Daewoo Musso. Manual — part 123
1D1-12 M162 ENGINE COOLING
COOLING FAN AND VISCOUS CLUTCH
Preceding Work : Removal of cooling fan shroud
1 Cooling Fan Pulley
2 Viscous Clutch
3 Cooling Fan
4 Bolt (M6 X 12, 4 pieces) . . . . . . . 9-11 Nm
5 Bolt (M10 X 45, 1 piece) . . . . . 40.5-49.5 Nm
M162 ENGINE COOLING 1D1-13
Tools Required
603 589 00 40 00 Counter Holder
Removal & Installation Procedure
1. Hold the cooling fan pulley using the counter holder (special
tool : 603 589 00 40 00) and remove the cooling fan after
unscrewing the four bolts (4).
Installation Notice
2. Remove the bolt (5) from the viscous clutch and remove
the viscous clutch from the cooling fan pulley.
Installation Notice
Tightening Torque
9 - 11 Nm
Tightening Torque
40.5 - 49.5 Nm
3. Installation should follow the removal procedure in the
reverse order.
1D1-14 M162 ENGINE COOLING
COOLING FAN SHROUD
Removal & Installation Procedure
1. Pull out the 2 clips (1) from the fan shroud assembly.
2. Remove the lower fan shroud (2).
Notice
For installation, exactly align the lower fan shroud pin into
the hole of the fan shroud assembly (4) and insert the
clips.
3. Remove the bolts (3) and then remove the cooling fan
shroud assembly (4).
1 Clip
2 Lower Fan Shroud
3 Bolt
Installation Notice
4. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
7 Nm
4 Fan Shroud Assembly
5 Radiator
M162 ENGINE COOLING 1D1-15
RADIATOR
Preceding Work : Removal of cooling fan shroud
1 Radiator Inlet Coolant Hose
2 Radiator Outlet Coolant Hose
3 Make Up Coolant Hose
4 Automatic Transmission Oil Cooling Hose
5 Automatic Transmission Oil Cooling Line
6 Bolt
7 Insulator
8 Stopper
9 Bolt . . . . . . . . . . . . . . . . 7 Nm
10 Radiator
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст