Hyundai Santa Fe (2006 year). Manual — part 479
FL -526
FUEL SYSTEM
A
SCMFL6640D
9.
Disconnect the leveling tube quick - connector (A).
A
SCMFL6641D
10. Remove the coupling control wiring (A) for 4WD from
the fuel tank cover.
A
SCMFL6642D
11. Remove the fuel tank from the vehicle after unscrew-
ing the fuel tank band mounting nuts (A).
A
SCMFL6643D
INSTALLATION
E1FD378A
1.
Install the fuel tank according to the reverse order of
"REMOVAL" procedure.
Fuel tank band mounting nuts: 39.2 ~ 53.9 N·m
(4.0 ~ 5.5 kgf·m, 28.9 ~ 39.8 lbf·ft)
FUEL DELIVERY SYSTEM-DIESEL
FL -527
FUEL PUMP
REMOVAL
E39D5211
1.
Turn ignition switch OFF and disconnet the negative
(-) battery cable.
2.
Remove the 2nd seat (Refer to group "BD" in this
Shop Manual).
3.
Open the carpet (A) for the fuel pump.
A
SCMFL6644D
4.
Remove the fuel pump service cover (A).
A
SCMFL6645D
5.
Disconnect the fuel pump connector (A), the fuel feed
tube quick - connector (B), the fuel return tube quick -
connector (C) and the suction tube quick - connector
(D).
A
C
E
D
B
SCMFL6646D
6.
Remove the fuel pump after removing the fuel pump
plate cover (E) with SST (No.:09310-2B100).
SCMFL6138L
INSTALLATION
ECB2D8E5
1.
Install the fuel pump according to the reverse order of
"REMOVAL" procedure.
Fuel pump plate cover tightening : 5.9 ~ 6.9 N·m
(0.6 ~ 0.7 kgf·m, 4.3 ~ 5.1 lbf·ft)
FL -528
FUEL SYSTEM
FILLER-NECK ASSEMBLY
REMOVAL
ED541232
1.
Disconnect the fuel filler hose (A).
A
SCMFL6652D
2.
Disconnect the leveling tube quick - connnector (A).
A
SCMFL6653D
3.
Open the fuel filler door, unscrew filler - neck assem-
bly mounting screws (A).
A
SCMFL6655D
4.
Remove the left - rear wheel & tire and the wheel
house.
(Refer to group "DS" in this Shop Manual.)
5.
Remove the filler - neck assembly after unscrewing
the bracket mounting nuts (A).
A
SCMFL6654D
INSTALLATION
E58AAF48
1.
Install the filler - neck assembly according to the re-
verse order of "REMOVAL" procedure.
FUEL DELIVERY SYSTEM-DIESEL
FL -529
ACCELERATION PEDAL
REMOVAL
EDFEF6B5
1.
Turn ignition switch OFF and disconnet the negative
(-) battery cable.
2.
Disconnect the accelerator position sensor connector
(A).
3.
Remove the accelerator assembly from the vehicle
after unscrewing the accelerator mounting bolts (B).
B
B
A
SCMFL6656D
INSTALLATION
EBB5B0CD
1.
Install the accelerator assembly according to the re-
verse order of "REMOVAL" procedure.
Accelerator assembly mounting bolt: 16.7 ~ 25.5
N.m (1.7 ~2.6 kgf.m, 12.3 ~ 18.8 lbf.ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст