Daewoo Matiz (2003 year). Manual — part 277
9P – 24 DOORS
D109C616
Installation Procedure
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fastener to prevent premature corrosion.
1. With the aid of another technician, install the hinge to
the door and the body with the bolts.
D109C617
DOOR HOLD OPEN LINK
Removal Procedure
1. Remove the door seal trim. Refer to “Door Seal Trim”
in this section.
2. Remove the door hold open link.
D
Remove the hinge–to–body bolt (1).
D
Remove the hinge–to–door bolts (2).
D
Remove the door hold open link (3).
D109C618
Installation Procedure
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fastener to prevent premature corrosion.
1. Install the door hold open link to the door and the
body with the bolts.
2. Remove the door seal trim. Refer to “Door Seal Trim”
in this section.
D109C619
INSIDE CHANNEL WEATHERSTRIP
(STANDARD)
Removal Procedure
1. Remove the channel weatherstrip.
a. Weatherstrip.
DOORS 9P – 25
D109C620
Installation Procedure
1. Install the channel weatherstrip.
D109C621
INSIDE CHANNEL WEATHERSTRIP
(DELUXE)
Removal Procedure
1. Remove the door trim. Refer to Section 9G, Interior
Trim.
2. Remove the channel weatherstrip from the door trim.
D
Straighten the retaining tabs (1).
D
Remove the channel weatherstrip (2).
D109C622
Installation Procedure
1. Install the channel weatherstrip onto the door trim
panel.
2. Bend the retaining tabs to secure the channel weath-
erstrip to the door trim panel.
3. Install the door trim panel. Refer to Section 9G, Interi-
or Trim.
D109C623
DOOR OUTSIDE CHANNEL
WEATHERSTRIP
Removal Procedure
1. Remove the channel weatherstrip.
D
Remove the screw (1).
D
Lift off the outside channel weatherstrip (2).
9P – 26 DOORS
D109C624
Installation Procedure
1. Press the outside channel weatherstrip onto the door.
2. Install the weatherstrip screw.
D109C625
DOOR WEATHERSTRIP
Removal Procedure
1. Remove the door hold open link bolt.
D109C626
2. Remove the door weatherstrip.
D
Remove the clip (1).
D
Remove the weatherstrip pins (2).
D109C627
Installation Procedure
1. Install the door weatherstrip with the clip and the pins.
2. Install the door hold open link bolt.
DOORS 9P – 27
D109C566
DOOR SEAL TRIM
Removal Procedure
1. Remove the door trim panel. Refer to Section 9G, In-
terior Trim.
2. Remove the door seal trim.
a. Door seal trim.
b. Door pocket handle bracket.
Important: In case of the deluxe trim, remove the door
pocket handle bracket in advance.
D109C628
Installation Procedure
1. Install the door seal trim.
2. Install the door pocket handle bracket for the deluxe
trim.
3. Install the door trim panel. Refer to Section 9G, Interi-
or Trim.
D109C629
DOOR OPENING WEATHERSTRIP
Removal Procedure
1. Mark the door opening weatherstrip edge by a soluble
pen.
D109C630
2. Remove the door opening weatherstrip.
D
Take off the rocker trim panel partially (1).
D
Take off the lower B–pillar trim panel partially (2).
D
Remove the door opening weatherstrip (3).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст