Hyundai Santa Fe (2006 year). Manual — part 113
EXTERIOR
BD -35
POWER WINDOW MOTOR REPLACEMENT
1.
Remove the rear door trim. (See page BD- 32)
2.
After disconnecting the connector (A), remove the
power window motor (B).
A
B
Fastener Locations
: Screw, 2
: Screw, 1
SCMBD6048L
3.
Installation is the reverse of removal.
NOTE
-
Roll the glass up down to see if it move freely
without binding.
OUTSIDE HANDLE REPLACEMENT
1.
Remove the door trim. (See page BD- 32)
2.
Loosen the mounting bolt, then remove the handle
cover (A).
A
: Bolt Locations, 2
6.9~10.8 N.m
(0.7~1.1 Kgf.m,
5.1~8.0 lbf.ft)
SCMBD6049L
3.
Remove the outside handle (A).
A
SCMBD6050D
4.
Installation is the reverse of removal.
BD -36
BODY (INTERIOR AND EXTERIOR)
LATCH ASSEMBLY REPLACEMENT
1.
Remove the following parts.
-
Front door trim. (See page BD- 32)
-
Window glass. (See page BD- 34)
-
Inside handle. (See page BD- 36)
-
Outside handle. (See page BD- 35)
2.
Remove the module assembly. (See page BD- 33)
3.
Remove the latch assembly (B).
A
SCMBD6051D
4.
Installation is the reverse the removal.
NOTE
-
Make sure the door locks and opens properly.
INSIDE HANDLE REPLACEMENT
1.
Remove the front door trim. (See page BD- 32)
2.
Loosen the inside handle (A) mounting screw. Push
the inside handle rearward to disconnect.
A
: Screw Locations, 3
SCMBD6052L
3.
Disconnect the lock cable (A) and inside connect ca-
ble (B).
A
B
C
SCMBD6053D
4.
Installation is the reverse of removal.
NOTE
-
Make sure the door locks and opens properly.
EXTERIOR
BD -37
DOOR BELT WEATHERSTRIP REPLACEMENT
1.
Loosen the mounting screw, then remove the door
belt weatherstrip (A).
: Screw Locations, 2
A
ESBF150N
2.
Installation is the reverse of removal.
DOOR WEATHHERSTRIP REPLACEMENT
1.
Loosen the checker mounting bolts.
2.
Detach the clips, then remove the weatherstrip(A).
A
SCMBD6055D
3.
Installation is the reverse the removal.
BD -38
BODY (INTERIOR AND EXTERIOR)
SPEAKER REPLACEMENT
1.
Remove the rear door trim. (See page BD- 32)
2.
After disconnecting the connector (A), remove the
power window motor (B).
A
B
SCMBD6056D
3.
Installation is the reverse of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст