Hyundai Santa Fe (2006 year). Manual — part 160
ETACS (ELECTRONIC TIME AND ALARM CONTROL SYSTEM)
BE -101
REPLACEMENT
E59EEA1A
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel (A). Avoid damag-
ing retaining clip. (Refer to the Body group - Crash
pad)
[LHD]
SCMBE6154L
[RHD]
SCMBE6154R
3.
Remove the body control module (A) and antenna ca-
ble after loosening 3 bolts and disconnecting connec-
tor.
A
SCMBE6153D
4.
Installation is the reverse of removal.
BE -102
BODY ELECTRICAL SYSTEM
FUEL FILLER DOOR
OPENER
COMPONENT LOCATION
E6EB50CF
1*
2
1. Fuel filler door open switch
2. Fuel filler door release actuator
The parts with asterisk(*) :
This illustration shows the LHD type.
RHD type is symmetrical.
SCMBE6180L
FUEL FILLER DOOR OPENER
BE -103
FUEL FILLER DOOR RELEASE
ACTUATOR
INSPECTION
E2F1D93F
1.
Remove the rear seat. (Refer to the Body group -
Rear seat).
2.
Remove the luggage side trim. (Refer to the internal
trim)
3.
Open the fuel filter door and disconnect the wiring
connector after loosening 2 nuts.
4.
Check for continuity between terminal No. 1 and No.
2. If there is no continuity replace the fuel filler door
release actuator (A).
1
2
A
ATKF181A
BE -104
BODY ELECTRICAL SYSTEM
FUEL FILLER DOOR OPEN
SWITCH
INSPECTION
EE6CC63B
1.
Remove the front door trim panel. (Refer to the Body
group - front door)
2.
Disconnect the switch connector (4P) from wiring.
3.
Check the switch for continuity between the No. 1 and
No. 2 terminals.
4.
If the continuity is not as specified, replace the switch.
1
2
3
4
SCMBE6182D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст