Hyundai Elantra GT (2018 year). Instruction — part 6
Convenient features of your vehicle
DOOR LOCKS
Operating Door Locks from
Remote key
Smart key
Outside the Vehicle
Mechanical key
■ Remote key
■ Smart key
Unlock
Unlock
Lock / Unlock
Lock
Lock
OPD046005
OPD047001N
Door
Door
Lock
Unlock
To lock the doors, press the Door
OPD046006
Lock button (1) on the remote key.
Press the Door Unlock button (2) on
If you lock the driver's door with a
the remote key, the driver's door will
mechanical key, all vehicle doors will
unlock. If you press the Door Unlock
lock. If you unlock the driver's door
button on the remote key again with-
with a mechanical key, the driver's
in four seconds, then all the doors
door will unlock and the passenger
will unlock.
doors will unlock according to the
OPD046004
current two press unlock setting.
Once the doors are unlocked, they
may be opened by pulling the door
Press the button on the driver's out-
Once the doors are unlocked, they
may be opened by pulling the door
handle.
side door handle while carrying the
handle.
When closing the door, push the
Smart Key with you or press the Door
door by hand. Make sure that doors
Unlock button on the Smart Key, the
When closing the door, push the
driver's door will unlock. If you press
door by hand. Make sure that doors
are closed securely.
the button on the front passenger's
are closed securely.
outside door, all doors will unlock.
3-12
Once the doors are unlocked, they
i
Information
may be opened by pulling the door
handle.
If the electrical power to door lock
switch is not operating (ex. dead car
When closing the door, push the
battery) and the liftgate is closed you
door by hand. Make sure that doors
will not be able to open the liftgate
are closed securely.
until power is restored.
3
i
Information
Operating door locks from
•
In cold and wet climates, door lock
inside the vehicle
and door mechanisms may not work
properly due to freezing conditions.
With the door handle
OPDE046414
•
If the door is locked/unlocked multi-
In case of an emergency
ple times in rapid succession with
If the electrical power to door lock
either the vehicle key or door lock
switch is not operating (ex. dead car
switch, the system may stop operat-
battery) the only way to lock the
ing temporarily in order to protect
door(s) is with the mechanical key
the circuit and prevent damage to
from the outside key hole.
system components.
Doors without an outside key hole
•
Two press unlock setting can be
can be locked as follows:
changed in the User Settings mode
on the cluster.
1. Open the door.
2. Insert the key into the emergency
door lock hole and turn the key
OPD047456N
horizontally to lock.
Front door
3. Close the door securely.
If the inner door handle is pulled
when the door is locked, the door will
unlock and open.
3-13
Convenient features of your vehicle
Rear door
With the central door lock/
i
Information
If the inner door handle is pulled
unlock switch
The indicator light on the switch
once when the door is locked, the
blinks for approximately one minute
door will unlock.
when a door is unlocked or the liftgate
If the inner door handle is pulled
is opened.
once more, the door will open.
WARNING
i
Information
•
The doors should always be
If a power door lock ever fails to func-
tion while you are in the vehicle try
fully closed and locked while
the vehicle is in motion. If the
one or more of the following tech-
niques to exit:
doors are unlocked, the risk of
being thrown from the vehicle
•
Operate the door unlock feature
OPD046008
in a crash is increased.
repeatedly
(both electronic and
•
With a door unlocked
•
Do not pull the inner door
manual) while simultaneously
pulling on the door handle.
- If you press the central door lock
handle of the driver's or pas-
switch, all vehicle doors will lock
senger's door while the vehi-
•
Operate the other door handles,
and the indicator light on the switch
cle is moving.
front and rear.
will illuminate.
•
Lower a front window and use the
- If any door is opened when the
mechanical key to unlock the door
switch is pressed, none of the
from outside.
doors will lock.
•
With all doors locked
- If you press the central door unlock
switch, all vehicle doors will unlock.
- If any door is unlocked, the central
door lock indicator light will turn off.
3-14
Auto Door Lock/Unlock Features
WARNING
CAUTION
Impact sensing door unlock
Do not leave children or animals
Opening a door when something
All doors will be automatically
unattended in your vehicle. An
is approaching may cause dam-
unlocked when an impact causes the
enclosed vehicle can become
age or injury. Be careful when
air bags to deploy.
extremely hot, causing death or
opening doors and watch for
serious injury to unattended
vehicles, motorcycles, bicycles
Speed sensing door lock
3
children or animals who cannot
or pedestrians approaching the
All doors will be automatically locked
escape the vehicle. Children
vehicle in the path of the door.
(when set on cluster) when vehicle
might operate features of the
speed exceeds 9 mph (15 km/h).
vehicle that could injure them,
or they could encounter other
WARNING
All of the doors will be automatically
harm, possibly from someone
unlocked after the vehicle is turned off.
gaining entry to the vehicle.
If you stay in the vehicle for a
You can activate or deactivate the
long time while the weather is
Auto Door Lock/Unlock features from
very hot or cold, there are risks
the User Settings mode on the LCD
WARNING
of injuries or danger to life. Do
display.
not lock the vehicle from the
Always secure your vehicle.
For more information, refer to the
outside when someone is in the
Leaving your vehicle unlocked
vehicle.
"LCD Display" section in this
chapter.
can allow theft or entry into the
vehicle.
To secure your vehicle, while
depressing the brake, move the
shift lever to the P (Park) posi-
tion, engage the parking brake,
and place the Engine Start/Stop
button in the OFF position, close
all windows, lock all doors, and
always take the key with you.
3-15
Convenient features of your vehicle
THEFT-ALARM SYSTEM
Child-Protector Rear Door Locks
To allow a rear door to be opened
This system helps to protect your vehi-
from inside the vehicle, unlock the
cle and valuables. The horn will sound
child safety lock.
and the hazard warning lights will blink
continuously if any of the following
occur:
WARNING
- A door is opened without using the
remote key or smart key.
If children accidently open the
rear doors while the vehicle is
- The liftgate is opened without using
in motion, they could fall out of
the remote key or smart key.
the vehicle. The rear door safety
- The engine hood is opened.
locks should always be used
The alarm continues for 30 seconds,
whenever children are in the
then the system resets. To turn off the
vehicle.
OPDE046009
alarm, unlock the doors with the
remote key or smart key.
The child safety lock is provided to
The Theft Alarm System automatically
help prevent children seated in the
sets 30 seconds after you lock the
rear from accidentally opening the
doors and the liftgate. For the system
rear doors. The rear door safety locks
to activate, you must lock the doors
should be used whenever children
and the liftgate from outside the vehi-
are in the vehicle.
cle with the remote key or smart key or
The child safety lock is located on
by pressing the button on the outside
the edge of each rear door. When the
of the door handle with the smart key
child safety lock is in the lock posi-
in your possession.
tion, the rear door will not open if the
The hazard warning lights will blink
inner door handle is pulled.
and the chime will sound once to indi-
To lock the child safety lock, insert a
cate the system is armed.
key (or screw driver) (1) into the hole
Once the security system is set, open-
and turn it to the lock position.
ing any door, the liftgate, or the hood
without using the remote key or smart
key will cause the alarm to activate.
3-16
STEERING WHEEL
The Theft Alarm System will not set if
Electric Power Steering (EPS)
i
Information
the hood, the liftgate, or any door is
The system assists you with steering
The following symptoms may occur dur-
not fully closed. If the system will not
the vehicle. If the vehicle is turned off
ing normal vehicle operation:
set, check the hood, the liftgate, or the
or if the power steering system
doors are fully closed.
•
The steering effort may be high imme-
becomes inoperative, you may still
diately after placing the ignition switch
Do not attempt to alter this system or
steer the vehicle, but it will require
in the ON position.
add other devices to it.
increased steering effort.
This happens as the system performs
3
Should you notice any change in the
the EPS system diagnostics. When the
i
Information
effort required to steer during normal
diagnostics are completed, the steering
vehicle operation, have the system
•
Do not lock the doors until all pas-
wheel will return to its normal condi-
checked by an authorized HYUNDAI
sengers have left the vehicle. If the
tion.
dealer.
remaining passenger leaves the
•
A click noise may be heard from the
vehicle when the system is armed,
EPS relay after the ignition switch is in
the alarm will be activated.
CAUTION
the ON or LOCK/OFF position.
•
If the vehicle is not disarmed with
•
Motor noise may be heard when the
the remote key or smart key, open
If the Electric Power Steering
vehicle is at a stop or at a low driving
the doors by using the mechanical
System does not operate nor-
speed.
key and place the ignition switch in
mally, the warning light (
) will
•
When you operate the steering wheel
the ON position (for remote key) or
illuminate on the instrument
in low temperatures, abnormal noise
start the engine (for smart key) by
cluster. You may steer the vehi-
may occur. If the temperature rises,
directly pressing the ignition switch
cle, but it will require increased
the noise will disappear. This is a nor-
with the smart key.
steering efforts. Take your vehi-
mal condition.
cle to an authorized HYUNDAI
•
If the system is disarmed by unlock-
dealer and have the system
•
When an error is detected from the
ing the vehicle, but neither a door or
checked as soon as possible.
EPS, the steering effort assist function
the liftgate is opened within 30 sec-
will not be activated in order to pre-
onds, the doors will relock and the
vent fatal accidents. Instrument clus-
system will rearm automatically.
ter warning lights may be on or the
steering effort may be high. When the
following symptoms occur, immediate-
ly drive the vehicle to a safe area and
check it.
3-17
Convenient features of your vehicle
Tilt Steering / Telescope Steering
Horn
Adjust the steering wheel so it points
toward your chest, not toward your
face. Make sure you can see the
instrument cluster warning lights and
gauges. After adjusting, push the
steering wheel both up and down to
be certain it is locked in position.
Always adjust the position of the
steering wheel before driving.
OPD046012
WARNING
To change the steering wheel angle
OPD046014
NEVER adjust the steering
and height:
wheel while driving. This may
To sound the horn, press the area
1. Pull down the lock-release lever (1).
cause loss of vehicle control
indicated by the horn symbol on your
2. Adjust the steering wheel to the
resulting in an accident.
steering wheel (see illustration). The
desired angle (2) and distance for-
horn will operate only when this area
ward/back (3).
is pressed.
3. Pull up the lock-release lever to
lock the steering wheel in place.
NOTICE
Do not strike the horn severely to
i
Information
operate it, or hit it with your fist.
After adjustment, sometimes the lock
Do not press on the horn with a
release lever may not lock the steering
sharp-pointed object.
wheel. It is not a malfunction. This
occurs when two gears are not
engaged correctly. In this case, adjust
the steering wheel again and then lock
the steering wheel.
3-18
MIRRORS
Heated Steering Wheel
NOTICE
Inside Rearview Mirror
(for Canada, if equipped)
Before you start driving, adjust the
Do not install any cover or acces-
rearview mirror to the center on the
sory on the steering wheel. The
view through the rear window.
cover or accessory could cause
damage to the heated steering
wheel system.
WARNING
3
Make sure your line of sight is
not obstructed. Do not place
objects in the rear seat, cargo
area, or behind the rear head-
rests which could interfere with
your vision through the rear
OPD046013
window.
When the ignition switch is in the ON
position or when the engine is running,
press the heated steering wheel button
WARNING
to warm the steering wheel. The indi-
cator on the button will illuminate.
To prevent serious injury during
an accident or deployment of
To turn the heated steering wheel off,
the air bag, do not modify the
press the button again. The indicator
rearview mirror and do not
on the button will turn off.
install a wide mirror.
The heated steering wheel will auto-
matically turn off after approximately
30 minutes.
3-19
Convenient features of your vehicle
Day/night rearview mirror
Blue Link® center (if equipped)
WARNING
(if equipped)
NEVER adjust the mirror while
driving. This may cause loss of
vehicle control resulting in an
accident.
Night
NOTICE
When cleaning the mirror, use a
paper towel or similar material
dampened with glass cleaner. Do
not spray glass cleaner directly on
OAD045011N
Day
the mirror as that may cause the
OAE046010
For details, refer to the Blue Link®
liquid cleaner to enter the mirror
Make this adjustment before you
Owner's Guide, Navigation Manual
housing.
start driving and while the day/night
or Audio Manual.
lever is in the day position.
Pull the day/night lever towards you
Electric chromic mirror (ECM)
to reduce glare from the headlights
with HomeLink® system,
of the vehicles behind you during
compass and Blue Link®
night driving.
(if equipped)
Remember that you lose some
Your vehicle may be equipped with a
rearview clarity in the night position.
Gentex Automatic-Dimming Mirror
with a Z-Nav™ Electronic Compass
Display and an Integrated HomeLink®
Wireless Control System.
3-20
During nighttime driving, this feature
(7) Channel 2 button
Your mirror will automatically dim
will automatically detect and reduce
upon detecting glare from the vehi-
(8) Channel 3 button
rearview mirror glare while the com-
cles traveling behind you. The auto-
(9) Compass display
pass indicates the direction the vehi-
dimming function can be controlled
cle is pointed. The HomeLink®
(10) Rear light sensor
by pressing the Dimming ON/OFF
Universal Transceiver allows you to
button (4):
activate your garage door(s), electric
Automatic-Dimming Night Vision
gate, home lighting, etc.
Safety™ (NVS®) Mirror
1. Pressing and holding the button
3
(if equipped)
for 3 seconds turns the auto-dim-
ming function OFF which is indi-
The NVS® Mirror automatically
cated by the green Status
reduces glare by monitoring light lev-
Indicator LED turning off.
els in the front and the rear of the
vehicle. Any object that obstructs
2. Pressing and holding the button
either light sensor will degrade the
for 3 seconds again turns the auto-
automatic dimming control feature.
dimming function ON which is indi-
cated by the green Status Indicator
For more information regarding
LED turning on.
NVS® mirrors and other applica-
The mirror defaults to the ON posi-
tions, please refer to the Gentex
tion each time the vehicle is started.
website:
OAD045045N
Z-Nav™ Compass Display
(1) Blue Link Center button
The NVS™ Mirror in your vehicle is
(2) Blue Link POI button
also equipped with a Z-Nav™
Compass that shows the vehicle
(3) Blue Link SOS button
Compass heading in the Display
(4) Compass control button &
Window using the 8 basic cardinal
Dimming ON/OFF button
headings (N, NE, E, SE, etc.).
(5) Status indicator LED
(6) Channel 1 button
3-21
Convenient features of your vehicle
Compass function
The Compass can be turned ON and
OFF and will remember the last state
when the ignition is cycled. To turn
the display feature ON/OFF:
1. Press and release the
button
within 1 second to turn the display
feature OFF.
2. Press and release the
button
again within 1 second to turn the
display back ON.
Additional options can be set with
press and hold sequences of the
button and are detailed below.
There is a difference between mag-
netic north and true north. To com-
pensate for this difference you will
need to adjust the Zone setting based
on where you live.
B520C05NF
3-22
To adjust the Zone setting:
If you need to recalibrate the com-
Integrated HomeLink® Wireless
pass:
Control System
1. Determine the desired Zone
Number based upon your current
1. Press and hold the
button for
The HomeLink® Wireless Control
location on the Zone Map.
more than 9 seconds. When the
System can replace up to three
compass memory is cleared a "C"
hand-held radio-frequency
(RF)
2. Press and hold the button for 6
will appear in the display.
transmitters with a single built-in
seconds, the current Zone
Number will appear on the display.
2. Drive the vehicle in 2 complete cir-
device. This innovative feature will
learn the radio frequency codes of
3
3. Pressing and holding the button
cles at less than 5 mph (8 km/h).
most current transmitters to operate
again will cause the numbers to
devices such as gate operators,
increment (Note: they will repeat
garage door openers, entry door
…13, 14, 15, 1, 2, …). Releasing
locks, security systems, even home
the button when the desired Zone
lighting. Both standard and rolling
Number appears on the display
code-equipped transmitters can be
will set the new Zone.
programmed by following the out-
4. Within about 5 seconds the com-
lined procedures.
pass will start displaying a com-
Additional HomeLink® information
pass heading again.
can be found at: www.homelink.com
or by calling 1-800-355-3515.
There are some conditions that can
Retain the original transmitter of the
cause changes to the vehicle mag-
RF device you are programming for
nets, such as installing a ski rack or
use in other vehicles as well as for
a CB antenna. Body repair work on
future HomeLink® programming. It is
the vehicle can also cause changes
also suggested that upon the sale of
to the vehicle’s magnetic field. In
the vehicle, the programmed
these situations, the compass will
HomeLink® buttons be erased for
need to be re-calibrated to quickly
security purposes.
correct these changes.
3-23
Convenient features of your vehicle
Programming HomeLink®
Programming
WARNING
Please note the following:
Flashing
Before programming HomeLink®
•
When programming a garage door
to a garage door opener or gate
opener, it is advised to park the
operator, make sure people and
vehicle outside of the garage.
objects are out of the way of the
•
It is recommended that a new bat-
device to prevent potential harm
tery be placed in the hand-held
or damage. Do not use the
transmitter of the device being pro-
HomeLink® with any garage door
grammed to HomeLink® for quicker
opener that lacks the safety stop
training and accurate transmission
and reverse features required by
of the radio-frequency signal.
U.S. federal safety standards (this
•
Some vehicles may require the igni-
includes any garage door opener
ODH044413N
tion switch to be placed in the ACC
model manufactured before April
(or "Accessories") position for pro-
To train most devices, follow these
1, 1982). A garage door that can-
gramming and/or operation of
instructions:
not detect an object - signaling
HomeLink®.
the door to stop and reverse -
1. For first-time programming, press
•
In the event that there are still pro-
does not meet current U.S. feder-
and hold the two outside buttons
gramming difficulties or questions
(
), HomeLink® Channel
1
al safety standards. Using a
,
garage door opener without
after following the programming
and Channel 3, until the indicator
steps listed below, contact
light begins to flash (after 10 sec-
these features increases the risk
of serious injury or death.
HomeLink®homelwww.homelink.com
onds). Release both buttons. Do
or by calling 1-800-355-3515.
not hold the buttons for longer
than 20 seconds.
3-24
4. Press and hold for 5 seconds then
Flashing
i
Information
release the programmed HomeLink®
Some devices may require you to
button up to two separate times to
replace this Programming step 3 with
activate the door. If the door does not
procedures noted in the "Gate
activate, press and hold the just-
Operator/Canadian Programming"
trained HomeLink® button and
chapter. If the HomeLink® indicator
observe the indicator light.
light does not change to a rapidly
• If the indicator light stays on con-
3
blinking light after performing these
stantly, programming is complete
steps,
contact HomeLink®
at
and your device should activate
when the HomeLink® button is
ODH044414N
pressed and released.
2. Position the end of your hand-held
• If the indicator light blinks rapidly
transmitter
1-3 inches
(2-8 cm)
for 2 seconds and then turns to a
away from the HomeLink® button
constant light, continue with
you wish to program while keeping
"Programming" steps 5-7 to com-
the indicator light in view.
plete the programming of a rolling
code equipped device (most com-
3. Simultaneously press and hold
monly a garage door opener).
both the HomeLink® and hand-
held transmitter buttons until the
5. At the garage door opener receiver
HomeLink® indicator light changes
(motor-head unit) in the garage,
from a slow to a rapid blinking
locate the "learn" or "smart" button.
light. Now you may release both
This can usually be found where
the HomeLink® and hand-held
the hanging antenna wire is
transmitter buttons.
attached to the motor-head unit.
3-25
Convenient features of your vehicle
6. Firmly press and release the
Gate operator & Canadian program-
Reprogramming a single HomeLink®
"learn" or "smart" button.
(The
ming
button
name and color of the button vary
During programming, your handheld
To program a device to HomeLink®
by manufacturer). There are
30
transmitter may automatically stop
using a HomeLink® button previously
seconds to initiate step 7.
transmitting. Continue to press the
trained, follow these steps:
7. Return to the vehicle and firmly
Integrated HomeLink® Wireless
1. Press and hold the desired
press, hold for
2 seconds and
Control System button (note steps 2
HomeLink® button. DO NOT
release
the
programmed
through 3 in the Programming portion
release the button.
HomeLink® button. Repeat the
of this document) while you press
2. The indicator light will begin to flash
"press/hold/release" sequence a
and re-press ("cycle") your handheld
after 20 seconds. Without releasing
second time, and, depending on
transmitter every two seconds until
the HomeLink® button, proceed
the brand of the garage door
the frequency signal has been
with "Programming" step 2.
opener
(or other rolling code
learned. The indicator light will flash
equipped device), repeat this
slowly and then rapidly after several
sequence a third time to complete
seconds upon successful training.
For questions or comments, contact
the programming process.
HomeLink®omelwww.homelink.com or
1-800-355-3515.
Operating HomeLink®
HomeLink® should now activate your
To operate, simply press and release
rolling code equipped device.
the programmed HomeLink® button.
Activation will now occur for the
trained device
(i.e. garage door
opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.
3-26
Erasing HomeLink® buttons
Side View Mirrors
i
Information
Individual buttons cannot be erased.
This device complies with Part 15 of
However, to erase all three pro-
the FCC Rules.
grammed buttons:
Operation is subject to the following
1. Press and hold the two outer
three conditions:
HomeLink® buttons until the indi-
cator light begins to flash after 10
1. This device may not cause harmful
seconds.
interference, and
3
2. Release both buttons. Do not hold
2. This device must accept any inter-
ference received, including interfer-
for longer than 20 seconds.
ence that may cause undesired
The Integrated HomeLink® Wireless
operation.
Control System is now in the training
(learn) mode and can be pro-
3. The transceiver has been tested and
OPD046016
grammed at any time following the
complies with FCC and Industry
Be sure to adjust mirror angles
appropriate
steps
in
the
Canada rules. Changes or modifi-
before driving.
Programming chapters above.
cations not expressly approved by
the party responsible for compli-
Your vehicle is equipped with both
ance could void the user's authority
left-hand and right-hand side view
NVS® is a registered trademark and
mirrors. The mirrors can be adjusted
to operate the device.
Z-Nav™ is a trademark of the Gentex
remotely with the remote switch. The
Corporation, Zeeland, Michigan.
mirror heads can be folded to help
HomeLink® is a registered trademark
prevent damage during an automatic
owned by Johnson Controls,
car wash or when passing through a
Incorporated, Milwaukee, Wisconsin.
narrow street.
FCC ID: NZLTLMHL4
The right side view mirror is convex.
IC: 4112A-TLMHL4
Objects seen in the mirror are closer
than they appear.
3-27
Convenient features of your vehicle
Use your interior side view mirror or
Blind spot mirror (for U.S.A)
WARNING
direct observation to determine the
actual distance of following vehicles
• Always check the road condi-
when changing lanes.
tion while driving for unex-
pected situations even though
WARNING
the vehicle is equipped with a
blind spot mirror.
Do not adjust or fold the side
• The blind spot mirror is a
view mirrors while driving. This
device made for convenience.
may cause loss of vehicle con-
Do not solely rely on the mir-
trol resulting in an accident.
ror but always pay attention to
OLF044477N
traffic around you.
NOTICE
• Do not scrape ice off the mirror
NOTICE
face; this may damage the sur-
Do not clean the mirror with harsh
face of the glass.
abrasives, fuel or other petroleum
• If the mirror is jammed with ice,
based cleaning products.
do not adjust the mirror by
force. Use an approved spray
de-icer (not radiator antifreeze)
spray, or a sponge or soft cloth
OLF044478N
with very warm water, or move
the vehicle to a warm place and
The Blind Spot Mirror (BSM) is a sup-
plemental mirror that helps reduce
allow the ice to melt.
the driver's blind spot by showing the
rear side area of the vehicle. The
blind spot mirror is equipped on the
left-hand side view mirror.
3-28
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст