Renault Magnum engine. Manual — part 1
1 / 2
Crankshaft rear seal, removal
Remove flywheel.
See pages .
Remove lip seal.
Use tool 6400 + 0192.
Take care to not damage the crankshaft contact face of the seal during extraction.
Tools
Specific tools
Illustration
RENAULT
TRUCKS part N°
Designation
Manufacturer's
reference N°
Manufacturer's code N°
Scale
Qty
7409990192
PULLER
2
1
7409996400
PULLER
2
1
2 / 2
1 / 3
Crankshaft rear seal, fitting
Clean and carefully inspect the contact faces of seal.
Mount tool 0166.
Check that the tool is correctly placed on the locating dowel before tightening the bolts.
2 / 3
The seal is supplied fitted to a protective ring that is placed on the assembly tool. It is essential to hold the seal to the ring until it is finally
installed in the case.Do not apply grease to the lips.Any gasket that has been removed from its ring must not be re-used.
Fit protective ring
(1) to tool 0166.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст