Renault Magnum engine. Manual — part 128
21 / 24
The bolts must not be re-used. Use new bolts.
22 / 24
The item numbers indicate the tightening sequence.
Crankshaft pinion securing bolt
(A)
24±4 Nm
Idler gear hub securing bolt
(B)
25±3 Nm + 110±5 °
The bolts must not be re-used. Use new bolts.
Adjustable idler gear hub securing bolt
(C)
35±4 Nm + 120±5 °
Camshaft pinion securing bolt
(D)
45±5 Nm + 90±5 °
(*)Depending on the assembly.
Idler pinion shaft securing bolts
140±10 Nm
Apply a bead of silicone
dia. 2 mm (A) as shown in the drawing. Proceed with assembly within 20 minutes following application of the silicone.
23 / 24
Use a sealing product
ADHESIF SILICONE 7091
.
The item numbers indicate the tightening sequence.
Timing case to cylinder head securing bolts
24±4 Nm
Timing assembly, exploded view
24 / 24
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст