Renault Magnum engine. Manual — part 112
1 / 6
Camshaft, removal
Remove upper timing casing .
See pages .
Turn the engine in the direction of normal running, as far as compression
TDC of N° 1 cylinder (valves of cylinder in balance with valves of N° 6 cylinder).
See pages .
The camshaft top dead centre mark
(TDC) must be positioned between the marks (A) on the camshaft front bearing cap.
2 / 6
Use tool 1380.
Check that the flywheel TDC mark is in line with pointer
(1).
Remove the rocker assembly.
See pages .
3 / 6
Remove bolts
(1) proceeding in the reverse sequence of tightening.
See pages .
Remove washer
(2).
Remove vibration damper
(3) and camshaft pinion (4).
4 / 6
Remove bolts
(1 › 7).
Remove upper half-bearings
(1).
Use tool 0834 + 0857.
Remove bearing half-shells.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст