Daewoo Matiz (2003 year). Manual — part 116
REAR SUSPENSION 2D – 5
CHECKING THE REAR WHEEL
BEARING END PLAY
1. Release the parking brake.
2. Raise the vehicle.
3. Check the wheel bearing play by moving the top and
the down of the tire in an in–and–out motion.
D106C301
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
Rear Wheel Bearing Play
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
0 mm (0 in.)
4. If the bearing play is high, tighten the castellated nut.
5. If the bearing play is high after tightening, replace the
wheel bearing.
REAR WHEEL BEARING FREE LOAD
1. Release the parking brake.
2. Raise the vehicle and rotate the wheel.
3. Remove the wheels.
4. Check the torque when the hub moves by a spring
scale.
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
Standard (No Load)
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁ
0.137 – 0.422 N
S
m
(0.9 – 3.7 lb-in)
D106C302
5. If the checked torque exceeds the specification, tight-
en the castellated nut.
6. If the checked torque exceeds the specification after
tightening, replace the wheel bearing.
2D – 6 REAR SUSPENSION
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
D106C501
SHOCK ABSORBER
Removal Procedure
1. Support the rear axle with adjustable jack stands.
D
Raise the vehicle and support the rear axle assem-
bly (1, 2).
D106C502
2. Remove the shock absorber.
D
Remove the bolt (1).
D
Remove the nut (2).
D16C503B
Installation Procedure
1. Install the shock absorber.
D
Install the shock absorber–to–rear axle bolt (1).
Tighten
Tighten the bolt to 45–70 N
S
m (33–52 lb-ft).
D
Install the shock absorber–to–body bracket nut (2).
Tighten
Tighten the shock absorber nut to 45–70 N
S
m (33–52
lb-ft).
2. Remove the jack stand and lower the vehicle.
REAR SUSPENSION 2D – 7
D106C504
LATERAL ROD
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the lateral rod.
D
Remove the lateral rod–to– body bracket bolt (1).
D106C505
D
Remove the lateral rod–to–rear axle nut (2).
D106C506
2. Remove the lateral rod axle side bushing and washer
from the lateral rod.
D16C507A
Installation Procedure
1. Install in the reverse order of removal.
2. Install the lateral rod–to–rear axle side nut.
Tighten
Tighten the lateral rod axle side nut to 35–55 N
S
m
(25–41 lb-ft).
2D – 8 REAR SUSPENSION
D16C508B
3. Install the lateral rod–to–body bracket bolt.
Tighten
Tighten the lateral rod–to–body bracket bolt to 50–70
N
S
m (37–52 lb-ft).
D106C509
TRAILING ARM
Removal Procedure
1. Raise and suitably support the vehicle.
2. Support the rear axle with adjustable jack stands.
3. Separate the rear shock absorber from the rear axle
assembly.
D
Loosen the shock absorber–to–body bracket nut
(1).
D
Remove the shock absorber–to–rear axle bolt (2).
D106C510
4. Remove the trailing arm.
D
Remove the trailing arm–to–rear axle bolts (1).
D106C511
D
Remove the trailing arm–to–body bracket bolt (2).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст