Daewoo Korando. Manual — part 195
1G2-2 M161 ENGINE INTAKE & EXHAUST
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
AIR CLEANER
1 Air Cleaner Assembly
2 Element Assembly
3 Insulator
4 Air Duct Hose
6 Bolt (M8 × 30 ) . . . . . . . . ... 22.5-27.5 Nm
M161 ENGINE INTAKE & EXHAUST 1G2-3
Removal & Installation Procedure
1. Release the clamp securing HFM sensor and air cleaner.
2. Disengage the air cleaner assembly and HFM sensor
assembly.
3. Unserew the mounting bolt(6) from the bracket.
Installation Notice
Tightening Torque
22.5 - 27.5 Nm
4. Release the clamp from air cleaner assembly housing and
remove the cover.
5. Remove the air cleaner assembly.
6. Remove the air cleaner housing from insulator.
Notice
Make sure the air cleaner to be seated in insulator.
7. Disengage the air duct hose and air cleaner housing and
remove the housing.
8. Remove the air duct hose.
9. Unscrew the two bolts(7) from air inlet duct.
Installation Notice
10. Remove the air inlet duct.
11. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
8 - 9 Nm
1G2-4 M161 ENGINE INTAKE & EXHAUST
AIR INTAKE SHIELD
Preceding Work : Removal of air cleaner
Removal & Installation Procedure
1. Remove the upper cover (3) from the air intake shield (5)
upper mounting pin.
2. Remove the bolts (4 and 6).
3. Remove the air intake shield (5).
4. Installation should follow the removal procedure in the
reverse order.
1 Air Cleaner Assembly
3 Insulator
4 Air Duct Hose
5 Air Inlet Duct
7
Bolt (M6 × 35 ) . . . . . . . . . . ... 9-11 Nm
M161 ENGINE INTAKE & EXHAUST 1G2-5
INTAKE AIR DUCT
1 Clamp
2 Sleeve
3 HFM Sensor
4 Intake Air Duct
5 Blow-by Hose
7 Clamp(2 pieces)
8 Intake Air Duct Mounting
Bracket
Removal & Installation Procedure
1. Release the clamp (1) and intake air duct.
2. Remove the Blow-by hose (5) (arrow).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст