Hyundai Santa Fe (2019 year). Instruction — part 12
Convenient features of your vehicle
Head Up Display Setting
i
Information
On the LCD display, you can change
If you select the Turn By Turn (TBT)
the head up display settings as fol-
navigation information as HUD con-
lows.
tents, the Turn By Turn (TBT) naviga-
• Display height
tion information will not be displayed
on the LCD Display.
• Rotation
• Brightness
• Content selection
• Speedometer size
• Speedometer colour
For more details, refer to "LCD
Display" in this chapter.
3-110
LIGHTING
Exterior lights
NOTICE
Lighting control
•
Do not cover or spill anything on
the sensor (1) located on the
instrument panel.
•
Do not clean the sensor using a
window cleaner, the cleanser
may leave a light film which
3
could interfere with sensor oper-
ation.
•
If your vehicle has window tint
OTM048073
or other types of metallic coat-
ing on the front windscreen, the
AUTO light position (if equipped)
AUTO light system may not work
OPDE046065
When the light switch is in the AUTO
properly.
position, the position lamp and head-
lamp will be turned ON or OFF auto-
To operate the lights, turn the knob at
matically depending on the amount
the end of the control lever to one of
the following positions:
of light outside the vehicle.
(1) O (OFF) position
Even with the AUTO light feature in
operation, it is recommended to
(2) AUTO light position (if equipped)
manually turn ON the lamps when
(3) Position lamp position
driving at night or in a fog, or when
(4) Headlamp position
you enter dark areas, such as tun-
nels and parking facilities.
3-111
Convenient features of your vehicle
High beam operation
OAE046469L
OAE046467L
Position lamp position (
)
Headlamp position (
)
OAE046453L
The position lamp, license plate lamp
The headlamp, position lamp, license
To turn on the high beam headlamp,
and instrument panel lamp are turned
plate lamp and instrument panel lamp
push the lever away from you. The
ON.
are turned ON.
lever will return to its original position.
The high beam indicator will light
i
Information
when the headlamp high beams are
The ignition switch must be in the ON
switched on.
position to turn on the headlamp.
To turn off the high beam headlamp,
pull the lever towards you. The low
beams will turn on.
WARNING
Do not use high beam when there
are other vehicles approaching
you. Using high beam could
obstruct the other driver's vision.
3-112
High Beam Assist (HBA) system
4.The High Beam Assist (HBA) will
(if equipped)
turn on when vehicle speed is
above 25mph (40km/h).
1) If the light switch is pushed away
when the High Beam Assist
(HBA) is operating, the High
Beam Assist (HBA) will turn off
and the high beam will be on
3
continuously.
2) If the light switch is pulled
towards you when the high
beam is off, the high beam will
OAE046455L
turn on without the High Beam
To flash the high beam headlamp,
Assist
(HBA) cancelled. When
pull the lever towards you, then
you let go of the light switch, the
OPDE046057
release the lever. The high beams
lever will move to the middle and
High Beam Assist (HBA) is a system
will remain ON as long as you hold
the high beam will turn off.
that automatically adjusts the head-
the lever towards you.
3) If the light switch is pulled
lamp range (switches between high
towards you when the high
beam and low beam) according to
beam is on by the High Beam
the brightness of other vehicles and
Assist (HBA), the low beam will
road conditions.
be on and the High Beam Assist
(HBA) will turn off.
Operating condition
4) If the light switch is placed to the
headlamp position, the High
1. Place the light switch in the AUTO
Beam Assist (HBA) will turn off
position.
and the low beam will be on
2. Turn on the high beam by pushing
continuously.
the lever away from you.
3. The High Beam Assist (HBA) (
)
indicator will illuminate.
3-113
Convenient features of your vehicle
When the High Beam Assist (HBA) is
Warning light and message
CAUTION
operating, the high beam switches to
low beam in the following conditions.
The system may not operate
-
When the headlamp of an on-com-
normally in the following condi-
ing vehicle is detected.
tions.
-
When the tail lamp of a vehicle in
When the light from on-com-
front is detected.
ing or vehicle in front is dim
-
When headlamp/tail lamp of bicy-
•
When the in light from the on-
cle/motorcycle is detected.
coming or vehicle in front in is
-
When the surroundings are bright
not detected because of lamp
enough high beams are not needed.
damage, hidden from sight,
-
When streetlights or other lights
etc.
OOS047127R
are detected.
•
When the lamp of the on-com-
When the High Beam Assist (HBA) is
-
When the light switch is not in the
ing or vehicle in front is cov-
not working properly, the warning
ered with dust, snow or water.
AUTO position.
message will come on for a few sec-
-
When the High Beam Assist (HBA)
•
When the vehicle in front’s
ond. After the message disappears,
is off.
headlamps are off but the fog
the master warning light (
) will illu-
lamps on and etc.
-
When vehicle speed is below 22mph
minate.
(35 km/h).
We recommend that you take your
vehicle to a HYUNDAI authorised
repairer and have the system
checked.
3-114
When it is affected by an
• When a vehicle suddenly
WARNING
external condition
appears from around a corner.
•
When there is a similar
• When the vehicle is tilted from
•
Do not disassemble a front
shaped lamp with the vehicle
a flat tyre or being towed.
view camera temporarily for
front vehicle’s lamps.
tinted window or attaching
• When the Lane Keeping Assist
any types of coatings and
•
When the headlamp is not
(LKA) system warning light illu-
accessories. If you disassem-
repaired or replaced at a
minates. (if equipped)
3
ble the camera and assemble
HYUNDAI authorised repairer.
When the front visibility is poor
it again, we recommend that
•
When headlamp aiming is not
•
When the lamp of the on-com-
you take your vehicle to a
properly adjusted.
ing or vehicle in front is cov-
HYUNDAI authorised repairer
•
When driving on a narrow
ered with dust, snow or water.
and have the system checked
winding road or rough road.
to need a calibration.
•
When the light from the on-
•
When driving downhill or
coming or vehicle in front is not
•
When you replace or reinstall
uphill.
detected because of exhaust
the windscreen glass, front
•
When only part of the vehicle
fume, smoke, fog, snow, etc.
view camera, we recommend
in front is visible on a cross-
•
When the front window is cov-
that you take your vehicle to a
road or on a corner.
ered with foreign matter.
HYUNDAI authorised repairer
and have the system checked.
•
When there is a traffic light,
•
When it is hard to see because
reflecting sign, flashing sign
of fog, heavy rain or snow etc.
•
Be careful that water doesn’t
or mirror.
get into the High Beam Assist
(HBA) unit and do not remove
•
When the road conditions are
or damage related parts of the
bad such as being wet or cov-
High Beam Assist (HBA) sys-
ered with snow.
tem.
•
When the vehicle in front
headlamps are off but the fog
lamps on.
3-115
Convenient features of your vehicle
Turn signals and lane change
One-touch turn signal function
•
Do not place objects on the
signals
To activate a one-touch turn signal
crash pad that reflect light
function, move the turn signal lever
such as mirrors, white paper,
slightly and then release it. The lane
etc. The system may malfunc-
change signals will blink 3, 5 or 7
tion if sunlight is reflected.
times.
•
At times, the High Beam
You can activate/deactivate the One
Assist
(HBA) may not work
Touch Turn Signal function or choose
properly. The system is for
the number of blinks (3, 5, or 7) from
your convenience only. It is
the User Settings mode on the LCD
the responsibility of the driver
display. For more details, refer to
for safe driving practices and
"LCD Display" in this chapter.
always check the road condi-
tions for your safety.
•
When the system does not
OTLE045284
Front fog lamps (if equipped)
operate normally, change the
To signal a turn, push down on the
lamp position manually
lever for a left turn or up for a right
between the high beam and
turn in position (A). To signal a lane
low beam.
change, move the turn signal lever
slightly and hold it in position (B).The
lever will return to the OFF position
when released or when the turn is
completed.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
OPDE046066
Fog lamps are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
3-116
Use the switch next to the headlamp
Rear fog lamp (if equipped)
switch to turn the fog lamps ON and
OFF.
1. Turn on the position lamp.
2. Turn the light switch (1) to the front
fog lamp position.
3. To turn off the front fog lamp, turn
3
the light switch to the front fog
lamp position again or turn off the
position lamp.
OTLE045285
NOTICE
Vehicle without front fog lamps
OPDE046064
When in operation, the fog lamps
To turn on the rear fog lamp:
Vehicle with front fog lamps
consume large amounts of vehicle
Position the light switch in the head-
electrical power. Only use the fog
To turn on the rear fog lamp:
lamp position, and then turn the light
lamps when visibility is poor.
Position the light switch in the posi-
switch (1) to the rear fog lamp position.
tion lamp position, turn the light
switch (1) to the front fog lamps posi-
tion, and then turn the light switch (1)
To turn the rear fog lamps off, do one
to the rear fog lamp position.
of the following:
To turn the rear fog lamps off, do one
• Turn off the headlamp switch.
of the following:
• Turn the light switch to the rear fog
• Turn off the position light switch.
lamp position again.
• Turn the light switch to the rear fog
lamp position again.
• When the light switch is in the posi-
tion lamp position, if you turn off
the front fog lamps, the rear fog
lamp will also turn off.
3-117
Convenient features of your vehicle
Battery saver function
Headlamp delay function
NOTICE
The purpose of this feature is to pre-
(if equipped)
If the driver gets out of the vehicle
vent the battery from being dis-
If you place the ignition switch to the
through other doors (except dri-
charged. The system automatically
ACC or OFF position with the head-
ver's door), the battery saver func-
turns off the position lamp when the
lamps ON, the headlamps (and/or
tion does not operate and the
driver turns the engine off and opens
position lamps) remain on for about 5
headlamp delay function does not
the driver-side door.
minutes. However, with the engine off if
turn off automatically. Therefore, It
With this feature, the position lamps
the driver’s door is opened and closed,
causes the battery to be dis-
the headlamps (and/or position lamps)
will turn off automatically if the driver
charged. In this case, make sure to
parks on the side of the road at night.
are turned off after 15 seconds.
turn off the headlamps before get-
If necessary, to keep the lamps on
The headlamps
(and/or position
ting out of the vehicle.
when the engine is turned off, perform
lamps) can be turned off by pressing
the following:
the lock button on the remote key or
Daytime running light (DRL)
smart key twice or turning the light
1) Open the driver-side door.
switch to the OFF or AUTO position.
(if equipped)
2) Turn the position lamps OFF and
However, if you turn the light switch
The Daytime Running Lights (DRL)
ON again using the light switch on
to the AUTO position when it is dark
can make it easier for others to see
the steering column.
outside, the headlamps will not be
the front of your vehicle during the
turned off.
day, especially after dawn and before
You can activate or deactivate the
sunset.
Headlamp Delay function from the
The DRL system will turn the dedi-
User Settings mode on the LCD dis-
cated lamps OFF when:
play. For more details, refer to
1. The headlamps or front fog lights
"LCD Display" in this chapter.
are in the ON position.
2. The position light switch is in the
ON position.
3. The engine is turned off.
3-118
Traffic change (if equipped)
Headlamp levelling device
Listed below are examples of appro-
(if equipped)
priate switch settings for varying
The low beam light distribution is
loads. For loading conditions other
asymmetric. If you go abroad to a
than those listed, adjust the switch
country with opposite traffic direction,
position to the most similar situation.
this asymmetric part will dazzle
oncoming car driver.
Switch
To prevent dazzle, ECE regulation
Loading condition
position
demand several technical solutions
3
Driver only
0
(ex. automatic change system, adhe-
sive sheet, down aiming). These
Driver + Front passenger
0
headlamps are designed not to daz-
Full passengers (including driver)
1
zle opposite drivers.
Full passengers (including driver)
You can activate or deactivate the
2
+ Maximum permissible loading
Traffic Change feature from the User
OTM048070R
Driver + Maximum permissible
Settings mode on the LCD display.
3
Manual type
loading
Go to ‘Lights Travel mode’.
To adjust the headlamp beam level
For more details, refer to "LCD
according to the number of the pas-
Display" in this chapter.
sengers and loading weight in the
luggage area, turn the beam levelling
switch.
The higher the number on the switch
position, the lower the headlamp
beam level. Always keep the head-
lamp beam at the proper levelling
position, otherwise headlamps may
dazzle other road users.
3-119
Convenient features of your vehicle
Automatic type
AFS (Adaptive Front-Lighting
It automatically adjusts the head-
System) (if equipped)
lamp beam level according to the
number of passengers and loading
weight in the luggage area.
It also adjusts to the appropriate head-
lamp beam level for various situations.
WARNING
If the function does not work
OTM048461L
properly, we recommend that
the system be inspected by a
If the AFS malfunction indicator
HYUNDAI authorised repairer.
comes on, the AFS is not working
OTM048073
Do not attempt to inspect or
properly.
Adaptive front lighting system uses
replace the wiring yourself.
Drive to the nearest safe location
the steering angle and vehicle
and restart the engine. If the indica-
speed, to keep your field of vision
tor continuously remains on, we rec-
wide by swiveling and levelling the
ommend that the system be checked
headlamp.
by a HYUNDAI authorised repairer.
Change the switch to the AUTO posi-
tion when the engine is running. The
adaptive front lighting system will
operate when the headlamp is ON.
To turn off the AFS, change the
switch to other positions. After turn-
ing the AFS off, headlamp swiveling
no longer occurs, but levelling oper-
ates continuously.
3-120
Welcome system (if equipped)
• the lamps will turn on when the
Headlamp and position lamp
button of the outside door handle
Welcome light (if equipped)
When the headlamp (lamp switch in
is pressed with the smart key in
the headlamp or AUTO position) is on
possession.
and all doors (and tailgate) are locked
2. If both 'Convenience → Welcome
and closed, the position lamp and
mirror/light → On door unlock' and
headlamp will come on for 15 seconds
'Convenience
→ Welcome
when the door unlock button is
mirror/light → On driver approach'
pressed on the smart key.
3
is selected in the User Settings
At this time, if you press the door lock
mode on the LCD display, the
or unlock button, the position lamp and
lamps will turn on when the vehi-
headlamp will turn off immediately.
cle is approached with the smart
key in possession.
Interior lamp
OTM048072
You can activate or deactivate
When the interior lamp switch is in
Puddle lamp and door handle lamp
Welcome Light function from the
the DOOR position and all doors (and
User Settings mode on the LCD dis-
tailgate) are closed and locked, the
With all the doors
(and tailgate)
play.
room lamp will come on for 30 sec-
closed and locked, the puddle lamp
onds if any of the below is performed.
and door handle lamp will come on
For more details, refer to "LCD
for about 15 seconds if any of the
• When the door unlock button is
Display" in this chapter.
below is performed.
pressed on the smart key.
1. If 'Convenience → Welcome mir-
• When the button of the outside
ror/light
→ On door unlock' is
door handle is pressed with the
selected in the User Settings
smart key in possession.
mode on the LCD display,
At this time, if you press the door lock
• the lamps will turn on when the
or unlock button, the room lamp will
door lock button is pressed on the
turn off immediately.
smart key.
3-121
Convenient features of your vehicle
Interior lights
Front lamps
Front map lamp (
)
NOTICE
■ Type A (Without sunroof)
Press either buttons to turn the map
lamp on or off. This light produces a
Do not use the interior lights for
spot beam for convenient use as a
extended periods when the engine
map lamp at night or as a personal
is turned off otherwise the battery
lamp for the driver and the front pas-
will discharge.
senger.
WARNING
Front room lamp (
)
Do not use the interior lights
Press this button to turn the front and
when driving in the dark.The inte-
rear room lamps on or off.
rior lights may obscure your view
OTM048074
and cause an accident.
■ Type B (With sunroof)
Front door lamp (
)
Interior lamp AUTO cut
The front or rear room lamps come
The interior lamps will automatically
on when the front or rear doors are
go off approximately 20 minutes after
opened if the engine is running or
the engine is turned off and the
not. When doors are unlocked by the
doors are closed. If a door is opened,
smart key, the front and rear lamps
the lamp will go off 40 minutes after
come on for approximately 30 sec-
the engine is turned off. If the doors
onds as long as any door is not
are locked and the vehicle enters the
opened. The front and rear room
armed stage of the theft alarm sys-
lamps go out gradually after approxi-
OTM048075
tem, the lamps will go off five sec-
mately
30 seconds if the door is
onds later.
(1) Front room lamp
closed. However, if the Engine
(2) Front door lamp
Start/Stop button is in the ON posi-
tion or all doors are locked, the front
(3) Front map lamp
and rear lamps will turn off.
3-122
If a door is opened with the Engine
Rear lamps
NOTICE
Start/Stop button in the ACC position
■ Type A
or the OFF position, the front and rear
Do not leave the lamp switches on
lamps stay on for about 20 minutes.
for an extended period of time
when the engine is turned off.
Luggage compartment lamp
3
OTM048076
■ Type B
OTM048079
The luggage compartment lamp
comes on when the tailgate is opened.
NOTICE
OTM048409
The luggage compartment lamp
Rear room lamp switch :
comes on as long as the tailgate is
open. To prevent unnecessary
Press this button to turn the room
charging system drain, close the
lamp on and off.
tailgate securely after using the
tailgate.
3-123
Convenient features of your vehicle
Vanity mirror lamp (if equipped)
Glove box lamp
Puddle lamp
OTM048448R
OTM048077R
OTM048080
Push the switch to turn the light on or
The glove box lamp comes on when
Welcome light
off.
the glove box is opened.
When all doors (and tailgate) are
•
: The lamp will turn on if this
If the glove box is not closed, the
closed and locked, the puddle lamp
button is pressed.
lamp will turn off after 20 minutes.
will come on for 15 seconds if the
•
: The lamp will turn off if this
door is unlocked by the smart key or
button is pressed.
NOTICE
outside door handle button.
For more details, refer to "Welcome
NOTICE
To prevent unnecessary charging
System" in this chapter.
system drain, close the glove box
Always have the switch in the off
securely after using the glove box.
position when the vanity mirror
lamp is not in use. If the sunvisor
is closed without the lamp off, it
may discharge the battery or dam-
age the sunvisor.
3-124
Escort light
When the Engine Start/Stop button
is in the OFF position and the driver's
door is opened, the puddle lamp will
come on for 30 seconds. If the dri-
ver's door is closed within the
30
seconds, the puddle lamp will turn off
after 15 seconds. If the driver's door
3
is closed and locked, the puddle
lamp will turn off immediately.
The Puddle Lamp Escort Light will
turn on only the first time the driver's
door is opened after the engine is
turned off.
3-125
Convenient features of your vehicle
WIPERS AND WASHERS
■ Front windscreen wiper/washer
A : Wiper speed control (front)
Windscreen wipers
·
- Single wipe
Operates as follows when the igni-
· O - Off
tion switch is turned ON.
· --- - Intermittent wipe
: For a single wiping cycle, move
the lever down (
) and release
AUTO* - Auto control wipe
it. The wipers will operate contin-
· 1 - Low wiper speed
uously if the lever is held in this
· 2 - High wiper speed
position.
O : Wipers are not in operation
B : Intermittent control wipe time
--- : Wipers operate intermittently at
OTM048446L
adjustment
the same wiping intervals. Use
■ Rear windscreen wiper/washer
this mode in light rain or mist. To
vary the speed setting, turn the
C : Wash with brief wipes (front)
speed control knob.
1 : Normal wiper speed
D : Rear wiper control*
2 : Fast wiper speed
· 2 - High wiper speed
· 1 - Low wiper speed
· O - Off
E : Wash with brief wipes (rear)
OTM048447L
* : if equipped
3-126
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст