Hyundai Santa Fe (2006 year). Manual — part 121
INTERIOR
BD -67
5.
Disconnect the connector (A).
A
SCMBD6076D
6.
After loosening the mounting screw, remove the cen-
ter facia panel (A).
A
: Screw Locations, 2
SCMBD6077L
7.
Installation is the reverse of removal.
NOTE
-
Make sure the connector are plugged in properly.
LOWER PANEL REPLACEMENT
1.
Remove the crash pad side cover. (See page BD- 69)
2.
Remove the switch assembly (A).
[LHD]
A
SCMBD6079D
[RHD]
A
SCMBD6079R
BD -68
BODY (INTERIOR AND EXTERIOR)
3.
Loosen the mounting screw, remove the lower panel
(B).
4.
Disconnect the connector (A).
[LHD]
A
B
: Screw Locations, 4
SCMBD6080L
[RHD]
A
B
: Screw Locations, 4
SCMBD6080R
5.
Remove the reinforcing panal(A).
A
: Screw Locations, 1
SCMBD6521L
6.
Installation is the reverse of removal.
INTERIOR
BD -69
HEATER CONTROL UNIT REPLACEMENT
1.
Remove the center pacia panel. (See page BD- 67)
2.
After loosening the heater control mounting screw, re-
move the heater control unit (A).
A
: Screw Locations, 4
SCMBD6081L
3.
Disconnect the connector (A).
A
SCMBD6082D
4.
Installation is the reverse of removal.
NOTE
-
Make sure the connector is plugged in properly.
AUDIO ASSENBLY REPLACEMENT
1.
Remove the center facia panel. (See page BD- 67)
2.
Loosen the screws.
3.
Disconnect the audio connector and antenna cable,
then remove the audio assembly (A).
A
: Screw Locations, 4
SCMBD6083L
4.
Installation is the reverse of removal.
NOTE
-
Make sure the connector are plugged in properly.
BD -70
BODY (INTERIOR AND EXTERIOR)
GLOVE BOX REPLACEMENT
1.
Disconnect the damper (B) from the glove box (A).
B
A
SCMBD6084D
2.
Remove the glove box (A) from the lift (B).
A
B
SCMBD6085D
3.
Disconnect the pine (A), then remove the glove box
(B).
A
B
SCMBD6086D
4.
Remove the glove box housing (A).
A
Fastener Locations
: Bolt, 2
: Screw, 2
SCMBD6253L
5.
Installation is the reverse of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст