Hyundai Santa Fe (2006 year). Manual — part 281
GENERAL
EE -3
TROUBLESHOOTING
E23DF8A6
CHARGING SYSTEM
Symptom
Suspect Area
Remedy
Charging warning indicator
does not light with ignition
switch "ON" and engine off
Fuse blown
Light burned out
Wiring connection loose
Electronic voltage regulator
Check fuses
Replace light
Tighten loose connections
Replace voltage regulator
Charging warning indicator
does not go out with engine
running (Battery requires
frequent recharging)
Drive belt loose or worn
Battery cables loose, corroded or worn
Fuse blown
Fusible link blown
Electronic voltage regulator or generator
Wiring
Adjust tension or replace drive belt
Repair or replace cables
Check fuses
Replace fusible link
Test generator
Repair wiring
Engine hesitates/poor
acceleration
Overcharge
Drive belt loose or worn
Wiring connection loose or open circuit
Fusible link blown
Poor grounding
Electronic voltage regulator or generator
Worn battery
Electronic voltage regulator
Voltage sensing wire
Adjust tension or replace drive belt
Tighten loose connection or
repair wiring
Replace fusible link
Repair
Test generator, if faulty, repair or replace
Replace battery
Replace voltage regulator
Repair wire
STARTING SYSTEM
Symptom
Suspect Area
Remedy
Engine will not crank
Battery charge low
Battery cables loose, corroded or worn out
Transaxle range switch (Vehicle with
automatic transaxle only)
Fusible link blown
Starter motor faulty
Ignition switch faulty
Charge or replace battery
Repair or replace cables
Adjust or replace switch
Replace fusible link
Repair starter motor
Inspect
Engine cranks slowly
Battery charge low
Battery cables loose, corroded or worn out
Starter motor
Charge or replace battery
Repair or replace cables
Repair starter motor
Starter keeps running
Starter motor
Ignition switch
Repair starter motor
Inspect
Starter spins but engine
will not crank
Short in wiring
Pinion gear teeth broken or starter motor
Ring gear teeth broken
Repair wiring
Repair starter motor
Replace flywheel ring gear or
torque converter
EE -4
ENGINE ELECTRICAL SYSTEM
SPECIAL SERVICE TOOL
ECC7A874
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373–27000)
EBDD700A
Removal and installation of
alternator pulley
REFERENCE SERVICE TOOLS
Tool (Number and name)
Illustration
Use
MCR-570 KIT
Battery checker
LBLG001A
For testing 12-volt automotive
staring battery and for testing
12-volt charging system.
(Using with Terminal Pinter_182-
003A)
GENERAL
EE -5
THE MICRO 570 ANALYZER
E427CDBF
The MICRO 570 Analyzer provides the ability to test
the charging and starting systems, including the battery,
starter and generator.
CAUTION
Because of the possibility of personal injury, al-
ways use extreme caution and appropriate eye
protection when working with batteries.
EBRF004A
KEYPAD
The MICRO570 button on the key pad provides the follow-
ing functions :
Use the ARROW buttons to scroll
to menu choices
Press the ENTER button to
make selections
Press the CODE button to
generate a Warranty Code
Press the MENU button to print
and view the last test result, set
the time, use the voltmeter, and
esport data to a PC (feature not
currently used by Hyundai)
EBRF005A
EE -6
ENGINE ELECTRICAL SYSTEM
BATTERY TEST PROCEDURE
1.
Connect the tester to the battery.
-
Red clamp to battery positive (+) terminal.
-
Black clamp to battery negative (-) terminal.
EBRF006A
CAUTION
Connect clamps securely. If "CHECK CONNEC-
TION" message is displayed on the screen, recon-
nect clamps securely.
2.
The tester will ask if the battery is connected "IN A
VEHICLE" or "OUT OF A VEHICLE". Make your se-
lection by pressing the arrow buttons; then press EN-
TER.
SCMEE6200L
3.
Choose either CCA or CCP and press the ENTER
button.
SCMEE6101L
NOTE
• CCA : Cold cranking amps, is an SAE specifica-
tion for cranking batteries at -18 C (0 F).
• CCP : Cold cranking amps, is an SAE specifica-
tion for korean manufacturer’s for cranking bat-
teries at -18 C (0 F).
4.
Set the CCA value displayed on the screen to the CCA
value marked on the battery label by pressing up and
down buttons and press ENTER.
SCMEE6102L
NOTE
The battery ratings(CCA) displayed on the tester must
be identical to the ratings marked on battery label.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст