Hyundai Santa Fe (2006 year). Manual — part 133
SEAT
BD -115
4.
Remove the seat back panel (A).
A
SCMBD6149D
5.
Disconnect the scuff band (A).
A
A
A
A
SCMBD6150D
6.
Remove the headrest and headrest guide (A).
A
SCMBD6151D
7.
Remove the seat back (A).
A
SCMBD6152D
8.
Disconnect the adhesives (A) on the front of seat
back, remove the seat back cover (B).
B
A
SCMBD6153D
9.
Installation is the reverse of removal.
BD -116
BODY (INTERIOR AND EXTERIOR)
SEAT CUSHION COVER REPLACEMENT
1.
Remove the third seat assembly. (See page BD- 113)
2.
Disconnect the scuff band (A).
A
A
SCMBD6154D
3.
Remove the seat cushion (A).
A
SCMBD6155D
4.
Disconnect the adhesives (A) on the front of seat
cushion, remove the seat cushion cover (B).
A
B
SCMBD6156D
5.
Installation is the reverse of removal.
SEAT
BD -117
SEAT FRAME REPLACEMENT
1.
Remove the seat back cover. (See page BD- 113)
2.
Remove the seat cushion cover. (See page BD- 116)
3.
After loosening the mounting bolts, then disconnect
the seat back frame (A) and seat cushion frame (B).
A
B
: Bolt Locations, 4
SCMBD6157L
4.
Installation is the reverse of removal.
BD -118
BODY (INTERIOR AND EXTERIOR)
SEAT BELT
REPLACEMENT
E7AFB1F3
FRONT SEAT BELT REPLACEMENT
CAUTION
-
When installing the belt, make sure not to
damaged the pretensioner.
1.
Remove the following items first.
-
Front seat assembly. (See page BD- 94)
-
Front and rear door scuff trim. (See page BD- 81)
2.
After raise the lower anchor cover (A), loosen the
lower anchor mounting bolt (B).
A
B
Bolt 39.2~53.9N.m
(4.0 ~ 5.5Kgf.m, 28.9~39.8lbf.ft)
SCMBD6158L
3.
Remove the center pillar lower trim. (See page BD-
82)
4.
Remove the center pillar upper trim. (See page BD-
82)
5.
Remove the upper anchor (A).
6.
After disconnecting the pretensioner connector lock
pin, remove the connector (B), Loosen the mounting
bolt, then remove the pretensioner (C).
A
C
Bolt 39.2~53.9N.m
(4.0 ~ 5.5Kgf.m, 28.9~39.8lbf.ft)
SCMBD6159L
7.
Installation is the reverse of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст