Daewoo Musso. Manual — part 51
1B2-24 M161 ENGINE MECHANICAL
5. Disconnect the vent hose from the A/C bracket.
6. Unscrew all the mounting bolts (arrows) and remove the
A/C bracket and the gasket.
Installation Notice
7. Clean the sealing surface.
8. Replace the gasket with new one.
9. Installation should follow the removal procedure in the
reverse order.
10. Check the oil leakage by operating the engine after
installation.
Tightening Torque
22.5 - 27.5 Nm
M161 ENGINE MECHANICAL 1B2-25
HYDRAULIC ENGINE MOUNTING INSULATOR
Service Data
1B2-26 M161 ENGINE MECHANICAL
Sectional View
1 Rubber Body
2 Brackek
3 Core
4 Lower Bolt
5 Rubber Plunger
6 Plunger Plate
7 Rubber
8 Plate
9 Lower Orifice
10 Upper Orifice
11 Diaphram
12 Cover Plate
13 Upper Bolt
14 Flange Bolt
15 Rivet
16 Fluid
M161 ENGINE MECHANICAL 1B2-27
1 Upper Nut
2 Hydraulic Installer . . . . . 62~93 Nm
3 Lower Nut . . . . . . . . 28~47 Nm
Removal and Installation Procedure
1. Unscrew the upper nut(1) on engine mounting and remove
the engine.
Installation Notice
3. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
62 - 93 Nm
2. Unscrew the lower nut(3) and remove the hydraulic engine
mounting insulator.
Installation Notice
Tightening Torque
28 - 47 Nm
Notice
If the insulator is spotted with oil, replace the hydraulic
insulator assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст