Daewoo Nubira. Manual — part 246
2D – 26
I
REAR SUSPENSION
DAEWOO V–121 BL4
6. Remove the lock washer, the outer tapered bear-
ing, and the hub assembly.
Installation Procedure
1. Install the hub assembly, the outer tapered bearing,
and the lock washer.
2. Install the spindle nut. Refer to ”Wheel Bearing Ad-
justment” in this section to adjust the wheel bear-
ing.
3. On vehicles equipped with rear disc brakes, install
the rear brake rotor and rear brake caliper. Refer to
Section 4E, Rear Brakes.
4. On vehicles equipped with rear drum brakes, install
the rear brake drum and the brake drum detent
screw. Refer to Section 4E, Rear Brakes.
5. Install the wheel. Refer to Section 2E, Tires and
Wheels.
6. Lower the vehicle.
REAR SUSPENSION 2D – 27
DAEWOO V–121 BL4
UNIT REPAIR
SPRINGS AND INSULATORS
Tools Required
KM–329–A Spring Compressor
Disassembly Procedure
1. Remove the rear strut assembly from the vehicle.
Refer to ”Strut Assembly” in this section.
2. Mount the rear strut assembly into the spring com-
pressor KM–329–A. Ensure that the hooks are
properly seated.
3. Compress the spring.
4. Remove the lock nut from the strut dampener rod.
5. Remove the rear strut mount.
2D – 28
I
REAR SUSPENSION
DAEWOO V–121 BL4
6. Remove the rear spring upper seat, the dust cover,
and the hollow bumper.
7. Release the spring.
8. Remove the rear spring and the rear spring lower
seat.
Assembly Procedure
1. Install the rear spring lower seat and the rear
spring.
REAR SUSPENSION 2D – 29
DAEWOO V–121 BL4
2. Compress the spring.
3. Install the hollow bumper, the dust cover, and the
rear spring upper seat.
4. Install the rear strut mount.
5. Install the lock nut onto the strut dampener rod.
Tighten
Tighten the strut dampener–to–strut mount nut to 75
N
S
m (55 lb–ft).
6. Release the spring.
7. Remove the strut assembly from the spring com-
pressor and install the strut assembly into the ve-
hicle. Refer to”Strut Assembly” in this section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст