Hyundai Santa Fe (2006 year). Manual — part 5
STEERING COLUMN & SHAFT
ST -17
[RHD]
A
SCMST6002L
15. Loosen the dust cover mounting nuts.
Tightening torque Nm (kgf.m, lb-ft):
4 ~ 6 (0.4 ~ 0.6, 2.9 ~ 4.3)
SCMST6516D
16. Disconnect the connector (A).
A
SCMST6517D
17. Disconnect the ignition switch connector (A) and then
remove the steering column assembly by loosening
the steering column mounting bolts and nuts.
Tightening torque Nm (kgf.m, lb-ft):
13 ~ 18 (1.3 ~ 1.8, 9.4 ~ 13.0)
A
SCMST6518D
ST -18
STEERING SYSTEM
DISASSEMBLY
EB23AA9D
KEY LOCK ASSEMBLY
1.
Make a groove on head of the special bolt (A) by using
a punch.
A
SCMST6519D
2.
Remove the key lock assembly from the steering col-
umn by loosing special bolts.
3.
When reassembling the key lock assembly, loosely
install new special bolts to the steering column shaft.
SCMST6535D
4.
Tighten the special bolt until its head is cut off.
SCMST6536D
UNIVERSAL JOINT ASSEMBLY
1.
Remove the universal joint assembly from the steer-
ing column assembly by loosening the bolt (A).
Tightening torque Nm (kfg.m, lb-ft):
30 ~ 35 (3.0 ~ 3.5, 22 ~ 25)
A
SCMST6520D
2.
Reassembly is the reverse of disassembly.
STEERING COLUMN & SHAFT
ST -19
INSPECTION
E5B5514D
1.
Check the steering column shaft for damage and de-
formation.
2.
Check connection for play, damage and smooth oper-
ation.
3.
Check the joint bearing for wear and damage.
INSTALLATION
ED6CC43A
NOTE
Before installing, apply multipurpose grease to each
moving parts.
1.
Installation is the reverse of removal.
CAUTION
Align the marks on the steering wheel and shaft
for reinstallation when installing the steering
wheel.
ST -20
STEERING SYSTEM
MECHANICAL POWER
STEERING SYSTEM
COMPONENTS
EC107BCA
1. Bellows
2. Rack housing
3. Feed tube
4. Valve body assembly
5. Tie rod end assembly
6. Lock nut
[LHD]
[RHD]
1
1
2
2
3
3
4
4
5
5
6
6
SCMST6502L
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст