Renault Magnum engine. Manual — part 124
5 / 24
For values, see "Technical data" chapter.
See pages .
If the backlash is correct, tighten bolts
(10) to torque (see page(s) ).
Use tool 9776.
Lightly oil a new O-ring
(22) and install.
Fit pinion
(21).
Tighten bolts
(20) to torque.
See pages .
6 / 24
Fit pinion
(15) ensuring the position of marks (A - B) / (C - D).
Tighten bolts
(11) to torque following the tightening sequence.
See pages .
7 / 24
Use tool 9776.
Replace O-ring
(8) with a new O-ring.
Depending on the assembly.
Assembly type A
8 / 24
Fit pinion
(7).
Assembly type B
Fit pinion
(7).
Fit bolt.
Tighten to torque.
See pages .
Check the timing.
See pages .
Inspect the backlash of pinions
(7 / 21) - (15 / 21) - (16 / 15).
For values, see "Technical data" chapter.
See pages .
In the event of non-conforming play, adjust timing plate
(24).
See pages .
Clean the flywheel casing
(6).
Clean the joint faces.
Place the engine in a vertical position.
Depending on the assembly.
Apply a bead of silicone.
Apply "
ADHESIF SILICONE 7091
".
See pages
, .
Fit flywheel
(6).
Depending on the assembly.
Tighten bolts
(4) M10 - (5) M14 to torque, following the tightening sequence.
See pages
, .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст