Renault Magnum engine. Manual — part 102
10 / 24
Check the clearance between the valve yoke and the exhaust rocker arm piston. Turn the piston to ensure that it is properly seated in its housing.
Use a feeler gauge corresponding to the recommended clearance.
See pages .
In the event of rocker arm play or sticking, make the check with a thicker or thinner feeler gauge in order to determine the thickness of the new adjusting
shim.
11 / 24
In the event of incorrect clearances.
Remove bolt.
Remove adjusting shim .
Hold the caliper in place when unbolting.
12 / 24
Note down the thickness
X engraved on adjusting shim.
Determine the thickness of the new adjustment shim, in order to obtain the recommended clearance.
See pages .
You can superimpose a maximum of 2 adjusting shims, provided that they have the same thickness. Adjusting shims are available with thicknesses of
0.05 by0.05 mm.
13 / 24
Fit shim.
Fit bolt.
Tighten to torque.
See pages .
Hold the caliper in place when tightening.
Again check the clearance between the valve yoke and the arm piston.
Make a mark on the rocker arm when adjustment is finished.
Perform the same operation on all the other cylinders.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст