Daewoo Musso. Manual — part 293
TRANSFER CASE (PART TIME 4408) 5D1-11
TRANSFER CASE
1 Rear Companion Flange
2 Cover
3 Front Companion Flange
4 Breather Plug
5 Case
6 Input Shaft
7 Mounting Bolt . . . . . . . . . . 38-52 Nm
8 Transmission Adapter
9 Bolt . . . . . . . . . . . . . . 81-59 Nm
10 Washer
11 Front Propeller Shaft
12 Bolt . . . . . . . . . . . . . . 81-89 Nm
13 Washer
14 Rear Propeller Shaft
5D1-12 TRANSFER CASE (PART TIME 4408)
Removal & Installation Procedure
1. Disconnect the negative terminal from the battery.
2. Lift up the vehicle and fix it safely.
3. Remove the drain plug and drain the oil.
Reinstall the drain plug.
* If planar damper is installed, unscrew 4 bolts and remove
the planar damper.
Installation Notice
Tightening Torque
19 - 30 Nm
4. Remove the breather hose.
5. Disconnect the speedometer cable connector and other
cable connectors and wiring harnesses.
6. Support the transfer case with jack and remove the front
and rear propeller shafts from the transfer case.
Installation Notice
Front
Rear
81 - 89 Nm
70 - 80 Nm
Tightening Torque
TRANSFER CASE (PART TIME 4408) 5D1-13
7. Remove the center mounting nuts and end sides mounting
bolts of the cross member and then remove the cross
member.
Installation Notice
Tightening Torque(1)
Tightening Torque(2)
21 - 35 Nm
62 - 93 Nm
8. Remove the transfer case by removing the bolts attaching
the transfer case to the transmission.
Installation Notice
Notice
Apply long-term grease to the inner spline of the transfer
case input shaft.
9. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
38 - 51 Nm
5D1-14 TRANSFER CASE (PART TIME 4408)
UNIT REPAIR
TRANSFER CASE
Preceding Work : Removal of the transfer case
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст