Hyundai Santa Fe (2006 year). Manual — part 649
FLA -662
FUEL SYSTEM
4.
Open the service cover for sub fuel sender (A).
A
SCMFL6649D
5.
Disconnect the sub fuel sender connector (A).
A
SCMF16144L
6.
Lift the vehicle and remove the muffler assembly and
the propeller shaft (4WD) (Refer to "EM" and "DS"
groups in this SERVICE MANUAL).
7.
Support the fuel tank with a jack.
8.
Disconnect the fuel filler hose (A).
A
SCMFL6640D
9.
Disconnect the leveling hose quick-connector (A) and
the vacuum tube quick-connector (B) connecting the
canister and the fuel tank air filter.
B
A
SCMF16013L
10. Disconnect the vacuum hoses (A,B).
A
B
SCMF16145L
11. Disconnect the 4WD coupling control wiring (A) from
the fuel tank cover.
A
SCMFL6642D
FUEL DELIVERY SYSTEM
FLA -663
12. Unscrew the fuel tank bank mounting nuts (A) and
remove the fuel tank from the vehicle.
A
SCMFL6643D
INSTALLATION
EB787B61
1.
Install the fuel tank in according to the reverse order
of "REMOVAL" procedure.
Fuel tank band mounting nuts: 39.2 ~ 53.9N·m
(4.0 ~ 5.5kgf·m, 28.9 ~ 39.8lbf·ft)
FLA -664
FUEL SYSTEM
FILLER-NECK ASSEMBLY
REMOVAL
EDDD3969
1.
Disconnect the fuel filler hose (A).
A
SCMFL6640D
2.
Disconnect the leveling hose quick-connector (A) and
the vacuum tube quick-connector (B) connecting the
canister and the fuel tank air filter.
B
A
SCMF16013L
3.
Open the fuel filler door and unfasten the filler-neck
assembly mounting screws (A).
A
SCMFL6655D
4.
Remove the rear-LH wheel & tire, and the inner wheel
house (Refer to "DS" group in this SERVICE MAN-
UAL).
5.
Remove the bracket mounting nuts (A) and remove
the filler-neck assembly.
A
SCMF16010L
INSTALLATION
E099635F
1.
Install the filler-neck assembly in according to the re-
verse order of "REMOVAL" procedure.
FUEL DELIVERY SYSTEM
FLA -665
ACCELERATOR PEDAL
REMOVAL
EEBBB3FC
1.
Turn ignition switch off and disconnect the battery (-)
cable from the battery.
2.
Disconnect the accelerator position sensor connector
(A).
B
B
A
SCMFL6656D
3.
Unfasten the mounting nuts (B) and remove the ac-
celerator pedal from the vehicle.
INSTALLATION
ED3291DE
1.
Install the accelerator pedal in according to the re-
verse order of "REMOVAL" procedure.
Accelerator pedal mounting nuts: 16.7 ~ 25.5N·m
(1.7 ~ 2.6kgf·m, 12.3 ~ 18.8lbf·ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст