Hyundai Santa Fe (2006 year). Manual — part 152
ETACS (ELECTRONIC TIME AND ALARM CONTROL SYSTEM)
BE -69
6)
In LIGHT ON state, in case of the AUTO LIGHT
SENSOR value is the input value of the LIGHT
OFF, LIGHT shall be OFF after 2.5 ± 0.2sec.
7)
If the SENSOR value is the input value of the
TAIL LAMP ON, then TAIL LAMP RELAY shall be
ON only, and if it is the input value of the HEAD
LAMP ON, then HEAD LAMP HIGH RELAY shall
be ON so that HEAD LAMP HIGH can be con-
trolled by TAIL LAMP RELAY, HEAD LAMP RE-
LAY, and multifunction (M/F) SW.
8)
In the condition of LIGHT ON, when AUTO LIGHT
SW is ON, HEAD LAMP RELAY shall be ON im-
mediately, and when AUTO LIGHT SW is OFF,
LIGHT shall be OFF immediately.
The LIGHT ON value of the AUTO LIGHT SEN-
SOR shall be complied with the table below.
TAIL LAMP
HEAD LAMP
ON
0.81 ± 0.05V
0.81 ± 0.05V
OFF
1.41 ± 0.05V
1.41 ± 0.05V
ON
OFF
0V
0.81V
0.41V
SENSOR
VALUE
TAIL LAMP &
HEAD LAMP
CONDITION
SCMBE6159L
9)
The time chart according to filtering time and sen-
sor for each applicable area shall be as follow.
AUTO SW
ON
OFF
TAIL LAMP
CONDITION
ON
OFF
HEAD LAMP
RELAY
ON
OFF
TAIL RELAY
ON
OFF
HEAD LAMP
HIGH RELAY
ON
OFF
IGN 1
ON
OFF
T2
T1
SCMBE6902L
T1 : 2.5±0.2s, T2 : 2.5±0.2s
6.
DAYTIME RUNNING LIGHT
In the case of DRL EUROPE specification, by elim-
inating the SHUNT between the TAIL LAMP RELAY
and the INTERIOR LAMP, the interior lamp is con-
trolled by the DRL RALY.
If the IGN2 & ALT "L" are ON, the Tail Lamp RELAY
and the Head Lamp LOW RELAY shall be ON ;
If TAIL LAMP LOW RELAY is ON by the TAIL SW, the
DRL function shall be canceled.
IGN 2
ON
OFF
ALT'L
ON
OFF
TAIL SW
ON
OFF
TAIL RELAY
ON
OFF
HEAD LAMP
SW
ON
OFF
DRL REALY
ON
OFF
HEAD LAMP
RELAY
ON
OFF
SCMBE6903L
BE -70
BODY ELECTRICAL SYSTEM
7.
REAR FOG LAMP
1)
After the IGN1 is ON and the Tail Lamp SW is
ON, in the state that the HEAD LAMP SW is ON,
if the REAR FOG SW is pressed, the Rear Fog
Lamp shall be ON.
2)
In case of IGN1 ON and the TAIL LAMP and the
HEADLAMP is pushing the REAR FOG SW by
AUTO LIGHT function in state of ON, the REAR
FOG LAMP shall be ON.
3)
In case of IGN1 ON and the TAIL LAMP is ON
by AUTO LIGHT function, and if FOG LAMP SW
is pushing REAR FOG SW in state of ON, the
REAR FOG LAMP shall be ON.
TAIL SW
HEAD LAMP
SW
REAR FOG
SW
REAR FOG
RELAY
IGN1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SCMBE6160L
8.
BUZZER SOUND
1)
BUZZER SOUND SPECIFICATION
Frequency
Frequency
DUTY
Cycle
Sound
Pressure
Remark
SEAT BELT WARNING
800Hz
50%
1.0s
70±10Db
Damped Sound
KEY OPERATED
800Hz
50%
0.7s
70±10Db
Damped Sound
OVER SPEED WARNING /
SEAT BELT REMINDER (EC)
800Hz
50%
1.0s
70±10Db
Continuous Sound
PARKING START WARINGI
800Hz
50%
1.0s
70±10Db
Continuous Sound
SEAT BELT WARNING
KEY OPERATED WARNING
OVER SPEED WARNING /
SEAT BELT REMINDER (EC)
PARKING START WARNING
0.3s
0.7s
0.3s
0.7s
0.5s
0.5s
0.7s
SCMBE6161L
2)
The Priority Order: OVER SPEED WARNING >
S/BELT WARNING > KEY OPERATED WARN-
ING > PARKING START WARNING
3)
If the output is OFF, maintain the output until the
OFF cycle
4)
Sound pressure measurement distance : 1.0 m
ETACS (ELECTRONIC TIME AND ALARM CONTROL SYSTEM)
BE -71
9.
SEAT BELT WARNING TIMER
CONDITION 1
State
Description
Initial condition
IGN1 OFF
Transition condition
Driver side seat belt is belted and IGN1 is ON
Operating
-
Start 6 seconds driver indicator blinking
-
The automaton state is changed to IGN1 ON DRIVER BELTED
CONDITION 2
State
Description
Initial condition
IGN1 OFF
Transition condition
Driver side seat belt is unbelted and IGN1 is ON
Operating
-
Start 6 seconds driver indicator blinking
-
Start 6 seconds buzzer warning
-
The automaton state is changed to IGN1 ON DRIVER UNBELTED
CONDITION 3
State
Description
Initial condition
IGN1 ON DRIVER BELTED
Transition condition
IGN1 OFF
Operating
-
Start 6 seconds driver indicator blinking
-
Start 6 seconds buzzer warning
-
The automaton state is changed to IGN1 OFF
CONDITION 4
State
Description
Initial condition
IGN1 ON DRIVER BELTED
Transition condition
Driver side seat belt is unbelted
Operating
-
Start 6 seconds driver indicator blinking
-
Start 6 seconds buzzer warning
-
The automaton state is changed to IGN1 ON DRIVER UNBELTED
BE -72
BODY ELECTRICAL SYSTEM
CONDITION 5
State
Description
Initial condition
IGN1 ON DRIVER BELTED
Transition condition
IGN1 OFF
Operating
-
Start 6 seconds driver indicator blinking
-
Start 6 seconds buzzer warning
-
The automaton state is changed to IGN1 OFF
CONDITION 6
State
Description
Initial condition
IGN1 ON DRIVER BELTED
Transition condition
Driver side seat belt is belted
Operating
-
Start 6 seconds buzzer warning
-
The automaton state is changed to IGN1 ON DRIVER BELTED
SEATBELT
SW
SEATBELT
IND.
IGN
ON
OFF
ON
OFF
ON
OFF
BELT
UNBELT
CHIME
BUZZER
T1
T1
T1
T2
T3
SCMBE6162L
T1 : 6 ± 1 sec, T2 : 1 ± 0.1 sec,
T3 : 0.6 ± 0.1 sec
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст