Daewoo Matiz (2003 year). Manual — part 256

9H – 2 SEATS

DESCRIPTION AND OPERATION

SEATS

Important: Do not attempt to change the designed seat
position by altering the designed seat adjuster-to-floor
pan anchor provisions or the seat adjuster-to-seat frame
anchor provisions. Changing the seat position could af-
fect the performance of the seat system.

This vehicle is equipped with low-backed front seats
with separate head restraints and a three-passenger

folding rear seat. Split folding rear seat is optional. Seats
cushions and seatbacks have formed foam pads, which
fit the contours of the full–panel seatback frame assem-
bly and the designed contour of the seat cushion frame.
There are no front seat forward or rearward relocation
provisions provided at either the seat adjuster–to–seat
frame or the seat adjuster–to–floor pan anchor attach-
ments.

SEATS 9H – 3

COMPONENT LOCATOR

FRONT SEAT

D109B402

1. Head Restraint
2. Guide Sleeve
3. Seatback
4. Seatback Frame
5. Seat Cushion

6. Seat Cushion Frame
7. Recliner
8. Recliner Knob
9. Seat Side Cover

10. Guide Rail

9H – 4 SEATS

REAR SEAT

D19B403A

1. Rear Seatback Cushion
2. Rear Seatback Frame
3. Rear Seat Hinge
4. Rear Seat Lock
5. Rear Seat Cushion

6. Seat Release Knob
7. Eyelet
8. Seat Back Hinge
9. Rear Cushion Pull Loop

SEATS 9H – 5

REPAIR INSTRUCTIONS

ON–VEHICLE SERVICE

D109B528

FRONT SEATS

Removal Procedure

1. Disconnect the negative battery cable.

2. Remove the front seat.

D

Remove the bolts (1).

D

Disconnect the seat belt warning lamp connector
(2).

D

Remove the seat (3).

23–28 N

S

m

D19B529A

Installation Procedure

1. Connect the seat belt warning lamp connector.

2. Install the front seat with the bolts.

Tighten

Tighten the seat bolt to 23–28 N

S

m (17–21 lb-ft).

a. Seat bolt.

3. Connect the negative battery cable.

D109B530

HEAD RESTRAINT

Removal Procedure

1. Pull the head restraint up to the stop position.

2. Insert a small flathead screwdriver in the notch in the

left guide sleeve and pull up the head restraint by
pushing the head restraint left.