Daewoo Musso. Manual — part 350
![](/vehicles/epme/qux/oho/ube.png)
FRAME AND UNDERBODY 9N-5
1 Mounting Bolt . . . . . . . . . ... 28-47 Nm
SKID PLATE
.
2 Skid Plate
Removal & Installation Procedure
1. Remove 6 mounting bolts and carefully remove the skid
plate.
Installation Notice
2. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
28 - 47 Nm
SECTION 9O
BUMPERS AND FASCIAS
TABLE OF CONTENTS
Maintenance and Repair . . . . . . . . . . . . . . . 9O-2
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . 9O-2
Front Bumper . . . . . . . . . . . . . . . . . . . . . . . . . 9O-2
Rear Bumper . . . . . . . . . . . . . . . . . . . . . . . . . 9O-4
![](/vehicles/epme/qux/oho/vealu.png)
9O-2 BUMPERS AND FASCIAS
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT BUMPER
Notice
Removal and installation is as shown in upper drawings.
![](/vehicles/epme/qux/oho/swisoreng.png)
BUMPERS AND FASCIAS 9O-3
Mounting Inspection
1. Clearance between the upper bumper and radiator grille.
2. Clearance between the upper bumper and headlamp
moding.
Clearance
12 ± 1.0 mm
Clearance
9 mm
2. Clearance between the bumper and wheel arch.
Clearance
10 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст