Hyundai H1: Body Repair Manual — part 27
110
BODY PANEL REPAIR PROCEDURE - Quarter outer panel
QSAQ2420
21. After completing body repairs, carefully apply under coating to
the wheel well (Refer to the CORROSION PROTECTION).
22. In order to improve corrosion resistance, if necessary, apply a
under body anti-corrosion agent to the wheel well (Refer to the
CORROSION PROTECTION).
111
REAR FLOOR (SHORT BODY)
BODY PANEL REPAIR PROCEDURE - Rear floor
z MIG plug welding
MIG batt welding
RRAF3010
RRAF3023
RRAF3012
WELDING POINTS
Ï
Ï
Ï
Ï
Ï
A
Ñ
Ñ
Ñ
Ñ
Ñ
B
A
B
112
BODY PANEL REPAIR PROCEDURE - Rear floor
REAR FLOOR (LONG BODY)
z MIG plug welding
MIG batt welding
WELDING POINTS
RRAF3020
Ï
Ï
Ï
Ï
Ï
A
B
Ñ
Ñ
Ñ
Ñ
Ñ
B
RRAF3022
RRAF3024
A
113
BODY PANEL REPAIR PROCEDURE - Rear floor
REAR END CORSSMEMBER (PARTIAL)
RRAF3150
REMOVAL
1. Cut the rear end crossmember outer and lower simultaneously at
50 mm apart from the hole marked in the illustration.
2. Cut the rear end crossmember inner at 30 mm apart from the
rear end crossmember outer.
INSTALLATION
Installation is the reverse order of removal. Refer to the service
procedure of rear floor for anti-corrosion treatment and sealing.
RRAF3160
RRAF3170
WELDING POINTS
50mm
30mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст