Daewoo Tacuma: Body Repair Manual — part 30
SEALING, CAULKING AND DEADNER 9–11
Fig. 10
1-2. CAULKING
ENGINE ROOM
9–12 SEALING, CAULKING AND DEADNER
UNDER BODY
Fig. 11
SEALING, CAULKING AND DEADNER 9–13
BACK PANEL
Fig. 12
9–14 SEALING, CAULKING AND DEADNER
Fig. 13
6. Install the related parts.
•
Install in the reverse order in which they were re-
moved.
Fig. 14
2. DEADNER
2-1. GENERAL DESCRIPTION
Deadner is properly designed and applied for reduce the
vibration and noise. Also, it plays in maintaining the struc-
tural rigidity of the panel.
2-2. REPAIR PROCEDURE
1. Remove the related parts.
•
Seats, carpet.
•
Trims, others.
2. Removal of the damaged deadner.
•
Peel off the damaged deadner with a steel spatula,
carefully.
3. Clean and dry.
•
Before applying the deadner, thoroughly clean and
dry the areas to be applied.
4. Prelocation the new deadner.
•
Prelocation the new deadner on the panels to be
applied.
NOTE: Avoid the parts mounting holes and service
holes.
5. Adhension of deadner.
•
Heat the surface of deadner with a torch or heat-
ing gun until it adheres itself.
•
Push and adhere to the panel with a rubber
spatula.
NOTE: In order to take full advantage of the deadner,
its face must adhere and contact the panels perfectly.
CAUTION: Be careful not to burn the composite parts
when beating.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст