Hyundai Santa Fe Sport (2018 year). Instruction — part 15
Features of your vehicle
Checking the amount of air
Air Conditioning refrigerant
conditioner refrigerant and
label
WARNING
compressor lubricant
Because the refriger-
■ Example
ant is at very high
When the amount of refrigerant is
pressure, the air con-
low, the performance of the air con-
ditioning
system
ditioning is reduced. Overfilling also
should only be serv-
has a negative influence on the air
iced by trained and certified
conditioning system.
technicians. It is important that
Therefore, if abnormal operation is
the correct type and amount of
found, have the system inspected by
oil and refrigerant is used, oth-
an authorized HYUNDAI dealer.
erwise damage to the vehicle
and personal injury may occur.
✽ NOTICE
OHG045533N
It is important that the correct type
and amount of oil and refrigerant is
The actual Air Conditioning refriger-
used. Otherwise, damage to the
ant label in the vehicle may differ
compressor and abnormal system
from the illustration.
operation may occur.
Each symbols and specification on
air conditioning refrigerant label
means as below ;
WARNING
For more detailed information,
1. Classification of refrigerant
we recommend that you contact
2. Amount of refrigerant
an authorized HYUNDAI dealer.
3. Classification of Compressor lubri-
Improper service may cause
cant
serious injury to the person per-
forming the service.
Refer to chapter 8 for more detail
location of air conditioning refrigerant
label.
4
156
Features of your vehicle
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
■ Type A
1. A/C display
2. AUTO (automatic control) button
3. Blower OFF button
4. Air conditioning button
5. Driver's temperature control button
6. Front fan speed control knob
7. Air intake control button
8. Passenger's temperature control button
■ Type B
9. Mode selection button
10. SYNC button
11. Front windshield defroster button
12. Rear window defroster button
13. Climate control information screen
selection button*
* if equipped
ONC047087N/ONC047088N
4 157
Features of your vehicle
Automatic heating and air con-
✽ NOTICE
ditioning
•
To turn the automatic operation
off, select any button or knob of
the following:
- Mode selection button
- Front windshield defrost button
(Press the button one more time
to deselect the front windshield
defroster function. The 'AUTO'
sign will illuminate on the infor-
mation display once again.)
ODM042290
- Fan speed control knob
2. Set the driver’s temperature con-
The selected function will be con-
trolled manually while other func-
trol switch to set the desired tem-
ONC045610C
perature.
tions operate automatically.
1. Press the AUTO button.
•
For your convenience and to
The modes, fan speeds, air intake
improve the effectiveness of the
and air-conditioning will be controlled
climate control, use the AUTO
automatically according to the tem-
button and set the temperature to
perature setting.
73°F (23°C).
4 158
Features of your vehicle
Manual heating and air condi-
Mode selection
tioning
The heating and cooling system can
be controlled manually by pressing
buttons or turning knob(s) other than
the AUTO button. In this case, the
system works sequentially according
to the order of buttons or knob(s)
selected.
1. Start the engine.
ODM042336
2. Set the mode to the desired posi-
tion.
✽ NOTICE
ODM042288
For improving the effectiveness of
Never place anything over the sen-
heating and cooling;
The mode selection button controls
sor located on the instrument panel
the direction of the air flow through
- Heating:
to ensure better control of the heat-
the ventilation system.
ing and cooling system.
- Cooling:
The air flow outlet port is converted
3. Set the temperature control to the
as follows:
desired position.
4. Set the air intake control to the
outside (fresh) air position.
5. Set the fan speed control to the
desired speed.
Refer to the illustration in the
6. If air conditioning is desired, turn
“Manual climate control system”.
the air conditioning system on.
Press the AUTO button in order to
convert to full automatic control of
the system.
4 159
Features of your vehicle
Face-Level
Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.
Bi-Level
ODM042289
ODM042279
Air flow is directed towards the face
and the floor.
Defrost-Level
Instrument panel vents
Most of the air flow is directed to the
The outlet vents can be opened or
windshield with a small amount of air
closed separately using the thumb-
Floor-Level
directed to the side window defrosters.
wheel.
Also, you can adjust the direction of
Most of the air flow is directed to the
air delivered from these vents using
floor, with a small amount of the air
the vent control lever as shown.
being directed to the windshield and
side window defrosters.
Floor & Defrost
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
4 160
Features of your vehicle
Temperature control
Adjusting the driver and passenger
side temperature individually
■ Driver’s side
■ Passenger’s side
•
Press the "SYNC" button again to
adjust the driver and passenger
side temperature individually. The
illumination of button turns off.
•
Press the driver side temperature
control button to adjust the driver
side temperature.
•
Press the passenger side tempera-
ture control button to adjust the
ONC045611C
passenger side temperature.
Adjusting the driver and passenger
ODMECL2003
side temperature equally
The temperature will increase by
• Press the "SYNC" button to adjust
pushing the up button. Each push of
the driver and passenger side tem-
the button will cause the temperature
perature equally.
to increase by 1°F/0.5°C.
The passenger side temperature
The temperature will decrease by
will be set to the same temperature
pushing the down button. Each push
as the driver side temperature.
of the button will cause the tempera-
ture to decrease by 1°F/0.5°C. When
• Press the driver side temperature
set to the lowest temperature setting,
control button. The driver and pas-
the air conditioning will operate con-
senger side temperature will be
tinuously.
adjusted equally.
4 161
Features of your vehicle
Temperature conversion
Air intake control
Recirculated air position
If the battery has been discharged or
■ Type A, B
The indicator light on the
■ Type A
■ Type B
disconnected, the temperature mode
button illuminates when
display will reset to Fahrenheit.
the recirculated air posi-
tion is selected.
To change the temperature unit from
°F to °C or °C to °F:
With the recirculated air position
- On the instrument cluster, go to
selected, air from the passenger
User Settings Mode
➝ Other
compartment will be drawn through
Features ➝ Temperature Unit.
the heating system and heated or
- Press the AUTO button for 3 sec-
cooled according to the function
onds while pressing the OFF but-
selected.
ton. (Automatic climate control sys-
tem)
OANNMM2003
Outside (fresh) air position
This is used to select the outside
■ Type A
With the outside (fresh)
(fresh) air position or recirculated air
Both the temperature unit on the
air position selected, air
position.
cluster LCD display and climate con-
enters the vehicle from
trol screen will change.
To change the air intake control posi-
outside and is heated or
tion, push the control button.
cooled according to the
■ Type B
function selected.
4 162
Features of your vehicle
✽ NOTICE
Fan speed control
WARNING
Prolonged operation of the heater in
the recirculated air position (with-
•
Continued use of the climate
out air conditioning selected) may
control system operation in
cause fogging of the windshield and
the recirculated air position
side windows and the air within the
may allow humidity to
passenger compartment may
increase inside the vehicle
become stale.
which may fog the glass and
In addition, prolonged use of the air
obscure visibility.
conditioning with the recirculated
•
Do not sleep in a vehicle with
air position selected will result in
the air conditioning or heating
excessively dry air in the passenger
system on. This may cause
compartment.
serious harm or death due to
ODM042293
a drop in the oxygen level
and/or body temperature.
The fan speed can be set to the
desired speed by turning the fan
•
Continued use of the climate
speed control knob.
control system operation in
the recirculated air position
The higher the fan speed is, the
may cause drowsiness or
more air is delivered.
sleepiness and loss of vehicle
To turn off the fan speed, press the
control. Set the air intake con-
OFF button.
trol to the outside (fresh) air
position as much as possible
while driving.
4 163
Features of your vehicle
Air conditioning
OFF mode
Climate information screen selec-
tion (if equipped)
■ Type A
■ Type B
OANNMM2004
ODM042295
Push the A/C button to turn the air
Push the OFF button to turn off the
ODM042297
conditioning system on
(indicator
air climate control system. However,
Press the climate information screen
light will illuminate).
you can still operate the mode and
selection button to display climate
air intake buttons as long as the igni-
Push the button again to turn the air
information on the screen.
tion switch is in the ON position.
conditioning system off.
4 164
Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
•
For maximum defrosting, set the
Manual climate control system
WARNING - Windshield
temperature control to the extreme
To defog inside windshield
heating
right/hot position and the fan speed
control to the highest speed.
Do not use the
or
posi-
tion during cooling operation in
•
If warm air to the floor is desired
extremely humid weather. The
while defrosting or defogging, set
difference between the temper-
the mode to the floor-defrost posi-
ature of the outside air and that
tion.
of the windshield could cause
•
Before driving, clear all snow and
the outer surface of the wind-
ice from the windshield, rear win-
shield to fog up, causing loss of
dow, outside rear view mirrors, and
visibility. In this case, set the
all side windows.
mode selection knob or button
•
Clear all snow and ice from the
to the
position and fan
hood and air inlet in the cowl grill to
speed control knob or button to
ODM042298
improve heater and defroster effi-
a lower speed.
ciency and to reduce the probabili-
1. Select desired temperature.
ty of fogging up the inside of the
2. Select any fan speed except “0”
windshield.
position.
3. Select the
or
position.
✽ NOTICE
4. The outside
(fresh) air will be
Be sure to keep the interior surface
selected automatically.
of the windshield clean by wiping it
If the outside (fresh) air position is
with a clean cloth and glass cleaner.
not selected automatically, press the
This will help reduce the tendency of
corresponding button manually.
the glass fogging and also improve
visibility.
4 165
Features of your vehicle
To defrost outside windshield
Automatic climate control sys-
To defrost outside windshield
tem
To defog inside windshield
ODM042299
OANNMM2006
1. Set the temperature to the
1. Set the temperature to the
extreme hot position.
OANNMM2005
extreme hot (HI) position.
2. Set the fan speed to the highest
2. Set the fan speed to the highest
1. Select desired temperature.
(extreme right) position.
(extreme right) position.
2. Select desired fan speed.
3. Select the
position.
3. Press the defrost button (
).
3. Press the defrost button (
).
4. The outside
(fresh) air will be
4. The outside (fresh) air position will
4. The outside (fresh) air position will
selected automatically.
be selected automatically.
be selected automatically.
If the
position is selected, lower
If the outside (fresh) air position is
fan speed is adjusted to a higher fan
not selected automatically, adjust the
speed.
corresponding button manually.
If the
position is selected, lower
fan speed is adjusted to a higher fan
speed.
4 166
Features of your vehicle
Auto defogging system
This indicator illuminates
The auto defogging system is auto-
(if equipped)
when the auto defogging
matically activated when the condi-
system senses the mois-
tions are met. However, if you would
ture of inside the wind-
like to cancel the auto defogging sys-
shield and operates.
tem, press the front defroster button
4 times within 2 seconds while press-
If more moisture is in the vehicle, the
ing the AUTO button. The indicator of
automated steps operate as follows:
the front defroster button will blink 3
If auto defogging does not defog the
times to notify you that the system is
window at step 1, outside air position,
cancelled. To use the auto defogging
step 2, blowing air toward the wind-
system again, follow the procedures
shield occurs.
mentioned above.
Step 1 : Outside air position
If the battery has been disconnected
or discharged, it resets to the auto
Step 2 : Blowing air toward the wind-
ODM042303
defogging status.
shield
Step 3 : Increasing air flow toward
Auto defogging reduces the probabil-
the windshield
ity of fogging up the inside of the
windshield by automatically sensing
Step 4 : Operating the air conditioning
the moisture inside the windshield.
Step 5 : Maximizing the air conditioning
The auto defogging system operates
when the heater or air conditioning is
on.
4 167
Features of your vehicle
✽ NOTICE
• When the air conditioning is
turned on by Auto defogging sys-
tem, if you try to turn off the air
conditioning, the indicator will
blink 3 times and the air condi-
tioning will not be turned off.
• For efficiency, do not select recir-
culated air position while Auto
defogging system is operating.
CAUTION
Do not remove the sensor cover
located on the upper end of the
driver side windshield glass.
Damage to system parts could
occur and may not be covered
by your vehicle warranty.
4 168
Features of your vehicle
STORAGE COMPARTMENTS
Center console storage
Glove box
CAUTION
■ Type A
• To avoid possible theft, do not
leave valuables in the storage
compartments.
• Always keep the storage com-
partment covers closed while
driving. Do not attempt to
place so many items in the
storage compartment that the
storage compartment cover
cannot close securely.
ODMECO2033
■ Type B
ODM042304
WARNING - Flammable
To open the center console storage,
materials
pull up the lever.
Do not store cigarette lighters,
propane cylinders, or other
flammable/explosive materials
in the vehicle. These items may
catch fire and/or explode if the
vehicle is exposed to hot tem-
ODMECO2032
peratures for extended periods.
The glove box can be locked and
unlocked with the mechanical key (1).
To open the glove box, push the but-
ton (2) and the glove box will auto-
matically open (3). Close the glove
box after use.
4 169
Features of your vehicle
Multi box (if equipped)
Sunglass holder
WARNING
To reduce the risk of injury in an
accident or sudden stop, always
keep the glove box door closed
while driving.
CAUTION
Do not keep food in the glove
box for a long time.
ODM042307
ODM042308
To open the cover, push the lever (1)
To open the sunglass holder, press
and the multi box will open automati-
the cover and the holder will slowly
cally.
open. Place your sunglasses in the
compartment door with the lenses
It can be used for storing small items.
facing out. Push to close.
CAUTION
Do not drive with the multi box
open.
4 170
Features of your vehicle
Luggage tray
■ Front
WARNING
■ Rear
•
Do not keep objects except
sunglasses inside the sun-
glass holder. Such objects can
be thrown from the holder in
the event of a sudden stop or
an accident, possibly injuring
the passengers in the vehicle.
•
Do not open the sunglass
holder while the vehicle is
moving. The rear view mirror
OANNCO43013
of the vehicle can be blocked
Front
OANNCO43012
by an open sunglass holder.
1. Grasp the handle on the top of the
You can place a first aid kit, a reflec-
•
Do not put the glasses
cover and lift it.
tor triangle, tools, etc. in the box for
forcibly into a sunglass holder
2. Push the cover toward the front of
easy access.
to prevent breakage or defor-
the vehicle and fold it.
mation of glasses. It may
cause personal injury if you
Rear
try to open it forcibly when the
• Grasp the handle on the top of the
glasses are jammed in holder.
cover and lift it.
4 171
Features of your vehicle
INTERIOR FEATURES
Cup holder
WARNING - Hot liquids
CAUTION
■ Front
•
Do not place uncovered cups
When cleaning spilled liquids,
of hot liquid in the cup holder
do not dry the cup holder at
while the vehicle is in motion.
high temperatures. This may
If the hot liquid spills, you may
damage the chrome part of the
burn yourself. Such a burn to
cup holder.
the driver could lead to loss of
control of the vehicle.
•
To reduce the risk of personal
injury in the event of sudden
OANNCO43014
stop or collision, do not place
■ Rear (if equipped)
uncovered or unsecured bot-
tles, glasses, cans, etc., in the
cup holder while the vehicle is
in motion.
WARNING
Keep cans or bottles out of
direct sun light and do not
put/leave them in a hot vehicle.
ODM042316
The container/contents may
Cups or small beverage cans may be
explode.
placed in the cup holders.
To use the center cup holder, pull
down the armrest and press the open
button.
4 172
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст