Daewoo Nubira. Manual — part 190
9E – 26
I
INSTRUMENT/DRIVER INFORMATION
DAEWOO V–121 BL4
3. Install the audio system trim plate with the screws.
4. Install glove box, driver/passenger knee bolster with
the screws.
5. Connect the negative battery cable.
CUP HOLDER
Removal Procedure
1. Remove the screws and the glove box.
2. Remove the screw and driver/passenger knee bol-
ster.
3. Remove the screws and the cup holder from the
audio system trim plate.
INSTRUMENT/DRIVER INFORMATION 9E – 27
DAEWOO V–121 BL4
Installation Procedure
1. Install the cup holder to the audio system trim plate
with the screws.
Tighten
Tighten the cup holder screws to 2.5 N
S
m (22 lb–in).
2. Install the audio system trim plate with the screws.
3. Install glove box, driver/passenger knee bolster with
the screws.
GLOVE BOX
Removal Procedure
1. Remove the screws at the base of the glove box.
2. Open and remove the glove box.
9E – 28
I
INSTRUMENT/DRIVER INFORMATION
DAEWOO V–121 BL4
Installation Procedure
1. Position the glove box in the instrument panel.
2. Install the glove box with the screws.
Tighten
Tighten the glove box screws to 5.5 N
S
m (49 lb–in).
DIGITAL CLOCK
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the plastic cover to reveal the screws.
3. Remove the screws and the digital clock.
4. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Install the digital clock with the screws.
Tighten
Tighten the digital clock screws to 4 N
S
m (35 lb–in).
3. Install the cluster housing.
4. Connect the negative battery cable.
INSTRUMENT/DRIVER INFORMATION 9E – 29
DAEWOO V–121 BL4
INSTRUMENT CLUSTER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the screws and the instrument cluster.
3. Disconnect the electrical connectors.
Installation Procedure
1. Connect the electrical connectors.
2. Install the instrument cluster with the screws.
Tighten
Tighten the instrument cluster screws to 4 N
S
m (35
lb–in).
3. Connect the negative battery cable.
SPEEDOMETER/ODOMETER/TRIP
ODOMETER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument cluster. Refer to ”Instru-
ment Cluster” in this section.
3. Push the locking and remove the instrument cluster
lens.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст