Hyundai Santa Fe (2006 year). Manual — part 778
GENERAL
SS -19
DETAILED TEST F : STEERING WHEEL OFF-CENTER
CONDITIONS
DETAILS/RESULTS/ACTIONS
F1 CHECK THE CLEAR VISION
Place the vehicle on an alignment rack.
●
Is the clear vision within specification ?
⇒
YES
Go to F2.
⇒
NO
Adjust the clear vision to specification.
F2 INSPECT THE STEERING COMPONENTS
1.
Raise and support the vehicle.
2.
Inspect the steering components for excessive wear or damage.
See ST group - specification.
●
Are the steering components excessively worn or damaged ?
⇒
YES
Repair or Install new components as necessary.
⇒
NO
If it tracks corectly, vehicle is OK.
If it tracks incorrectly, Go to Detailed Test G.
SS -20
SUSPENSION SYSTEM
DETAILED TEST G : TRACKS INCORRECTLY
CONDITIONS
DETAILS/RESULTS/ACTIONS
G1 CHECK THE CASTER
Place the vehicle on an alignment rack.
●
Is the caster within specification ?
⇒
YES
Go to G2.
⇒
NO
Replace bent or damaged parts.
G2 CHECK THE REAR SUSPENSION
1.
Measure the vehicle wheel base for LH and RH.
2.
Compare the measurements.
●
Are the measurements the same ?
⇒
YES
If the ride is smooth, vehicle is OK.
If the ride is rough, Go to Detailed TestH.
⇒
NO
Inspect the rear suspension components for wear or damage.
Repair or Install new components as necessary.
DETAILED TEST H : ROUGH RIDE
CONDITIONS
DETAILS/RESULTS/ACTIONS
H1 CHECK THE FRONT SHOCK ABSORBER
1.
Raise support the vehicle.
2.
Inspect the front shock absorber for oil leaks or damage.
●
Are the tires excessively worn or damaged ?
⇒
YES
Install new front shock absorbers.
⇒
NO
Go to H2.
H2 CHECK THE REAR SHOCK ABSORBERS
Inspect the rear shock absorbers for oil leaks or damage.
●
Are the rear shock absorbers leaking ?
⇒
YES
Install new rear shock absorbers.
⇒
NO
The vehicle is OK. Go to TROUBLESHOOTING.
GENERAL
SS -21
DETAILED TEST I : EXCESSIVE NOISE
CONDITIONS
DETAILS/RESULTS/ACTIONS
I1 INSPECT THE SUSPENSION
1.
Raise and support the vehicle.
2.
Inspect the shock absorber mounting bolts.
●
Are the mounting bolts loose or broken ?
⇒
YES
Tighten or Install new shock absorber mounting bolts.
⇒
NO
Go to I2.
I2 INSPECT THE SPRING AND TORSION BARS
Inspect the springs and stabilizer bars for damage.
●
Are the spring or stabilizer bars damaged ?
⇒
YES
Install new spring and/or stabilizer bars.
⇒
NO
Go to I3.
I3 INSPECT THE FRONT SUSPENSION
Inspect the front suspension components for excessive wear or damage.
●
Are the front suspension components worn or damaged ?
⇒
YES
Install new front suspension components.
⇒
NO
The vehicle is OK. Go to TROUBLESHOOTING.
SS -22
SUSPENSION SYSTEM
DETAILED TEST J : INCORRECT TIRE WEAR
CONDITIONS
DETAILS/RESULTS/ACTIONS
J1 INSPECT THE TIRES
1.
Raise and support the vehicle.
2.
Inspect the tires for uneven wear on the inner or outer shoulder.
●
Is there uneven tire wear ?
⇒
YES
Align the vehicle. Install new tires if badly worn.
⇒
NO
Go to J2.
J2 UNEVEN TIRE WEAR
Inspect the tires for a feathering pattern.
●
Do the tires have a feathering pattern ?
⇒
YES
Align the vehicle. Install new tires if badly worn.
⇒
NO
Go to J3.
J3 CHECK FOR CUPPED TIRE
Inspect the tires for cupping or dishing.
●
Are the tires cupped or dished ?
⇒
YES
Balance and Rotate the tires.
⇒
NO
The vehicle is OK. Go to TROUBLESHOOTING.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст