Daewoo Musso. Manual — part 322
MANUAL & SEMIAUTO-HVAC 7B/C-23
Gasoline Engine
1 Low Pressure Pipe
2 High Pressure Pipe
3 Compressor Bracket
4 Compressor
Removal & Installation Procedure
1. Disconnect the negative(-) terminal from the battery.
2. Discharge refrigerant from the system.
Notice
By connecting a manifold gauge connection hose to High/
Low pressure line, discharge the refrigerant.
3. Disconnect the high / low pressure pipe and wire connectors.
7B/C-24 MANUAL & SEMIAUTO-HVAC
4. Remove the mounting bolt from the compressor bracket
and remove compressor assembly.
Notice
Place the removed compressor in vertical position.
5. Installation should follow the removal procedure in the
reverse order.
MANUAL & SEMIAUTO-HVAC 7B/C-25
HEATER AND AIR CONDITIONER CONTROL BOX
1 Blower Switch
2 Recirculation Switch
3 Mode Switch
4 A/C Switch
5 Temperature Control Lever
6 In-vehicle Sensor
MANUAL
SATC
7B/C-26 MANUAL & SEMIAUTO-HVAC
Removal & Installation Procedure
1. Remove the switch panel.
Notice
Be careful not to damage the switch panel.
2. Remove the fixing screws (4 screws) of the control box.
3. Disconnect the wire connectors and remove the control box.
4. Installation should follow the removal procedure in the
reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст