Hyundai Santa Fe (2006 year). Manual — part 28
AT -64
AUTOMATIC TRANSAXLE (F4A51)
DTC P0712 FLUID(OIL) TEMPERATURE SENSOR CIRCUIT - LOW
COMPONENT LOCATION
EABFE2F5
Refer to DTC P0711.
GENERAL DESCRIPTION
E280CF0F
Refer to DTC P0711.
DTC DESCRIPTION
E940D9AD
Refer to DTC P0711.
DTC DETECTING CONDITION
E912F15B
Item
Detecting Condition
Possible cause
DTC Strategy
• Check for Voltage range
Enable Conditions
• Engine state = RUN
Threshold Value
• voltage < 0.07V
Diagnostic Time
• more than 1sec
Fail Safe
• Learning control and Intelligent shift are inhibited
• Fluid temperature is regarded as 80 C(176 F)
• Sensor signal circuit is
short to ground
• Faulty sensor
• Faulty PCM
SPECIFICATION
EADC79F4
Refer to DTC P0711.
MONITOR SCANTOOL DATA
E659A0E5
Refer to DTC P0711.
TERMINAL & CONNECTOR INSPECTION
EEEAC089
Refer to DTC P0711.
AUTOMATIC TRANSAXLE SYSTEM
AT -65
SIGNAL CIRCUIT INSPECTION
E4E1C15E
1.
Ignition "ON" & Engine "OFF".
2.
Disconnect the "TRANSAXLE FLUID TEMPERATURE SENSOR" connector.
3.
Measure the voltage between terminal "1" of the "TRANSAXLE FLUID TEMPERATURE SENSOR" harness connec-
tor and chassis ground.
Specification : Approx. 5 V
C09
1
2
3
4
5
6
7
8
9
10
11
12
1.TRANSAXLE FLUID TEMPERATURE SENSOR
2.Sensor ground
SCMAT6710L
4.
Is voltage within specifications?
YES
▶ Go to "Component Inspection" procedure.
NO
▶ Check for short to ground in harness. Repair as necessary and Go to "Verification of Vehicle Repair" procedure.
COMPONENT INSPECTION
EE688D63
Refer to DTC P0711.
VERIFICATION OF VEHICLE REPAIR
EEECDE81
Refer to DTC P0711.
AT -66
AUTOMATIC TRANSAXLE (F4A51)
DTC P0713 FLUID(OIL) TEMPERATURE SENSOR CIRCUIT - HIGH
COMPONENT LOCATION
E112171F
Refer to DTC P0711.
GENERAL DESCRIPTION
E4C2B6D1
Refer to DTC P0711.
DTC DESCRIPTION
EB21AF10
This DTC code is set when the ATF temperature output voltage is higher than a value generated by thermistor resistance,
in a normal operating range, for an extended period of time . The TCM regards the ATF temperature as fixed at a value
of 80 C(176 F).
DTC DETECTING CONDITION
ED640D86
Item
Detecting Condition
Possible cause
DTC Strategy
• Check for Voltage range
Enable Conditions
• Intake air temperature ≥ -23.5 C(-10.3 F)
• Engine state = RUN
Threshold Value
• Voltage ≥ 4.9V
Diagnostic Time
• more than 1sec
Fail Safe
• Learning control and Intelligent shift are inhibited
• Fluid temperature is regarded as 80 C(176 F)
• Sensor signal circuit is
short to ground
• Faulty sensor
• Faulty PCM
SPECIFICATION
EB5D8F22
Refer to DTC P0711.
MONITOR SCANTOOL DATA
EA9AC2B4
Refer to DTC P0711.
TERMINAL & CONNECTOR INSPECTION
EF3D1B31
Refer to DTC P0711.
AUTOMATIC TRANSAXLE SYSTEM
AT -67
SIGNAL CIRCUIT INSPECTION
EBD69471
1.
Ignition "ON"& Engine "OFF".
2.
Disconnect the "TRANSAXLE FLUID TEMPERATURE SENSOR" connector.
3.
Measure the voltage between terminal "1" of the "TRANSAXLE FLUID TEMPERATURE SENSOR" harness connec-
tor and chassis ground.
Specification : Approx. 5 V
C09
1
2
3
4
5
6
7
8
9
10
11
12
1.TRANSAXLE FLUID TEMPERATURE SENSOR
2.Sensor ground
SCMAT6710L
4.
Is voltage within specifications ?
YES
▶ Go to "Ground circuit inspection" procedure.
NO
▶ Check for short to ground in harness. Repair as necessary and Go to "Verification of Vehicle Repair" procedure .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст