Daewoo Musso. Manual — part 109
OM600 ENGINE MECHANICAL 1B3-143
5. Tighten the camshaft bearing cap bolts acccording to
installation order.
6. Install the camshaft sprocket to be aligned the markings of
the camshaft / camshaft bearing cap (arrow).
Notice
Align the alignment marks on the timing chain and sprocket.
Tightening Torque
25 Nm
Notice
Tighten the No. 1 bolts (light arrow) by one revolution in
stages first and then tighten the No.2 bolts (dark arrow).
OM 661LA
OM 662LA
7. Tighten the camshaft sprocket bolt.
Tightening Torque
25Nm + 90°
1B3-144 OM600 ENGINE MECHANICAL
10. Check the TDC marking of OT on the crankshaft.
8. Install the chain tensioner.
Tightening Torque
80 Nm
Notice
Replace the seal.
Before installation, by pumping in the oil approx. 10 times,
fill the oil.
9. Remove the engine lock.
Notice
If max. length ‘L’ of the 12-sided bolt exceeds 53.6mm,
replace it.
OM600 ENGINE MECHANICAL 1B3-145
CHAIN TENSIONER
1 Chain Tensioner . . . . . . . . . . 80Nm
2 Seal . . . . . . . . . . . . . ... Replace
1B3-146 OM600 ENGINE MECHANICAL
Notice
Always install the chain tensioner to be filled with oil.
Place the chain tensioner in engine oil up to over the collar on the hexagon head with the thrust pin facing up.
Slowly push down the thrust pin as far as the stop 7~10 times with the aid of a press or a column drill
Faulty chain tensioners should be replaced completely.
3 Screw Plug
4 Aluminum Gasket
5 Ball
6 Ball Guide
7 Compression Spring
8 Compression Spring
9 Housing
10 Thrust Pin
11 Valve Disc
12 O-Ring
13 Snap Ring
14 Compression Spring
15 Filler
A Feed Bore from Cylinder Head
B To Oil Pan
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст