Renault Premium engine. Manual — part 105
8 / 19
Use a drift
(A).
Fit nut
(4).
Tighten to torque.
See page(s) .
Use tool 0484.
If necessary
Use tool 9774.
Fit a new lip seal
(3).
Fit cover
(2).
Tighten to torque.
See page(s) .
Fit a new lip seal
(12).
Fit cover
(11).
Tighten to torque.
See page(s) .
Fit grease nipples
(1).
Grease the kingpin through grease nipples
(1) on the top and bottom cover caps.
Use
SUPEROL HP2
9 / 19
grease.
Move the stub axle around between the two steering lock stops.
Check that the grease passes through all the seals.
Place track rod ball-joint in position.
Retain the ball-joint against rotation using a hexagon
6 wrench (A) and bring nut (B) into contact.
Tighten the nut to torque.
See page(s) .
Disc brakes
Fit axle steering arm
(15).
Tighten to torque.
See page(s) .
Fit the wheel speed sensor bracket .
Tighten to torque.
See page(s) .
Drum brakes
10 / 19
Position the drag link ball-joint.
Retain the ball-joint against rotation using a hexagon
6 wrench (A) and bring nut (B) into contact.
Tighten the nut to torque.
See page(s) .
11 / 19
Fit brake support
(A).
Use tool 9804.
Line up the marks made upon removal.
Fit bolts
(A).
Use tool 6054.
Tighten to torque.
See page(s) .
Withdraw tool 9804.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст