Daewoo Musso. Manual — part 89
OM600 ENGINE MECHANICAL 1B3-63
TIMING CASE COVER
Preceding Work : Removal of the cooling fan
Rmoval of the V-belt tensioning device
Removal of the vibration damper and hub
Removal of the alternator
1 Bolt . . . . . . . . . . . . . . . 10Nm
2 Cylinder Head Cover
3 Gasket . . . . . . . . . . . . ... Replace
4 Socket Bolt . . . . . . . . . . . . 25Nm
5 Fuel Filter
6 Square Nut
7 Oil Pan
8 Socket Bolt . . . . . . . . . . . . 10Nm
9 Bolt . . . . . . . . . . . . . M6 : 10Nm
M8 : 23Nm
10 Power Steering Pump
11 Bolt
12 Belt Pulley
13 Bolt . . . . . . . . . . . . . . . 32Nm
14 Timing Case Cover
15 Bolt . . . . . . . . . . . . . . . 23Nm
16 Alternator Bracket
17 Bolt . . . . . . . . . . . . . . . 45Nm
18 Bolt . . . . . . . . . . . . . . . 25Nm
19 Bolt . . . . . . . . . . . . . . . 10Nm
20 Closing Cover
21 Socket Bolt . . . . . . . . . . . . 23Nm
22 Guide Pulley
23 Bolt . . . . . . . . . . . . . . . .. 9Nm
24 Guide Pulley Bracket
25 Nut . . . . . . . . . . . . . . . . 23Nm
1B3-64 OM600 ENGINE MECHANICAL
8. Remove the guide pulley bracket (24).
Tools Required
116 589 03 07 00 Socket Wrench
Removal Procedure
1. Remove the fan clutch and cooling fan belt pulley.
2. Drain the engine oil completely.
3. Remove the oil dipstick tube bracket bolts.
4. Remove the crankshaft pulley.
5. Loosen the bolt (1) and then remove the cylinder head cover
(2) and gasket.
6. Remove the vacuum pump.
7. Detach the closing cover (20). Remove the bolts(21) and
then remove the guide pulley (22).
OM600 ENGINE MECHANICAL 1B3-65
11. Remove the alternator bracket (16).
9. Disconnect the pipes of power steering pump and remove
the belt pulley.
Notice
Be careful not to lose the key.
10. Remove the nut and pull out the bolt and then remove the
power steering pump.
12. Remove the fuel filter.
1B3-66 OM600 ENGINE MECHANICAL
18. Remove the timing case cover (19) bolts and then remove
the timing case cover (14).
Notice
Be careful not to damage the cylinder head gasket or oil
pan gasket.
13. Remove the camshaft.
14. Remove the socket bolts(4) in the chain box.
Socket Wrench 115 589 03 07 00
15. Remove the injection pump.
Notice
See the ‘Removal of fuel injection pump’.
16. Remove the oil pan bolts (8, 9) in the area of the timing
case cover (14).
17. Slightly loosen the remaining oil pan bolts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст