Daewoo Matiz (2003 year). Manual — part 240
9D – 10 WIPERS/WASHER SYSTEMS
D19D533A
1.5–2.0 N
S
m
Installation Procedure
1. Install the wiper linkage with the wiper linkage nuts.
Tighten
Tighten the wiper linkage nuts to 1.5–2.0 N
S
m (13–18
lb-in).
a. Wiper linkage nut.
2. Install the wiper motor linkage ball.
3. Install the cowl vent grille. Refer to Section 9R, Body
Front End.
4. Install the windshield wiper arms. Refer to ”Wind-
shield Wiper Arm” in this section.
D109D534
WINDSHIELD WIPER BLADE
Removal Procedure
1. Pull the wiper blade off the arm by pushing the wiper
blade retaining clip (1).
D109D535
Installation Procedure
1. Install the wiper blade to the arm.
D109D536
WASHER RESERVOIR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the washer reservoir inlet.
D
Remove the bolt (1).
D
Remove the washer reservoir inlet (2).
WIPERS/WASHER SYSTEMS 9D – 11
D19D537A
3. Raise and suitably support the vehicle.
4. Remove the front RH wheelhouse splash shield.
D
Remove the screws (1).
D
Remove the clips (2).
D
Remove the wheelhouse splash shield (3).
D109D538
5. Remove the washer reservoir assembly.
D
Drain the washer fluid.
D
Disconnect the washer hose connector (1).
D
Disconnect the washer pump electrical connector
(2).
D
Remove the bolts (3).
D
Remove the washer reservoir assembly (4).
D109D539
Installation Procedure
1. Install the washer reservoir assembly with the bolts.
2. Connect the washer pump electrical connector.
3. Connect the washer hose connector.
4. Install the front RH wheelhouse splash shield with the
screws and the clips.
5. Lower the vehicle.
6. Install the washer reservoir with the bolt.
7. Connect the negative battery cable.
D109D540
WASHER PUMP
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the washer reservoir assembly. Refer to
“Washer Reservoir” in this section.
3. Drain the washer fluid.
4. Remove the wiper motor from the washer reservoir
assembly.
a. Washer pump.
9D – 12 WIPERS/WASHER SYSTEMS
D109D539
Installation Procedure
1. Install the wiper motor to the washer reservoir assem-
bly.
2. Install the washer reservoir assembly.
Refer to “Washer Reservoir” in this section.
3. Connect the negative battery cable.
4. Fill the washer reservoir.
D109D541
WINDSHIELD WASHER NOZZLE
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
2. Remove the washer nozzle from the cowl vent grille.
D
Disconnect the washer nozzle hose (1).
D
Remove the washer nozzle (2).
D109D542
Installation Procedure
1. Install the washer nozzle to the cowl vent grille.
2. Install the washer nozzle hose to the washer nozzle.
3. Install the cowl vent grille.
Refer to Sec-
tion 9R, Body Front End.
D109D543
REAR WINDOW WASHER NOZZLE
Removal Procedure
1. Remove the washer nozzle from the wiper arm.
D
Disconnect the washer nozzle hose (1).
D
Remove the washer nozzle (2).
WIPERS/WASHER SYSTEMS 9D – 13
D109D535
Installation Procedure
1. Install the washer nozzle to the wiper arm assembly.
D
Install the washer nozzle hose in the wiper arm re-
turn spring.
D
Fix the washer nozzle into the wiper arm.
D
Install the washer nozzle hose to the pivot cap con-
nector.
D109C522
WASHER HOSE
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
a. Cowl vent grille.
2. Disconnect the washer hose connector.
b. Washer hose connector.
D19D537A
3. Raise and suitably support the vehicle.
4. Remove the front RH wheel.
5. Remove the front RH wheel house splash shield.
D
Remove the screws (1).
D
Remove the clips (2).
D
Remove the wheel house splash shield (3).
D109D544
6. Disconnect the washer hose from the washer pump.
a. Washer hose.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст