Renault Magnum engine. Manual — part 87
1 / 2
Trailer sockets wiring harness
Code
Function
Connectors
Colour
Number
of tracks
C120
Piloted axle oil level sensor
E04
GR
2
A002
Chassis-cab connection box
XT15
GR
24
A002
Chassis-cab connection box
XT16
SB
2
Trailer sockets wiring harness
2 / 2
1 / 24
Rocker arms, adjustment
Remove the blanking plug.
Position the marks on the camshaft which indicate the number of the cylinder to adjust between the marks on the camshaft front bearing cap.
Use tool
A.
A = 1380
Engine rotation:
anti-clockwise, from the engine flywheel end.
Camshaft marks
2 / 24
Without "Optibrake" / "Optibrake +"
The marks
(B) 1 - 5 - 3 - 6 - 2 - 4 correspond to the recommended inlet valve clearances , to the recommended exhaust valve clearances and to the
recommended pump injector pre-travel distances for each relative cylinder.
Mark
(B) must be positioned in the centre of marks (A) when carrying out the adjustment.
For values, see "Technical data" chapter.
See pages .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст