Remote Control Key system’s op-
erating range becomes narrower, and the Remote
Control Key may not function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
➀
.
If the Remote Control Key is too close to the door
glass or door handle, the request switches may not
function.
When the Remote Control Key is within the operat-
ing range, it is possible for anyone, even someone
who does not carry the Remote Control Key, to
push the request switch to lock/unlock the doors.
USING REMOTE CONTROL KEY
SYSTEM
The request switch will not function under the fol-
lowing conditions:
•
When another Remote Control Key is left inside
the vehicle
•
When the Remote Control Key is not within the
operational range
•
When any door is open or not closed securely
•
When the Remote Control Key battery is dis-
charged
•
When the ignition switch is in the ACC or ON
position
The Remote Control Key system (opening/closing
doors with the door handle request switch) can be
set to remain inactive. (See “[Vehicle Settings]” in
the “2. Instruments and controls” section.)
•
Do not push the door handle request switch with
the Remote Control Key held in your hand as
illustrated. The close distance to the door handle
will cause the Remote Control Key system to
have difficulty recognising that the Remote Con-
trol Key is outside the vehicle.
•
After locking the doors using the door handle
request switch, make sure that the doors have
been securely locked by operating the door
handles.
•
When locking the doors using the door handle
request switch, make sure to have the Remote
Control Key in your possession before operating
the door handle request switch to prevent the
Remote Control Key from being left in the ve-
hicle.
•
The door handle request switch is operational
only when the Remote Control Key has been
detected by the Remote Control Key system.
JVP0312XZ
NIC3086
SPA2407Z
Pre-driving checks and adjustments
3-9
•
Do not pull the door handle before pushing the
door handle request switch. The door will be
unlocked but will not open. Release the door
handle once and pull it again to open the door.
When you carry the Remote Control Key with you,
you can lock or unlock all doors by pushing the door
handle request switch
➀
(driver’s or front passen-
ger’s door) within the range of operation.
When you lock or unlock the doors, the hazard indi-
cator will flash as a confirmation.
Locking doors
1. Push the ignition switch to the OFF position.
2. Carry the Remote Control Key with you.
3. Close all doors.
4. Push the door handle request switch
➀
(driv-
er’s or front passenger’s door).
5. All doors and the AdBlue® filler lid will be locked.
6. Operate door handles to confirm that the doors
have been securely locked.
Lockout protection:
To prevent the Remote Control Key from being acci-
dentally locked in the vehicle, lockout protection is
equipped with the Remote Control Key system.
•
When the Remote Control Key is left in the ve-
hicle and you try to lock the door using the power
door lock switch after getting out of the vehicle,
all the doors will unlock automatically and a chime
will sound after the door is closed.
CAUTION
The lockout protection may not function under
the following conditions:
•
When the Remote Control Key is placed on
top of the instrument panel.
•
When the Remote Control Key is placed in-
side of the glove box.
•
When the Remote Control Key is placed in-
side of the door pockets.
•
When the Remote Control Key is placed in-
side or near metallic materials.
The lockout protection may function when the
Remote Control Key is outside the vehicle but is
too close to the vehicle.
Unlocking doors
1. Carry the Remote Control Key with you.
2. Push the door handle request switch
➀
.
3. All doors and the AdBlue® filler lid will be un-
locked.
If a door handle is pulled while unlocking the doors,
that door may not be unlocked. Returning the door
handle to its original position will unlock the door. If
the door does not unlock, after returning the door
handle, push the door handle request switch to un-
lock the door.
Automatic relock:
All doors will be locked automatically unless one of
the following operations is performed within 30 sec-
onds after pushing the request switch while the
doors are locked.
•
Opening any doors.
•
Pushing the ignition switch.
If during the preset time period the UNLOCK
button on the Remote Control Key is pushed, all
doors will be locked automatically after the next pre-
set time.
BATTERY SAVER SYSTEM
When all the following conditions are met for a pe-
riod of time, the battery saver system will cut off the
power supply to prevent battery discharge.
•
The ignition switch is in the ACC position, and
•
All doors are closed, and
NIC3087
3-10
Pre-driving checks and adjustments
•
The shift lever is in the P (Park) position (auto-
matic transmission model).
WARNING AND AUDIBLE
REMINDERS
The Remote Control Key system is equipped with a
function that is designed to minimise improper op-
erations of the Remote Control Key and to help pre-
vent the vehicle from being stolen. A chime or beep
sounds inside and outside the vehicle and a warning
message appears in the vehicle information display.
See the troubleshooting guide on the next page and
“Vehicle information display” in the “2. Instruments
and controls” section.
CAUTION
When the chime or beep sounds or the warning
message appears, be sure to check both the ve-
hicle and the Remote Control Key.
Pre-driving checks and adjustments
3-11
TROUBLESHOOTING GUIDE
Symptom
Possible cause
Action to take
When pushing the ignition switch to
stop the engine
The Shift to Park warning appears in
the vehicle information display and the
inside warning chime sounds continu-
ously or for a few seconds.
(Automatic Transmission models)
The shift lever is not in the P (Park)
position.
Shift the shift lever to the P (Park)
position.
When shifting the shift lever to the P
(Park) position
The inside warning chime sounds
continuously. (Automatic Transmis-
sion models)
The ignition switch is in the ACC or
ON position.
Push the ignition switch to the OFF
position.
When opening the driver’s door to get
out of the vehicle
The inside warning chime sounds
continuously.
The ignition switch is in the ACC posi-
tion.
Push the ignition switch to the OFF
position.
When closing the door after getting
out of the vehicle
The No Key Detected warning
appears on the display, the outside
chime sounds 3 times and the inside
warning chime sounds for a few
seconds.
The ignition switch is in the ACC or
ON position.
Push the ignition switch to the OFF
position.
The Shift to Park warning appears in
the vehicle information display and the
outside chime sounds continuously.
(Automatic Transmission models)
The ignition switch is in the ACC or
OFF position and the shift lever is not
in the P (Park) position.
Move the shift lever to the P (Park)
position and push the ignition switch
to the OFF position.
When pushing the request switch or
the LOCK
m
button on the
Remote Control Key to lock the door
The outside chime sounds for a few
seconds and all the doors unlock.
The Remote Control Key is inside the
vehicle.
Carry the Remote Control Key with
you.
When closing the door with the inside
lock knob turned to LOCK
The outside chime sounds for a few
seconds and all the doors unlock.
The Remote Control Key is inside the
vehicle.
Carry the Remote Control Key with
you.
3-12
Pre-driving checks and adjustments
Symptom
Possible cause
Action to take
When pushing the door handle
request switch to lock the door
The outside chime sounds for a few
seconds.
The Remote Control Key is inside the
vehicle.
Carry the Remote Control Key with
you.
A door is not closed securely.
Close the door securely.
The door handle request switch is
pushed before the door is closed.
Push the door handle request switch
after the door is closed.
When pushing the ignition switch to
start the engine
The Key Battery low warning appears
in the vehicle information display.
The battery charge is low.
Replace the battery with a new one.
(See “Remote Control Key battery
replacement” in the “8. Maintenance
and do-it-yourself” section.)
The No Key Detected warning
appears in the display and the inside
warning chime sounds for a few
seconds.
The Remote Control Key is not in the
vehicle.
Carry the Remote Control Key with
you.
When pushing the ignition switch
The Key System Error warning
appears in the vehicle information
display.
It warns of a malfunction with the
electrical steering lock system (where
fitted) or the Remote Control Key
system.
Contact an approved dealer or quali-
fied workshop.
Pre-driving checks and adjustments
3-13
USING REMOTE KEYLESS ENTRY
SYSTEM
j
A LOCK button
j
B UNLOCK button
Operating range
The remote keyless entry system allows you to lock/
unlock all doors. The operating distance depends
upon the conditions around the vehicle. To securely
operate the lock and unlock buttons, approach the
vehicle to about 1 m (3.3 ft) from the door.
The remote keyless entry system will not function
under the following conditions:
•
When the Remote Control Key is not within the
operational range.
•
When the Remote Control Key battery is dis-
charged.
For information regarding the replacement of a bat-
tery, see “Remote Control Key battery replacement”
in the “8. Maintenance and do-it-yourself” section.
Locking doors
1. Place the ignition switch to the OFF position.
2. Carry the Remote Control Key with you.
3. Close all doors.
4. Push the LOCK
button
j
A on the Remote
Control Key.
5. All doors will be locked.
6. Operate the door handles to confirm that the
doors have been securely locked.
CAUTION
•
After locking the doors using the Remote Con-
trol Key, be sure that the doors have been
securely locked by operating the door
handles.
•
When locking the doors using the Remote
Control Key, be sure not to leave the key in
the vehicle.
Unlocking doors
1. Push the UNLOCK
button
j
B on the Re-
mote Control Key.
2. All doors will be unlocked.
Automatic relock:
All doors will be locked automatically unless one of
the following operations is performed within 30 sec-
onds after pushing the UNLOCK
j
B button on
the Remote Control Key while the doors are locked.
•
Opening any doors.
•
Pushing the ignition switch.
If during the preset time period the UNLOCK
j
B button on the Remote Control Key is pushed, all
doors will be locked automatically after the next pre-
set time.
SPA2349Z
3-14
Pre-driving checks and adjustments
HAZARD INDICATOR AND HORN OPERATION
When you lock or unlock the doors, the hazard indicator will flash and the horn (or the outside chime)
will sound as a confirmation.
The following descriptions show how the hazard indicator and horn/chime will activate when locking or
unlocking the doors.
Your vehicle has either or both of the following se-
curity systems:
•
Theft warning system
•
Anti-Theft System (ATS*)
*: Immobilizer
The security condition will be shown by the security
indicator light.
THEFT WARNING SYSTEM
(where fitted)
The theft warning system provides visual and audio
alarm signals if parts of the vehicle are disturbed.
Security indicator light
The security indicator light, located on the meter
panel, operates whenever the ignition switch is in
the LOCK, OFF or ACC position. This is normal.
Operation
DOOR LOCK
DOOR UNLOCK
Remote Control Key system
(using request switch)
HAZARD - once
OUTSIDE CHIME - once
HAZARD - twice
OUTSIDE CHIME - twice
Remote keyless entry system
(using
m
or
m
button)
HAZARD - once
HORN - once
HAZARD - twice
HORN - twice
SIC2045Z
SECURITY SYSTEM (where fitted)
Pre-driving checks and adjustments
3-15
How to activate system (where fitted)
1. Close all windows.
The system can be armed even if the windows
are open.
2. Place the ignition switch in the OFF position.
3. Carry the integrated key fob or the Remote Con-
trol Key with you and get out of the vehicle.
4. Close and lock all doors. The doors can be
locked with the integrated key fob, the Remote
Control Key, door handle request switch (where
fitted), power door lock switch or mechanical
key.
5. Confirm that the security indicator light comes
on. The security indicator light glows for about
30 seconds and then blinks. The system is now
activated. If, during this 30 second time period,
the door is unlocked or the ignition switch is
placed in the ACC or ON position, the system
will not activate.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all doors
locked with the ignition switch in the LOCK posi-
tion. When pushing the ignition switch to the ACC
or ON position, the system will be released.
Theft warning system operation
The vehicle security system will give the following
alarm:
•
The hazard indicator blinks and the horn sounds
intermittently.
•
The alarm automatically turns off after approxi-
mately 30 seconds. However, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
•
Unlocking the door without using the integrated
key fob, the Remote Control Key, the door handle
request switch (where fitted) or the mechanical
key. (Even if the door is opened by releasing the
door inside lock knob, the alarm will activate.)
How to stop alarm
•
The alarm will stop only by unlocking a door by
pushing the UNLOCK button on the Remote
Control Key.
•
The alarm will not stop if the ignition switch is
placed in the ACC or ON position.
ANTI-THEFT SYSTEM (ATS)
The Anti-Theft System (ATS) will not allow the en-
gine to start without the use of the registered ATS
key.
If the engine does not start using the registered ATS
key, it may be due to interference caused by:
•
Another ATS key.
•
Automated toll road device.
•
Automated payment device.
•
Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the inter-
ference away from the ATS key.
2. Leave the ignition switch in the ON position for
approximately 5 seconds.
3. Place the ignition switch in the OFF or LOCK
position, and wait approximately 10 seconds.
4. Repeat steps 2 and 3 again.
5. Start the engine.
6. Repeat the steps above until all possible interfer-
ences are eliminated.
If this procedure allows the engine to start,
RENAULT recommends placing the registered ATS
key separate from other devices to avoid interfer-
ence.
If ATS is malfunctioning, this light will remain on
while the ignition switch is in the ON position.
If the light remains on and/or the engine does
not start, contact an approved dealer or qualified
workshop for ATS service as soon as possible.
Be sure to bring all Remote Control Keys that you
have when visiting an approved dealer for ser-
vice.
3-16
Pre-driving checks and adjustments
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст