Renault Premium engine. Manual — part 3
9 / 12
In the event of incorrect clearances.
Remove bolt.
Remove adjusting shim .
Hold the caliper in place when unbolting.
10 / 12
Note down the thickness
X engraved on adjusting shim.
Determine the thickness of the new adjustment shim, in order to obtain the recommended clearance.
See pages .
You can superimpose a maximum of 2 adjusting shims, provided that they have the same thickness. Adjusting shims are available with thicknesses of
0.05 by0.05 mm.
11 / 12
Fit shim.
Fit bolt.
Tighten to torque.
See pages .
Hold the caliper in place when tightening.
Again check the clearance between the valve yoke and the arm piston.
Make a mark on the rocker arm when adjustment is finished.
Perform the same operation on all the other cylinders.
12 / 12
Remove tool
A.
A = 6956
Tools
Specific tools
Illustration
RENAULT
TRUCKS part N°
Designation
Manufacturer's
reference N°
Manufacturer's code N°
Scale
Qty
7409996956
CONTROL
1
1
7488840162
WRENCH
2
1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст