Hyundai Tiburon (2008 year). Instruction — part 2
1FEATURES OF YOUR HYUNDAI
14
B129A01F-AAT
B099A02GK-AAT
Rear Seat
Before Folding the Rear Seats
Rear Seat Positions
OGK036008
By pulling up the walk in device lever (1) at the
HGK2034
right-upper side of the passenger side seatback,
the seatback will tilt forward. Then push the seat
B129A01GK
In order to prevent the shoulder belt from being
forward to allow the occupants to enter.
damaged while folding the rear seat, the shoul-
der belt must be passed through the hanger to
Recliner Memory
!
keep it out of the way.
WARNING:
By pulling up the walk in device lever (1) the
This vehicle contains two rear seating po-
seatback is reclined and returned to the original
sitions only and a seat belt for each seating
position.
position. Thus, never permit more than two
occupants to ride in the rear seat because
an unrestrained occupant could be seri-
!
ously injured or killed in the event of a
WARNING:
vehicle crash.
Don't drive with the passenger side seatback
reclined. It is dangerous to move it while
driving. Be sure the seatback is secured
firmly before driving.
FEATURES OF YOUR HYUNDAI
1
15
B110A02S-AAT
Folding Rear Seatbacks
!
!
CAUTION:
WARNING:
o
Seat belts must be removed from the
The purpose of the fold-down rear
hanger when in use.
seatbacks is to allow you to carry longer
objects than could otherwise be accommo-
dated. Never allow passengers to sit on top
of the folded down seat back while the car
is moving as this is not a proper seating
position and no seat belts are available for
use. This could result in injury in case of an
accident or sudden stop. Objects carried
on the folded down seatback should not
extend higher than the top of the front
seats. This could allow cargo to slide for-
HGK2035
ward and cause injury or damage during
sudden stops.
The rear seatbacks may be folded to facilitate
carrying long items or to increase the luggage
OGK016606
capacity of the vehicle.
o
Before folding the seatback, insert the
o To unlock the seatback, push the seatback
buckle in the pocket. This can prevent
locking button, then pull forward on the
the buckle from being damaged by the
seatback panel.
seatback.
o When you return the seatback to its upright
position, always be sure it has locked into
position by pulling and pushing on the top of
the seatback.
1FEATURES OF YOUR HYUNDAI
SEAT BELT
16
B150A02S-AAT
B150B04Y-AAT
Seat Belt Precautions
Infant or Small Child
!
All
50 states have child restraint laws. You
B140A01S-AAT
should be aware of the specific requirements in
!
REAR SEAT WARNING
WARNING:
your state. Child and/or infant safety seats must
All occupants of the vehicle must wear their
be properly placed and installed in the rear seat.
seat belts at all times. Seat belts and child
Information about the use of these restraints
restraints reduce the risk of serious or fatal
begins on page 1-22.
injuries for all occupants in the event of a
collision or sudden stop. Without a seat
belt, occupants could be shifted too close
to a deploying airbag, strike the interior
!
WARNING:
structure or be thrown from the vehicle.
Every person in your vehicle needs to be
Properly worn seat belts greatly reduce
properly restrained at all times, including
these hazards. Even with advanced airbags,
infants and children. Never hold a child in
unbelted occupants can be severely in-
your arms or lap when riding in a vehicle.
jured by a deploying airbag. Always follow
The violent forces created during a crash
the precautions about seat belts, airbags
will tear the child from your arms and throw
and occupant safety contained in this
OGK016140
the child against the interior. Always use a
manual.
child restraint appropriate for your child's
For the safety of all passengers, luggage or
height and weight, see page 1-21.
other cargo should not be piled higher than the
top of the seatback. In addition, do not place
objects on the rear shelf as they may move
forward during braking or in an accident and
strike vehicle passengers.
FEATURES OF YOUR HYUNDAI
1
17
B150C02A-AAT
B150D01A-AAT
NOTE:
Small children are best protected from in-
Larger Children
Pregnant Women
jury in an accident when properly restrained
Children who are too large for child restraint
The use of a seat belt is recommended for
in the rear seat by a child restraint system
systems should always occupy the rear seat
pregnant women to lessen the chance of injury
that meets the requirements of the Federal
and use the available lap/shoulder belts. The lap
in an accident. When a seat belt is used, the lap
Motor Vehicle Safety Standards. Before
portion should be fastened snug on the hips and
belt portion should be placed as low and snugly
buying any child restraint system, make
as low as possible. Check belt fit periodically. A
as possible on the hips, not across the abdo-
sure that it has a label certifying that it
child's squirming could put the belt out of posi-
men. For specific recommendations, consult a
meets Federal Motor Vehicle Safety Stan-
tion. Children are afforded the most safety in the
physician.
dard 213. The restraint must be appropriate
event of an accident when they are restrained
for your child's height and weight. Check
by a proper restraint system in the rear seat. If
the label on the child restraint for this
a larger child (over age 13) must be seated in
information. See page 1-22.
B150E01A-AAT
the front seat, the child should be securely
restrained by the available lap/shoulder belt and
Injured Person
the seat should be placed in the rearmost
A seat belt should be used when an injured
position. Children under the age of 13 should be
person is being transported. When this is nec-
restrained securely in the rear seat. Never
essary, you should consult a physician for
place a child under the age of 13 in the front seat.
recommendations.
NEVER place a rear facing child seat in the front
seat of a vehicle.
B150F01A-AAT
One Person Per Belt
Two people (including children) should never
attempt to use a single seat belt. This could
increase the severity of injuries in case of an
accident.
1FEATURES OF YOUR HYUNDAI
18
B150G02A-AAT
B160A02A-AAT
B160B01A-AAT
Do Not Lie Down
Care of Seat Belts
Periodic Inspection
To reduce the chance of injuries in the event of
Seat belt systems should never be disassembled
It is recommended that all seat belts be in-
an accident and to achieve maximum effective-
or modified. In addition, care should be taken to
spected periodically for wear or damage of any
ness of the restraint system, all passengers
assure that seat belts and belt hardware are not
kind. Parts of the system that are damaged
should be sitting up and the front seats should
damaged by seat hinges, doors or other abuse.
should be replaced as soon as possible.
be in an upright position when the car is moving.
A seat belt cannot provide proper protection if
the person is lying down in the rear seat or if the
!
B160C01A-AAT
front seat is in a reclined position.
WARNING:
Keep Belts Clean and Dry
When you return the rear seatback to its
upright position after the rear seatback was
Seat belts should be kept clean and dry. If belts
!
WARNING:
folded down, be careful not to damage the
become dirty, they can be cleaned by using a
Riding with a reclined seatback increases
seat belt webbing or buckle. Be sure that
mild soap solution and warm water. Bleach, dye,
your chance of serious or fatal injuries in
the webbing or buckle does not get caught
strong detergents or abrasives should not be
the event of a collision or sudden stop. The
or pinched in the rear seat. A seat belt with
used because they may damage and weaken
protection of your restraint system (seat
damaged webbing or buckle will not be as
the fabric.
belts and airbags) is greatly reduced by
strong and could possibly fail during a
reclining your seat. Seat belts must be snug
collision or sudden stop, resulting in seri-
against your hips and chest to work prop-
ous injury.
B160D01A-AAT
erly. The more the seatback is reclined, the
When to Replace Seat Belts
greater the chance that an occupant's hips
will slide under the lap belt causing serious
Entire in-use seat belt assembly or assemblies
internal injuries or the occupant's neck
should be replaced if the vehicle has been
could strike the shoulder belt. Drivers and
involved in an accident. This should be done
passengers should always sit well back in
even if no damage is visible. Additional ques-
their seats, properly belted (see page 1-19),
tions concerning seat belt operation should be
and with the seatbacks upright.
directed to your Hyundai Dealer.
FEATURES OF YOUR HYUNDAI
1
19
B170A04A-AAT
Release the button to lock the anchor into
B180A01L-AAT
Height Adjustable Front Seat Shoulder
position. Try sliding the height adjuster to make
SEAT BELT-Driver's 3-Point System with
Belt
sure that it has locked into the position.
Emergency Locking Retractor:
To Fasten Your Belt
!
WARNING:
o
Verify the shoulder belt anchor is locked
into position at the appropriate height.
Never position the shoulder belt across
your neck or face. Improperly posi-
tioned seat belts can cause serious inju-
ries in an accident.
o
Failure to replace seat belts after an
accident could leave you with damaged
seat belts that will not provide protec-
tion in the event of another collision
HGK2038
leading to personal injury or death.
You can adjust the height of the shoulder belt
B180A01NF
Replace your seat belts after being in an
anchor to one of the 4 positions for maximum
accident as soon as possible.
To fasten your seat belt, pull it out of the retractor
comfort and safety.
and insert the metal tab into the buckle. There
If the height of the adjusting seat belt is too near
will be an audible "click" when the tab locks into
your neck, you will not be getting the most
the buckle.
effective protection. The shoulder portion should
The seat belt automatically adjusts to the proper
be adjusted so that it lies across your chest and
length only after the lap belt portion is adjusted
midway over your shoulder nearest the door
manually so that it fits snugly around your hips.
and not your neck.
If you lean forward in a slow, easy motion, the
To adjust the height of the seat belt anchor,
belt will extend and let you move around. If there
lower or raise the height adjuster into an appro-
is a sudden stop or impact, however, the belt will
priate position. To raise the height adjuster, pull
lock into position. It will also lock if you try to lean
it up. To lower it, push it down while pressing the
forward too quickly. Check to make sure that
height adjuster button.
the belt is properly locked and that the belt is not
twisted.
1FEATURES OF YOUR HYUNDAI
20
B190A02Y-AAT
NOTE:
NOTE:
Seat belt reminder light comes and stays on
SEAT BELTS -Front Passenger and Rear
Although the combination retractor pro-
until the seat belt is fastened when the
Seat 3-Point System with Combination
vides the same level of protection for seated
ignition key is turned "ON" or "START".
passengers in either emergency or auto-
Locking Retractor
And, the warning chime will also sound for
matic locking modes, it is recommended
about 6 seconds.
To Fasten Your Belt
that seated passengers use the emergency
locking feature for improved convenience.
Combination retractor type seat belts are in-
The automatic locking function is intended
stalled in the rear seat positions to help accom-
to facilitate child restraint installation. To
modate the installation of child restraint sys-
convert from the automatic locking feature
tems. Hyundai strongly recommends that chil-
to the emergency locking operation mode,
dren always be seated in the rear seat. NEVER
allow the unbuckled seat belt to fully re-
place any infant restraint system in the front
tract.
seat of the vehicle.
This type of seat belt combines the features of
both an emergency locking retractor seat belt
and an automatic locking retractor seat belt. To
fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There
will be an audible "click" when the tab locks into
the buckle.
When not securing a child restraint, the seat belt
operates in the same way as the driver's seat
belt
(Emergency Locking Retractor Type). It
automatically adjusts to the proper length only
after the lap belt portion of the seat belt is
adjusted manually so that it fits snugly around
your hips. When the seat belt is fully extended
from the retractor to allow the installation of a
child restraint system, the seat belt operation
changes to allow the belt to retract, but not to
extend. (Automatic Locking Retractor Type)
see page 1-27.
FEATURES OF YOUR HYUNDAI
1
21
B200A01A-AAT
B210A01A-AAT
Adjusting Your Seat Belt
To Release the Seat Belt
!
WARNING:
o
For maximum restraint system protec-
tion, seat belts must always be used
whenever the car is moving.
o
Seat belts are most effective when
seatbacks are in the upright position.
o
Children age 12 and younger must al-
ways be properly restrained in the rear
seat. Never allow children to ride in the
front passenger seat. If a child over 13
must be seated in the front seat, he/she
must be properly belted and the seat
should be moved as far back as possible.
o
Never wear the shoulder belt under your
B200A01NF
B210A01NF
arm or behind your back. An improperly
The seat belt is released by pressing the re-
positioned shoulder belt can cause se-
lease button in the locking buckle. When it is
rious injuries in a crash. The shoulder
!
released, the belt should automatically draw
WARNING:
belt should be positioned midway over
back into the retractor.
You should place the lap belt portion as low
your shoulder across your collarbone.
If this does not happen, check the belt to be sure
as possible and snugly across your hips,
o
Avoid wearing twisted seat belts. A
it is not twisted, then try again.
not on your waist. If the lap belt is located
twisted belt can't do its job as well. In a
too high on your waist, it may increase the
collision, it could even cut into you. Be
chance of injury in the event of a collision.
sure the belt webbing is straight and not
Both arms should not be under or over the
twisted.
belt. Rather, one should be over and the
o
Be careful not to damage the belt web-
other under, as shown in the illustration.
bing or hardware. If the belt webbing or
Never wear the seat belt under the arm
hardware is damaged, replace it.
nearest the door.
1FEATURES OF YOUR HYUNDAI
CHILD RESTRAINT SYSTEM
22
B230A03A-AAT
Children riding in the car should sit in the rear
!
!
seat and must always be properly restrained to
WARNING:
WARNING:
minimize the risk of injury in an accident, sudden
o
A child restraint system must be placed
To reduce the chance of serious or fatal
stop or sudden maneuver. According to acci-
in the rear seat. Never install a child or
injuries:
dent statistics provided by the National High-
infant seat on the front passenger's seat.
o
Children of all ages are safer when re-
way Traffic Safety Administration (NHTSA),
Should an accident occur and cause the
strained in the rear seat. A child riding in
children are safer when properly restrained in
passenger side airbag to deploy, it could
the front passenger seat can be force-
the rear seats than in the front seat. Larger
severely injure or kill an infant or child
fully struck by an inflating airbag result-
children not in a child restraint should use one
seated in an infant or child seat. Thus
ing in serious or fatal injuries.
of the seat belts provided.
only use a child restraint in the rear seat
o
Always follow the instructions for in-
All
50 states have child restraint laws. You
of your vehicle.
stallation and use of the child restraint
should be aware of the specific requirements in
o
A safety belt or child restraint system
maker.
your state. Child and/or infant safety seats must
can become very hot if it is left in a closed
o
Always make sure the child seat is se-
be properly placed and installed in the rear seat.
vehicle on a sunny day, even if the out-
cured properly in the car and your child
You must use a commercially available child
side temperature does not feel hot. Be
is securely restrained in the child seat.
restraint system that meets the requirements of
sure to check the seat cover and buckles
o
Never hold a child in your arms or lap
the Federal Motor Vehicle Safety Standards
before placing a child there.
when riding in a vehicle. The violent
(FMVSS).
o
When the child restraint system is not in
forces created during a crash will tear the
Children could be injured or killed in a crash if
use, store it in the trunk or fasten it with
child from your arms and throw the child
their restraints are not properly secured. For
a safety belt so that it will not be thrown
against the car’s interior.
small children and babies, a child seat or infant
forward in the case of a sudden stop or
o
Never put a seat belt over yourself and a
seat must be used. Before buying a particular
an accident.
child. During a crash, the belt could
child restraint system, make sure it fits your car
o
Children may be seriously injured or
press deep into the child causing seri-
and seat belts, and fits your child. Follow all the
killed by an inflating airbag. All children,
ous internal injuries.
instructions provided by the manufacturer when
even those too large for child restraints,
o
Never leave children unattended in a
installing the child restraint system.
must ride in the rear seat.
vehicle - not even for a short time. The
car can heat up very quickly, resulting in
serious injuries to children inside. Even
very young children may inadvertently
cause the vehicle to move, entangle them-
selves in the windows, or lock them-
selves or others inside the vehicle.
FEATURES OF YOUR HYUNDAI
1
23
B230B02GK-GAT
B230C06F-AAT
Using a Child Restraint System
Installing a Child Restraint Seat with the
!
WARNING:
For small children and babies, the use of a child
"Tether Anchorage" System
o
Never allow two children, or any two
seat or infant seat is required. This child seat or
Two child restraint hook holders are located on
persons, to use the same seat belt.
infant seat should be of appropriate size for the
the luggage compartment floor.
o
Children often squirm and reposition
child and should be installed in accordance with
themselves improperly. Never let a child
the manufacturer's instructions. It is further
ride with the shoulder belt under their
required that the seat be placed in the vehicle's
To install the child restraint seat
arm or behind their back. Always prop-
rear seat since this can make an important
erly position and secure children in the
contribution to safety. Your vehicle is provided
Tether Anchor Cover
Child Restraint
rear seat.
with two child restraint hook holders for insta
Hook Holder
o
Never allow a child to stand-up or kneel
lling the child seat or infant seat.
on the seat or floorboard of a moving
vehicle. During a collision or sudden
stop, the child can be violently thrown
against the vehicles interior, resulting in
serious injury.
o
Never use an infant carrier or a child
safety seat that "hooks" over a seatback,
it may not provide adequate security in
an accident.
o
Seat belts can become very hot, espe-
OGK016230
cially when the car is parked in direct
sunlight. Always check seat belt buck-
1.
Open the tether anchor cover on the rear
les before fastening them over a child.
luggage compartment floor.
o
Always store or secure a child seat, even
2.
Route the child restraint seat strap over the
when it is not in use. During a collision
seatback.
or sudden stop, the child seat could be
For vehicles with adjustable headrests, route
thrown inside the vehicle.
the tether strap under the headrest and
between the headrest posts, otherwise route
the tether strap over the top of the seatback.
1FEATURES OF YOUR HYUNDAI
24
Rear luggage compartment floor
To install the child restraint seat:
Blanking covers
For mania pack
!
WARNING:
o
A child can be seriously injured or killed
in a collision if the child restraint is not
properly anchored. Always follow the
child seat manufacturer’s instructions
for installation and use.
o
Never mount more than one child re-
straint to a single tether or to a single
Covering shelf
Child Restraint
lower anchorage point. The increased
Hook Holders
load caused by multiple seats may cause
the tethers or anchorage points to break,
causing serious injury or death.
Tether strap hook
OGK016900L
1.
Remove the front board on the luggage
copartment floor.
2.
Route the child restraint seat strap over the
seatback.
For vehicles with adjustable headrests, route
Front of Vehicle
the tether strap under the headrest and
B230E01GK
between the headrest posts, otherwise route
3.
Remove the blanking covers on the cover-
the tether strap over the top of the seatback.
ing shelf.
3.
Remove the blanking covers on the cover-
4.
Connect the tether strap hook to the child
ing shelf.
restraint hook holder through the hole on the
4.
Connect the tether strap hook to the child
covering shelf and tighten to secure the seat.
restraint hook holder through the hole on the
covering shelf and tighten to secure the seat.
FEATURES OF YOUR HYUNDAI
1
25
B230D05GK-AAT
Securing the child restraint seat with the
o
When using the vehicle’s “ISOFIX” sys-
!
tem to install a child restraint system in
"ISOFIX" system
WARNING:
the rear seat, all unused vehicle rear seat
o
There is no center rear seat position.
belt metal latch plates or tabs must be
o
A child can be seriously injured or killed
latched securely in their seat belt buck-
in a collision if the child restraint is not
les and the seat belt webbing must be
properly anchored. Always follow the
retracted behind the child restraint to
child seat manufacturer’s instructions
prevent the child from reaching and tak-
for installation and use.
ing hold of unretracted seat belts.
o
Never install a child restraint using the
Unlatched metal latch plates or tabs may
ISOFIX anchors at the center position of
allow the child to reach the unretracted
the rear seat. In a crash, the ISOFIX
seat belts which may result in strangu-
anchors may break if a car seat is improp-
lation and a serious injury or death to the
erly placed in the center position result-
child in the child restraint.
ing in serious or fatal injuries. Only place
a ISOFIX or ISOFIX-compatible child seat
B230F01GK
in the left or right out-board rear seating
positions (as shown) to the appropriate
Some child seat manufacturers make child
ISOFIX anchors provided.
restraint seats that are labeled as ISOFIX or
o
Never mount more than one child re-
ISOFIX-compatible child restraint seats. These
straint to a single tether or to a single
seats include two rigid or webbing mounted
lower anchorage point. The increased
attachments that connect to two ISOFIX an-
load caused by multiple seats may cause
chors at specific seating positions in your ve-
the tethers or anchorage points to break,
hicle. This type of child restraint seat eliminates
causing serious injury or death.
the need to use seat belts to attach the child
seat.
ISOFIX anchors have been provided in your
vehicle. The ISOFIX anchors are located in the
left and right outboard rear seating positions.
Their locations are shown in the illustration.
1FEATURES OF YOUR HYUNDAI
26
!
CAUTION:
ISOFIX Anchor
ISOFIX Anchor
Do not allow the rear seat belt webbing to
Position Indicator
get scratched or pinched by the ISOFIX-
seat latch and ISOFIX anchor during the
installation.
!
WARNING:
A child can be seriously injured or killed in
B230D02GK
HGK261
a collision if the child restraint is not prop-
The ISOFIX anchors are located between the
Follow the child seat manufacturer's instruc-
erly anchored to the car and the child is not
seatback and the seat cushion of the rear seat
tions to properly install child restraint seats with
properly restrained in the child restraint.
left and right outboard seating positions.
ISOFIX or ISOFIX-compatible attachments.
Always follow the child seat manufacturer’s
instructions for installation and use.
Once you have installed the ISOFIX child re-
straint, assure that the seat is properly attached
to the ISOFIX and tether anchors. Also, test the
child restraint seat before you place the child in
it. Tilt the seat from side to side. Also try to tug
the seat forward. Check to see if the anchors
hold the seat in place.
FEATURES OF YOUR HYUNDAI
1
27
B230G02O-AAT
If the retractor is in the automatic locking mode,
Child Restraint System Installation on
the belt will be locked. After installation of the
outboard Rear Seats
child restraint system, try to move it in all
!
directions to be sure the child restraint system
WARNING:
On outboard rear seats
o
If the retractor is not in the Automatic
is securely installed. If you need to tighten the
belt, pull more webbing toward the retractor.
Locking mode, the child restraint can
When you unbuckle the seat belt and allow it to
move when your vehicle turns or stops
retract, the retractor will automatically revert
suddenly. A child can be seriously in-
back to its normal seated passenger emer-
jured or killed if the child restraint is not
gency locking usage condition.
properly anchored to the car, including
setting the retractor to the Automatic
Locking mode.
NOTE:
o
Do not install any child restraint system
o
Before installing the child restraint sys-
in the front passenger seat. Should an
tem in any seating position, read the
accident occur and cause the passenger
instructions supplied by the child re-
side airbag to deploy, it could severely
straint system manufacturer.
injure or kill an infant or child seated in
o
If the seat belt does not operate as de-
HGK1010
an infant or child seat. Therefore, only
scribed, have the system checked imme-
To install a child restraint system in the outboard
diately by your authorized Hyundai
use a child restraint system in the rear
rear seats, extend the shoulder/lap belt entirely
dealer.
seat of your vehicle.
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has engaged the auto-
matic locking feature by trying to extend web-
bing out of the retractor.
1FEATURES OF YOUR HYUNDAI
28
B180B05GK-AAT
Driver's airbag
Passenger's
Pre-tensioner Seat Belt (If Installed)
airbag
!
Your Hyundai vehicle is equipped with driver's
1
WARNING:
and front passenger's pre-tensioner seat belts.
To obtain maximum benefit from a pre-
The purpose of the pre-tensioner is to make
tensioner seat belt:
sure that the seat belts fit tightly against the
occupant's body in certain frontal collisions.
o The seatbelt must be worn correctly and
The pre-tensioner seat belts can be activated
adjusted to the proper position (see
alone or, where the frontal collision is severe
pages beginning on 1-18). Please read
enough, together with the airbags.
and follow all of the important informa-
tion and precautions about your vehicle’s
3
occupant safety features - including
seat belts - that are provided in this
2
B180B01GK
manual.
The seat belt pre-tensioner system consists
o Be sure you and your passengers always
mainly of the following components.
wear seat belts and wear them properly.
Their locations are shown in the illustration.
1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module
OMG035300
When the vehicle stops suddenly, or if the
occupant tries to lean forward too quickly, the
seat belt retractor will lock into position. In
certain frontal collisions, the pre-tensioner will
activate and pull the seat belt into tighter contact
against the occupant's body.
FEATURES OF YOUR HYUNDAI
1
29
NOTE:
o
Both the driver's and front passenger's
pre-tensioner seat belts will be activated
!
!
CAUTION:
WARNING:
in certain frontal collisions. The pre-
o
The sensor that activates the SRS airbag
o
Pre-tensioners are designed to operate
tensioner seat belts can be activated
is connected with the pre-tensioner seat
only one time. After activation, pre-
alone or, where the frontal collision is
belts. The SRS airbag warning light
AIR
on
tensioner seat belts must be replaced.
BAG
severe enough, together with the
the instrument panel will illuminate for
All seat belts, of any type, should always
airbags.
approximately 6 seconds after the igni-
be replaced after they have been worn
o
When the pre-tensioner seat belts are
tion key has been turned to the "ON"
during a collision.
activated, a loud noise may be heard and
position, and then it should turn off.
o
The pre-tensioner seat belt assembly
fine dust, which may appear to be smoke,
o
If the pre-tensioner seat belt is not work-
mechanisms become hot during activa-
may be visible in the passenger com-
ing properly, this warning light will illu-
tion. Do not touch the pre-tensioner seat
partment. These are normal operating
minate even if there is no malfunction of
belt assemblies for several minutes after
conditions and are not hazardous.
the SRS airbag system. If the SRS airbag
they have been activated.
o
Although it is harmless, the fine dust
warning light does not illuminate when
o
Do not attempt to inspect or replace the
may cause skin irritation and should not
the ignition key is turned to "ON" or if it
pre-tensioner seat belts yourself. This
be breathed for prolonged periods. Wash
remains illuminated after approximately
must be done by an authorized Hyundai
all exposed skin areas thoroughly after
6 seconds, or if it illuminates while the
dealer.
an accident in which the pre-tensioner
vehicle is being driven, please have an
o
Do not strike the pre-tensioner seat belt
seat belts were activated.
authorized Hyundai dealer inspect the
assemblies.
pre-tensioner seat belts and SRS airbag
o
Do not attempt to service or repair the
system as soon as possible.
pre-tensioner seat belt system in any
manner.
o
Improper handling of the pre-tensioner
seat belt assemblies, and failure to heed
the warnings to not strike, modify, in-
spect, replace, service or repair the pre-
tensioner seat belt assemblies may lead
to improper operation or inadvertent
activation and serious injury.
o
Always wear seat belts when driving or
riding in a motor vehicle.
1FEATURES OF YOUR HYUNDAI
30
SUPPLEMENTAL RESTRAINT (AIRBAG) SYSTEM
B240D01GK-GAT
(If Installed)
1. Driver's front airbag
2. Passenger's front airbag
3. Front side impact airbag
OGK036022
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст