Hyundai Tucson (2022 year). Manual in english — page 18
07
Reverse Parking Collision-Avoidance
WARNING
Assist may unnecessarily warn the driver
or assist with braking even if there are
Take the following precautions when
no pedestrians or objects under the
using Reverse Parking Collision-
following circumstances:
Avoidance Assist:
•
Any non-factory equipment or
•
Always pay extreme caution while
accessory is installed
driving. The driver is responsible for
controlling the brake for safe driving.
•
Your vehicle is unstable due to an
accident or other causes
•
Always pay attention to road and
traffic conditions while driving,
•
Bumper height or rear ultrasonic
whether or not there is a warning.
sensor installation has been modified
•
Always look around your vehicle to
•
Your vehicle height is low or high
make sure there are no pedestrians
due to heavy loads, abnormal tire
or objects before moving the vehicle.
pressure, etc.
•
The performance of Reverse Parking
•
Rear view camera or the rear
Collision-Avoidance Assist may
ultrasonic sensor(s) is stained with
vary under certain conditions. If
foreign material, such as snow, dirt,
vehicle speed is above 2 mph (4
etc.
km/h), Reverse Parking Collision-
•
The pattern on the road is mistaken
Avoidance Assist will provide
for a pedestrian
collision avoidance assist only when
•
There is shadow or light reflecting on
pedestrians are detected. Always
the ground
look around and pay attention when
backing up your vehicle.
•
Pedestrians or objects are around the
path of the vehicle
•
Some objects may not be detected
by the rear ultrasonic sensors due
•
Objects generating excessive
to the objects distance, size or
noise, such as vehicle horns, loud
material, all of which can limit the
motorcycle engines or truck air
effectiveness of the sensor.
brakes, are near your vehicle
•
Reverse Parking Collision-Avoidance
•
Your vehicle is backing towards a
Assist may not operate properly
narrow passage or parking space
or may operate unnecessarily
•
Your vehicle is backing towards an
depending on the road conditions
uneven road surface, such as an
and the surroundings.
unpaved road, gravel, bump, gradient,
•
Do not solely rely on Reverse Parking
etc.
Collision-Avoidance Assist. Doing
•
A trailer or carrier is installed on the
so may lead to vehicle damage or
rear of your vehicle
injuries.
•
An ultrasonic sensor with similar
frequency is near your vehicle
7-147
Driver assistance system
CAUTION
CAUTION
•
Noise may be heard when sudden
Take the following precautions to
braking occurs to avoid a collision.
maintain optimal performance of the
detecting sensors:
•
If any other warning sound such
as the seat belt warning chime is
•
Always keep the rear view camera
already generated, Reverse Parking
and rear ultrasonic sensors clean.
Collision-Avoidance Assist warning
•
Do not use any cleanser containing
may not sound.
acid or alkaline detergents when
•
Reverse Parking Collision-Avoidance
cleaning the rear view camera lens.
Assist may not work properly if the
Use only a mild soap or neutral
bumper has been damaged, replaced
detergent, and rinse thoroughly with
or repaired.
water.
•
Reverse Parking Collision-Avoidance
•
Do not spray the rear view camera or
Assist may not operate normally if
the rear ultrasonic sensors or their
interfered by strong electromagnetic
surrounding area directly with a
waves.
high pressure washer. It may cause
the rear view camera or the rear
•
Playing the vehicle audio system at
ultrasonic sensors to malfunction.
high volume may prevent passengers
from hearing Reverse Parking
•
Do not apply objects, such as a
Collision-Avoidance Assist warning
bumper sticker or a bumper guard,
sounds.
near the rear view camera or rear
ultrasonic sensors or apply paint to
•
Turn off Reverse Parking Collision-
the bumper. Doing so may adversely
Avoidance Assist when towing a
affect the performance of Reverse
trailer. If towing and moving in
Parking Collision-Avoidance Assist.
reverse, Reverse Parking Collision-
Avoidance Assist will activate as it
•
Never disassemble or strike the rear
detects the trailer.
view camera or the rear ultrasonic
sensors components.
•
Do not strike or pry the rear view
camera or the rear ultrasonic
sensors. Reverse Parking Collision-
Avoidance Assist may not operate
properly if the rear view camera
or the rear ultrasonic sensor(s)
is forcibly moved out of proper
alignment. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
Information
Reverse Parking Collision-Avoidance
Assist can detect a pedestrian or an object
when:
• A pedestrian is standing behind the
vehicle
• A large obstacle, such as a vehicle,
is parked in the rear center of your
vehicle
7-148
07
REMOTE SMART PARKING ASSIST (RSPA) (IF EQUIPPED)
Remote Smart Parking Assist uses
Detecting sensor
vehicle sensors to help the driver park
and exit parking spaces remotely from
outside the vehicle by controlling the
steering wheel, vehicle speed and
gearshifts.
Function
Description
Remotely moving forward/
backward
Remote
ONX4070068
Forward/
Backward
OJX1079037
• Remote Forward/Backward function
helps the driver move the vehicle
forward or Backward from outside the
vehicle using the smart key.
• When Remote Smart Parking Assist
operates, Surround View Monitor and
ONX4070069
Parking Distance Warning will also
[1] : Front ultrasonic sensors,
operate. For more details, refer to
[2] : Front side ultrasonic sensors,
“Surround View Monitor (SVM) and
[3] : Rear side ultrasonic sensors,
“Parking Distance Warning (PDW)”
[4] : Rear ultrasonic sensors
sections in chapter 7.
Refer to the picture above for the
detailed location of the detecting
sensors.
7-149
Driver assistance system
Remote Smart Parking Assist
CAUTION
Settings
Take the following precautions to
Setting features
maintain optimal performance of the
detecting sensors:
•
Never disassemble the detecting
sensor or sensor assembly, or apply
any impact on it.
•
If the detecting sensor have been
replaced or repaired, we recommend
that you have your vehicle inspected
by an authorized HYUNDAI dealer.
•
Remote Smart Parking Assist
may malfunction if the vehicle
bumper height or ultrasonic sensor
OTM070141N
installation has been modified
Warning Volume
or damaged. Any non-factory
installed equipment or accessories
With the engine on, select ‘Driver
may also interfere with the sensor
Assistance → Warning Volume’ from the
performance.
Settings menu to change the Warning
Volume to ‘High’, ‘Medium’ or ‘Low’ for
•
When the ultrasonic sensor is frozen
Forward Collision-Avoidance Assist.
or stained with snow, dirt, or water,
the sensor may be not operate until
If you change the Warning Volume,
the stains are removed using a soft
the Warning Volume of other Driver
cloth.
Assistance systems may change.
•
Do not push, scratch or strike the
ultrasonic sensor. Sensor damage
could occur.
•
Do not spray the ultrasonic sensors
or its surrounding area directly with
a high pressure washer.
7-150
07
Remote Smart Parking Assist Operation
Remote Smart Parking Assist button
Parking/View button
Smart key
ONX4070043
OTM070177
7-151
Driver assistance system
Location
Name
Symbol
Description
• Press and hold the Parking/View button to
Parking/View
turn on Remote Smart Parking Assist. Also,
button
Forward/Reverse Parking Distance warning will
Inside
automatically turn on.
vehicle
• Press the Parking Safety button while Remote
Parking
Smart Parking Assist is operating to end Remote
Safety button
Smart Parking Assist operation.
• Press the Remote Start button after the door is
locked with the engine off to start the engine
Remote Start
remotely.
button
• Press the Remote Start button while Remote
Forward/Reverse function is operating to end
Smart
function operation.
key
Forward
button
• When using the Remote Forward/Reverse
function, the vehicle moves in the direction of the
Backward
button while the button is pressed.
button
7-152
07
Remote Forward/Backward
Operating order
Remote Forward/Backward operates in
the following order:
1. Getting ready to remotely move
forward and backward
2. Remotely moving forward and
backward
1. Getting ready to remotely move forward
and in reverse
ONX4070076
There are two ways to operate Remote
Forward/Backward function.
OTM070223L
Method (2) Using the function with
engine on
OTM070178L
(1) Park the vehicle in front of the
Method (1) Using the function with
space where you want to use
engine off
Remote Forward/Backward
(1) Within a certain range from the
function, and shift the gear to P
vehicle press the door lock (
)
(Park).
button on the smart key and lock
(2) Press and hold the Parking/View
all doors.
(
) button to turn on Smart
(2) Press and hold the Remote Start
Parking Assist. A message ‘Under
button (
) within 4 seconds until
Remote Control’ will appear on the
the engine starts.
infotainment system screen.
(3) Get out of the vehicle with the
• For more details on remotely
smart key and close all doors.
starting the engine, refer to
“Remote Start” section in chapter 6.
• 'Agree' must be selected on the
infotainment system screen and the
Information
infotainment system has to operate
If the vehicle is remotely started that has
properly to use Remote Forward/
been parked in cold weather for a long
Backward function.
time, the operation of Remote Forward/
Backward function may be delayed
depending on the engine condition.
7-153
Driver assistance system
2. Remotely moving forward and
(4) When the driver gets in the vehicle
backward
with the smart key, a message
will appear informing the driver
Remote Forward/Backward
function is complete on the
infotainment system screen and
the engine will remain on.
In addition, when the Remote Start
(
) button is pressed on the smart
key from outside the vehicle, a
message will appear informing the
driver Remote Forward/Backward
function is complete and the
OTM070084L
engine will turn off.
(1)
Press and hold one of the Forward
(
) or Backward (
) button on
• Check that all smart keys are
the smart key. Remote Smart
outside the vehicle when using
Parking Assist will automatically
Remote Forward/Backward
control the steering wheel, vehicle
function.
speed and gearshift. The vehicle
• Remote Forward/Backward
will move in the direction of the
function will operate only when the
button pressed.
smart key is within 13 ft. (4 m) from
(2)
While Remote Forward/Backward
the vehicle. If there is no vehicle
function is operating, if you do
movement even when the Forward
not hold down the Forward (
) or
or Backward button is pressed on
Backward (
) button, the vehicle
the smart key, check the distance
will stop and function control
to the vehicle and press the button
will pause. The function will start
again.
operating again when the button is
• The detecting range of the smart
pressed and held again.
key may vary depending on the
(3)
When the vehicle reaches the
surroundings that are affected by
target location, release the smart
radio waves such as transmission
key Forward or Backward button.
tower, broadcast station, etc.
• When remotely moving forward
using method (1), it is recognized
as an exit situation, and the
vehicle moves 13 ft. (4 m) to
check for pedestrians, animals or
objects around the vehicle. After
confirmation, the steering wheel
is controlled according to the
condition ahead.
7-154
07
• When remotely moving forward
CAUTION
using method (2), it is recognized
as a parking situation, and will
•
When using Remote Remote
immediately control the steering
Forward/Backward function, make
wheel according to the condition
sure that all passengers have gotten
ahead to assist with entering the
out of the vehicle.
parking space and aligning the
•
If the vehicle’s battery is discharged
vehicle. However, performance
or Remote Smart Parking Assist
may reduce depending on the
malfunctions when parked in a
pedestrians, animals, shape of
narrow parking space, Remote
objects, location, etc. around the
Forward/Backward function will not
vehicle.
operate. Always park your vehicle in
• For moving remotely backward,
a space wide enough for you to get in
both method (1) and (2) aligns the
or out of your vehicle.
steering wheel first, and then will
•
Please note that depending on the
only move the vehicle straight.
parking space, you may not be able
• When remotely moving Forward/
to exit from the space you have
Backward is completed, the vehicle
entered by using Remote Forward/
will automatically shift to P (Park)
Backward function.
and engage EPB (Electronic Parking
•
After parking, the surrounding may
Brake).
change due to the movement of
surrounding vehicles. If this occurs,
Remote Forward/Backward function
may not operate.
•
Before leaving the vehicle, close
windows and sunroofs, and make
sure the engine is off before locking
the doors.
7-155
Driver assistance system
Remote Forward/Backward Parking
How to turn off Remote Forward/
function operation status
Backward function while operating
•
Press the Parking/View (
) button
Hazard
Operation
while the infotainment system screen
Smart key LED
warning
status
guides the driver using method 2.
light
•
Shift the gear except to P (Park)
Green LED
Under
while the infotainment system screen
continuously
-
control
guides the driver using method 2.
blinks
•
Press the Parking Safety (
) button
Red LED
or select ‘Cancel’ on the infotainment
Pause
continuously
Blinks
system screen.
blinks
•
Press the Remote Start (
) button
Red LED
Blinks 3
on the smart key while the vehicle
illuminates for
Off
times and
is being controlled by RRemote
4 seconds and
turns off
Forward/Backward function. Remote
then turns off
Forward/Backward function will turn
Green LED
off. At this time, the engine will turn
Blinks 1
illuminates for
off.
Complete
time and
4 seconds and
turns off
•
Get on the vehicle with the smart key.
then turns off
Remote Forward/Backward function
ÃÃ
Operation status by the hazard
will turn off. At this time, the engine
warning light may not be applicable
will remain on.
based on the regulation of your
country.
ÃÃ
If the smart key is not within the
operating range from the vehicle
(approximately 13 ft. (4 m)), the
smart key LED will not illuminate or
blink. Use the smart key within the
operating range.
7-156
07
The function will pause in the
The function will cancel in the
following conditions when:
following conditions when:
• There is a pedestrian, animal or object
•
The steering wheel is steered
in the direction the vehicle is moving
•
The gear is shifted while the vehicle is
• The door or liftgate is open
moving
• The Forward (
) or Backward (
)
•
Operating EPB while the vehicle is
button is not continuously pressed
moving
• Simultaneously pressing multiple
•
The engine hood is open
buttons on a smart key
•
The brake pedal or accelerator pedal
• The smart key is not operated within
is depressed when all the doors are
13 ft. (4 m) from the vehicle
closed
• Button of another smart key is pressed
•
The smart key is outside the vehicle
in addition to the operating smart key
when the brake pedal is depressed
while the driver's door is open
• Blind-Spot Collision-Avoidance
Assist or Rear Cross-Traffic Collision-
•
Rapid acceleration occurs
Avoidance Assist operates while the
•
Vehicle skid occurs
vehicle is being controlled in the
•
The wheel is stuck by an obstacle and
backward direction.
cannot move
• The vehicle moves 22 ft. (7 m)
•
There are pedestrians, animals or
while the smart key is pressed with
objects at the front and rear of the
Remote Forward/Backward function
vehicle at the same time
(maximum travel distance per button
press)
•
Approximately 3 minutes and 50
seconds have past after Remote
Forward/Backward function has
When Remote Forward/Backward
started to operate
function is paused, the vehicle will stop.
If the condition that made the function
•
The slope of the road exceeds the
to pause disappears, the function may
operational range
operate again.
•
The function is paused for more than
1 minute
•
The total travel distance of the vehicle
has exceeded 45 ft. (14 m) after
Remote Forward/Backward function
operation
7-157
Driver assistance system
• The steering wheel, gearshift, braking,
Remote Smart Parking Assist
and drive controls are not working
Malfunction and Limitations
normally
Remote Smart Parking Assist
• There is a problem with the smart key
malfunction
or the smart key battery is low
• ABS, TCS or ESC system operates due
to slippery road conditions
• The alarm of the Theft Alarm System
sounds
When Remote Forward/Backward
function is canceled, the vehicle will
automatically stop, shift the gear to
P (Park) and engage EPB (Electronic
Parking Brake).
OTM070222L
Remote Smart Parking Assist check
When Remote Smart Parking Assist is
not working properly, the ‘Check Parking
Assist’ warning message will appear
on the infotainment system screen.
If the message appears, stop using
Remote Smart Parking Assist, and have
the vehicle inspected by an authorized
HYUNDAI dealer.
7-158
07
Limitations of Remote Smart Parking
Assist
In the following circumstances, Remote
Smart Parking Assist performance to
park or exit the vehicle may be limited,
there may be a risk of collision, or
Remote Smart Parking Assist may turn
off. Park or exit the vehicle manually if
necessary.
•
An object is attached to the steering
wheel
OJX1079200L
Remote Smart Parking Assist canceled
•
The vehicle is installed with a snow
chain, spare tire or different size
When Remote Parking Assist is
wheel
operating, the function can be canceled,
•
Tire pressure is lower or higher than
and the ‘Parking Assist Canceled’
warning message may appear regardless
the standard tire pressure
of the parking order. Other messages
•
Your vehicle is loaded with cargo
may appear depending on the situations.
longer or wider than your vehicle or a
Follow the instructions provided on
trailer is connected to your vehicle
the infotainment system screen while
•
There is a problem with the wheel
parking your vehicle with Remote
alignment
Parking Assist. Always look around and
•
Your vehicle is leaned severely to one
pay attention when using Remote Smart
side
Parking Assist.
•
Your vehicle is equipped with a trailer
hitch
•
The license plate is installed
differently from the original location
•
There is a person, animal or object
above or below the ultrasonic sensor
when Remote Smart Parking Assist is
activated
•
The parking space is curved or
diagonal
•
There is an obstacle such as a person,
OTM070221L
animal or object (trash can, bicycle,
Remote Smart Parking Assist standby
motorcycle, shopping cart, narrow
pillar etc.) near the parking space
When ‘Parking Assist Conditions Not
Met’ message appears, when Parking/
View (
) button has been pressed and
held, Remote Smart Parking Assist is in
standby. After a while, press and hold the
Parking/View (
) button again to see if
Remote Smart Parking Assist works.
The message appears even when the
smart key's battery is low. Check the
smart key battery level.
7-159
Driver assistance system
•
There is a circular pillar or narrow
Remote Smart Parking Assist may not
pillar, or a pillar surrounded by objects
operate normally under the following
such as fire extinguisher, etc. near the
circumstances:
parking space
•
Parking on inclines
•
The road surface is bumpy (curbstone,
speed bump, etc.)
•
The road is slippery
•
The parking space is near a vehicle
with higher ground clearance or big,
such as a truck, etc.
•
The parking space is Inclined
•
There is heavy wind
•
Operating Remote Smart Parking
Assist on uneven roads, gravel roads,
bushes, etc.
ONX4070070
•
The performance of the ultrasonic
Park manually when parking on
sensor is affected by extremely hot or
inclines.
cold weather
•
The ultrasonic sensor is covered with
•
Parking on uneven road
snow or water
•
An object that generates ultrasonic
waves is nearby
•
A wireless device with a transmission
function operates near the ultrasonic
sensors
•
Your vehicle is affected by another
vehicle’s Parking Distance Warning
•
The sensor is mounted or positioned
incorrectly by an impact to the
bumper
ONX4070071
•
When the ultrasonic sensor cannot
Remote Smart Parking Assist may
detect the following objects:
cancel when the vehicle slips, or
--
Sharp or slim objects, such as ropes,
the vehicle cannot move due to
chains or small poles
road conditions such as pebbles or
fragmented stones.
--
Objects smaller than 40 in. (100 cm)
in length and narrower than 6 in. (14
cm) in diameter
--
Objects which tend to absorb
sensor frequency, such as clothes,
spongy material or snow
7-160
07
• Parking behind a truck
• Parking in a parking space with a
vehicle on one side only
ONX4070072
OJX1079049
Do not use Remote Smart Parking
Assist around vehicles with higher
If Remote Smart Parking Assist is
ground clearance, such as a bus,
used, when parking in a parking space
truck, etc. It may lead to an accident.
with a vehicle only on one side, your
vehicle may cross the parking line to
• Parking near a pillar
avoid the parked vehicle.
• Parking diagonal
ONX4070073
Remote Smart Parking Assist
OTM070133
performance may reduce when there
is a pillar or pillar surrounded by
Remote Smart Parking Assist does not
objects such as a fire extinguisher
provide diagonal parking. Even if your
near the parking space.
vehicle was able to enter the parking
space, do not use Remote Smart
Parking Assist because the function
cannot operate normally.
7-161
Driver assistance system
• Parking in snow
•
Do not use Remote Smart Parking
Assist when under the influence of
alcohol.
•
Do not let children or other people to
use the smart key.
•
If Remote Smart Parking Assist is
used continuously for a long period,
it may adversely affect Remote
Smart Parking Assist performance.
•
Remote Smart Parking Assist may not
operate normally if the vehicle needs
wheel alignment adjustment such
ONX4070074
as when the vehicle tilts to one side.
Snow may interfere with sensor
Have the vehicle inspected by an
operation, or Remote Smart Parking
authorized HYUNDAI dealer.
Assist may cancel if the road is
•
Noise may be heard when braking
slippery while parking.
occurs by Remote Smart Parking
Assist or when the brake pedal is
WARNING
depressed by the driver.
•
Remote Smart Parking Assist may
Take the following precautions when
suddenly apply the brake to avoid
using Remote Smart Parking Assist:
collision.
• The driver is responsible for safe
•
Use Remote Smart Parking Assist
parking and exit when using Remote
only in a parking space that is large
Smart Parking Assist. Make sure
enough for the vehicle to move
there are no pedestrians, animals
safely.
or objects around the vehicle when
using Remote Smart Parking Assist.
• When using Remote Smart Parking
NOTICE
Assist, stay out of the way in the
• If the 3rd stage warning (continuous
direction the vehicle moves for your
beep) of the Forward/Backward
safety.
Parking Distance Warning sounds
• Always check surroundings when
while Remote Smart Parking
using Remote Smart Parking Assist.
Assist is operating, it means the
You may collide with pedestrians,
obstacle detected is close to your
animals, or objects if they are near
vehicle. At this time, Remote Smart
the sensor or are in the sensor’s blind
Parking Assist will temporarily stop
spot area.
operating. Make sure there are no
pedestrians, animals, or objects
• A collision may occur if a pedestrian,
around your vehicle.
animal, or object suddenly appears
while Remote Smart Parking Assist is
• Depending on brake operation, the
operating.
stop lights may come on while the
vehicle is moving.
7-162
07
DECLARATION OF CONFORMITY
Front Radar
Rear Corner Radar
The radio frequency components (Front
The radio frequency components (Rear
Radar) complies :
Corner Radar) complies:
OANATEL124
OANATEL275
7-163
8.Emergency situations
Hazard warning flasher
8-2
In case of an emergency while driving
8-2
If the engine stalls while driving
8-2
If the engine stalls at a crossroad or crossing
8-2
If you have a flat tire while driving
8-3
If the engine will not start
8-3
Jump starting
8-4
If the engine overheats
8-7
Tire Pressure Monitoring System (TPMS)
8-9
Check tire pressure
8-9
Tire pressure monitoring system
8-10
Low tire pressure warning light
8-11
Low tire pressure position and tire pressure telltale
8-11
TPMS malfunction indicator
8-12
Changing a tire with TPMS
8-12
If you have a flat tire (equipped with spare tire)
8-14
Jack and tools
8-14
Changing tires
8-15
Jack label
8-20
Towing
8-21
Towing service
8-21
Removable towing hook
8-22
Emergency towing
8-23
8
Emergency situations
HAZARD WARNING
IN CASE OF AN EMERGENCY
FLASHER
WHILE DRIVING
If the engine stalls while driving
• Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
• Turn on your hazard warning flasher.
• Try to start the engine again. If your
vehicle will not start, we recommend
that you contact an authorized
HYUNDAI dealer or seek other
qualified assistance.
ONX4080001
The hazard warning flasher serves as
If the engine stalls at a crossroad
a warning to other drivers to exercise
or crossing
extreme caution when approaching,
overtaking, or passing your vehicle.
If the engine stalls at a crossroads or
crossing, if safe to do so, shift the gear to
It should be used whenever emergency
N (Neutral) and then push the vehicle to
repairs are being made or when the
a safe location.
vehicle is stopped near the edge of a
roadway.
To turn the hazard warning flasher on
or off, press the hazard warning flasher
button with the Engine Start/Stop button
in any position. The hazard warning
flasher button is located in the center
fascia panel. All turn signal lights will
flash simultaneously.
• The hazard warning flasher operates
regardless of whether your vehicle is
running or not.
• The turn signals do not work when the
hazard flasher is on.
8-2
08
IF THE ENGINE WILL NOT
If you have a flat tire while
START
driving
• Be sure to shift the gear to N (Neutral)
If a tire goes flat while you are driving:
or P (Park). The engine starts only
when the gear is in N (Neutral) or P
•
Take your foot off the accelerator
(Park).
pedal and let the vehicle slow down
while driving straight ahead. Do not
• Turn on the interior light. If the light
apply the brakes immediately or
dims or goes out when you operate
attempt to pull off the road as this
the starter, the battery is drained.
may cause loss of vehicle control
See instructions for “Jump Starting”
resulting in an accident. When the
provided in this chapter.
vehicle has slowed to such a speed
• Check the fuel level and add fuel if
that it is safe to do so, brake carefully
necessary.
and pull off the road. Drive off the
If the vehicle still does not start, we
road as far as possible and park on
firm, level ground. If you are on a
recommend that you call an authorized
HYUNDAI dealer for assistance.
divided highway, do not park in the
median area between the two traffic
lanes.
NOTICE
•
When the vehicle is stopped, press the
Push or pull starting the vehicle may
hazard warning flasher button, shift
cause the catalytic converter to
the gear to P (Park), apply the parking
overload which can lead to damage to
brake, and press the Engine Start/Stop
the emission control system.
button to the OFF position.
•
Have all passengers get out of the
vehicle. Be sure they all get out on the
side of the vehicle that is away from
traffic.
•
When changing a flat tire, follow the
instructions provided later in this
chapter.
8-3
Emergency situations
JUMP STARTING
Jump starting can be dangerous if done
If acid gets into your eyes, flush your
incorrectly. Follow the jump starting
eyes with clean water for at least 15
procedure in this section to avoid serious
minutes and get immediate medical
injury or damage to your vehicle. If in
attention. If acid gets on your skin,
doubt about how to properly jump start
thoroughly wash the area. If you feel
your vehicle, we strongly recommend
pain or a burning sensation, get medical
that you have a service technician or
attention immediately.
towing service do it for you.
•
When lifting a plastic-cased battery,
excessive pressure on the case may
cause battery acid to leak. Lift with a
WARNING
battery carrier or with your hands on
To prevent SERIOUS INJURY or DEATH
opposite corners.
to you or bystanders, always follow
•
Do not attempt to jump start your
these precautions when working near
vehicle if your battery is frozen.
or handling the battery:
•
NEVER attempt to recharge the
Always read and follow
battery when the vehicle’s battery
instructions carefully when
cables are connected to the battery.
handling a battery.
•
The electrical ignition system works
with high voltage.
Wear eye protection designed
NEVER touch these components
to protect the eyes from acid
with the engine running or when the
splashes.
Engine Start/Stop button is in the ON
position.
Keep all flames, sparks, or
smoking materials away from
the battery.
Hydrogen is always present
in battery cells, is highly
combustible, and may explode
if ignited.
Keep batteries out of reach of
children.
Batteries contain sulfuric acid
which is highly corrosive. Do
not allow acid to contact your
eyes, skin or clothing.
8-4
08
Jump starting procedure
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the engine compartment.
1.
Position the vehicles close enough
that the jumper cables will reach, but
ONX4080003
do not allow the vehicles to touch.
5.
Connect the jumper cables in
2.
Avoid fans or any moving parts in the
the exact sequence shown in the
engine compartment at all times, even
illustration. First connect one jumper
when the vehicles are turned off.
cable to the red, positive (+) jumper
3.
Turn off all electrical devices such as
terminal of your vehicle (1).
radios, lights, air conditioning, etc.
6. Connect the other end of the jumper
Put the vehicles in P (Park) and set the
cable to the red, positive (+) battery/
parking brake. Turn both vehicles OFF.
jumper terminal of the assisting
4.
Open the engine hood.
vehicle (2).
7.
Connect the second jumper cable to
the black, negative (-) battery/ chassis
ground of the assisting vehicle (3).
8. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
8-5
Emergency situations
9. Start the engine of the assisting
Information
vehicle and let it run at approximately
2,000 RPM for a few minutes. Then
An inappropriately disposed
start your vehicle.
battery can be harmful to
the environment and human
10. Keep your vehicle operating for at
health. Dispose of the battery
least 30 minutes at idle or driving to
according to your local law(s) or
assure your battery receives enough
regulations.
charge to be able to start on its
own after the vehicle is shut off. A
complete dead battery may require
NOTICE
as long as 60 minutes runtime to fully
To prevent damage to your vehicle:
recharge it. If vehicle is run for less,
•
Only use a 12-volt power supply
the battery may not restart.
(battery or jumper system) to jump
If your vehicle will not start after a
start your vehicle.
few attempts, it probably requires
•
Do not attempt to jump start your
servicing. In this event please seek
vehicle by push-starting.
qualified assistance. If the cause of your
battery discharging is not apparent, we
recommend that you have your vehicle
checked by an authorized HYUNDAI
dealer.
Disconnect the jumper cables in the
exact reverse order you connected them:
1. Disconnect the jumper cable from the
black, negative (-) chassis ground of
your vehicle (4).
2. Disconnect the other end of the
jumper cable from the black, negative
(-) battery/chassis ground of the
assisting vehicle (3).
3. Disconnect the second jumper cable
from the red, positive (+) battery/
jumper terminal of the assisting
vehicle (2).
4. Disconnect the other end of the
jumper cable from the red, positive (+)
jumper terminal of your vehicle (1).
8-6
08
IF THE ENGINE OVERHEATS
If your temperature gauge indicates
4. Check for coolant leaking from the
overheating, you experience a loss of
radiator, hoses or under the vehicle. (If
power, or hear loud pinging or knocking,
the air conditioning had been in use, it
the engine may be overheating. If this
is normal for cold water to be draining
happens, you should:
from it when you stop.)
1.
Pull off the road and stop as soon as it
5. If engine coolant is leaking out, stop
is safe to do so.
the engine immediately and call the
nearest authorized HYUNDAI dealer
2.
Shift the gear to P (Park) and set the
for assistance.
parking brake. If the air conditioning is
ON, turn it OFF.
3.
If engine coolant is running out under
WARNING
the vehicle or steam is coming out
Never remove the engine
from the hood, stop the engine. Do
coolant cap and/or water-
not open the hood until the coolant
cooled intercooler coolant
has stopped running or the steaming
cap or the drain plug while the
has stopped. If there is no visible
engine and radiator are hot.
loss of engine coolant and no steam,
leave the engine running and check
Hot coolant and steam may blow out
to be sure the engine cooling fan is
under pressure, causing serious injury.
operating. If the fan is not running,
Turn the engine off and wait until the
turn the engine off.
engine cools down. Use extreme care
when removing the coolant cap. Wrap
a thick towel around it, and turn it
WARNING
counterclockwise slowly to the first
While the engine is running,
stop. Step back while the pressure is
keep hands, clothing and tools
released from the cooling system. When
away from the moving parts
you are sure all the pressure has been
such as the cooling fan and
released, press down on the cap, using
drive belt to prevent serious
a thick towel, and continue turning
injury.
counterclockwise to remove it.
8-7
Emergency situations
6. If you cannot find the cause of the
CAUTION
overheating, wait until the engine
temperature has returned to normal.
• Serious loss of coolant indicates a
Then, if coolant has been lost,
leak in the cooling system and we
carefully add coolant to the reservoir
recommend the system be checked
to bring the fluid level in the reservoir
by an authorized HYUNDAI dealer.
up to the halfway mark.
• When the engine overheats from
7. Proceed with caution, keeping alert
low engine coolant, suddenly adding
for further signs of overheating.
engine coolant may cause cracks
If overheating happens again,
in the engine. To prevent damage,
we recommend that you call an
add engine coolant slowly in small
authorized HYUNDAI dealer for
quantities. It may require several
assistance.
refilling cycles to properly fill the
engine cooling system. If necessary,
an authorized HYUNDAI dealer
should be consulted to perform this
task.
8-8
08
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Check tire pressure
ONX4080004
ONX4E040019
•
You can check the tire pressure in the
Warning mode on the cluster.
Refer to the “LCD Display Modes” in
chapter 4.
•
Tire pressure is displayed after a few
minutes of driving after initial engine
start up.
•
If tire pressure is not displayed when
the vehicle is stopped, “Drive to
ONX4E080005
display” message will appear. After
(1)
Low Tire Pressure Telltale/TPMS
driving, check the tire pressure.
Malfunction Indicator
•
The displayed tire pressure values may
(2)
Low Tire Pressure Position Telltale
differ from those measured with a tire
and Tire Pressure Telltale (Shown on
pressure gauge.
the LCD display)
•
You can change the tire pressure unit
in the User Settings mode on the
instrument cluster.
--
psi, kpa, bar (Refer to “LCD Modes”
in chapter 4).
8-9
Emergency situations
Tire pressure monitoring system
Your vehicle has also been equipped with
a TPMS malfunction indicator to indicate
when the system is not operating
WARNING
properly. The TPMS malfunction
indicator is combined with the low
Over-inflation or under-inflation can
tire pressure telltale. When the system
reduce tire life, adversely affect vehicle
detects a malfunction, the telltale will
handling, and lead to sudden tire failure
flash for approximately one minute and
that may cause loss of vehicle control
then remain continuously illuminated.
resulting in an accident.
This sequence will continue upon
subsequent vehicle start-ups as long as
Each tire, including the spare (if
the malfunction exists.
provided), should be checked monthly
When the malfunction indicator is
when cold and inflated to the inflation
pressure recommended by the vehicle
illuminated, the system may not be able
to detect or signal low tire pressure as
manufacturer on the vehicle placard
or tire inflation pressure label. (If your
telltale. TPMS malfunctions may occur
for a variety of reasons, including the
vehicle has tires of a different size than
the size indicated on the vehicle placard
installation of replacement or alternate
tires or wheels on the vehicle that
or tire inflation pressure label, you should
determine the proper tire inflation
prevent the TPMS from functioning
properly.
pressure for those tires.)
Always check the TPMS malfunction
As an added safety feature, your
vehicle has been equipped with a tire
telltale after replacing one or more tires
or wheels on your vehicle to ensure that
pressure monitoring system (TPMS)
that illuminates a low tire pressure
the replacement or alternate tires and
wheels allow the TPMS to continue to
telltale when one or more of your tires is
significantly under-inflated. Accordingly,
function properly.
when the low tire pressure telltale
illuminates, you should stop and check
NOTICE
your tires as soon as possible, and inflate
If any of the below happens, we
them to the proper pressure. Driving on
recommend that you have the system
a significantly under-inflated tire causes
checked by an authorized HYUNDAI
the tire to overheat and can lead to tire
dealer.
failure.
1. The Low Tire Pressure Telltale/ TPMS
Under-inflation also reduces fuel
Malfunction Indicator does not
efficiency and tire tread life, and may
illuminate for 3 seconds when the
affect the vehicle’s handling and
Engine Start/Stop button is pressed
stopping ability.
to the ON position or when the
Please note that the TPMS is not a
engine is running.
substitute for proper tire maintenance,
2. The TPMS Malfunction Indicator
and it is the driver’s responsibility to
remains illuminated after blinking for
maintain correct tire pressure, even if
approximately 1 minute.
under-inflation has not reached the level
to trigger illumination of the TPMS low
3. The Low Tire Pressure Position
tire pressure telltale.
Telltale remains illuminated.
8-10
08
Low tire pressure
If you cannot reach a service station or
warning light
if the tire cannot hold the newly added
air, replace the low pressure tire with the
spare tire.
Low tire pressure position and
The Low Tire Pressure Telltale will remain
tire pressure telltale
on and the TPMS Malfunction Indicator
may blink for one minute and then
remain illuminated (when the vehicle
is driven approximately 10 minutes at
speed above 15.5 mph (25 km/h)) until
you have the low pressure tire repaired
and replaced on the vehicle.
CAUTION
In winter or cold weather, the Low Tire
Pressure Telltale may be illuminated if
the tire pressure was adjusted to the
ONX4E040019
recommended tire inflation pressure
When the tire pressure monitoring
in warm weather. It does not mean
system warning indicators are
your TPMS is malfunctioning because
illuminated and a warning message
the decreased temperature leads to a
displayed on the cluster LCD display,
proportional lowering of tire pressure.
one or more of your tires is significantly
When you drive your vehicle from a
under-inflated. The Low Tire Pressure
warm area to a cold area or from a cold
Position Telltale will indicate which
area to a warm area, or the outside
tire is significantly underinflated by
temperature is greatly higher or lower,
illuminating the corresponding position
you should check the tire inflation
light.
pressure and adjust the tires to the
If either telltale illuminates, immediately
recommended tire inflation pressure.
reduce your speed, avoid hard cornering
and anticipate increased stopping
distances. You should stop and check
WARNING
your tires as soon as possible. Inflate the
Low pressure damage
tires to the proper pressure as indicated
on the vehicle’s placard or tire inflation
Significantly low tire pressure makes
pressure label located on the driver’s
the vehicle unstable and can contribute
side center pillar outer panel.
to loss of vehicle control and increased
braking distances.
Continued driving on low pressure tires
can cause the tires to overheat and fail.
8-11
Emergency situations
TPMS malfunction
Changing a tire with TPMS
indicator
If you have a flat tire, the Low Tire
Pressure and Position telltales will come
The TPMS Malfunction Indicator
on. We recommend that you have the flat
will illuminate after it blinks for
tire repaired by an authorized HYUNDAI
approximately one minute when there
dealer as soon as possible or replace the
is a problem with the Tire Pressure
flat tire with the spare tire.
Monitoring System.
We recommend that you have the
NOTICE
system checked by an authorized
It is recommended that you do not
HYUNDAI dealer as soon as possible.
use a puncture-repairing agent not
approved by HYUNDAI dealer or the
NOTICE
equivalent specified for your vehicle to
If there is a malfunction with the
repair and/or inflate a low pressure tire.
Tire sealant not approved by HYUNDAI
TPMS, the individual tire pressures
in the cluster LCD display will not be
dealer or the equivalent specified for
your vehicle may damage the tire
available. Have the system checked by
an authorized HYUNDAI dealer as soon
pressure sensor.
as possible.
The spare tire (if equipped) does not
come with a tire pressure monitoring
NOTICE
sensor. When the low pressure tire or
The TPMS Malfunction Indicator may
the flat tire is replaced with the spare
illuminate after blinking for one minute
tire, the Low Tire Pressure Telltale will
if the vehicle is near electric power
remain on. Also, the TPMS Malfunction
supply cables or radio transmitters
Indicator will illuminate after blinking
such as police stations, government
for one minute if the vehicle is driven
and public offices, broadcasting
at speed above 15.5 mph (25 km/h) for
stations, military installations, airports,
approximately 10 minutes.
transmitting towers, etc.
Once the original wheel equipped with
Additionally, the TPMS Malfunction
a tire pressure monitoring sensor is
Indicator may illuminate if snow chains
reinflated to the recommended pressure
are used or electronic devices such as
and reinstalled on the vehicle, the
computers, chargers, remote starters,
Low Tire Pressure Telltale and TPMS
navigation, etc. This may interfere with
Malfunction Indicator will go off within a
normal operation of the TPMS.
few minutes of driving.
8-12
08
If the indicators do not extinguish after a
WARNING
few minutes, please visit an authorized
HYUNDAI dealer.
Tampering with, modifying, or disabling
the Tire Pressure Monitoring System
Each wheel is equipped with a tire
(TPMS) components may interfere
pressure sensor mounted inside the tire
with the system’s ability to warn the
behind the valve stem (except for the
driver of low tire pressure conditions
spare tire). You must use TPMS specific
and/or TPMS malfunctions. Tampering
wheels. It is recommended that you
with, modifying, or disabling the Tire
always have your tires serviced by an
Pressure Monitoring System (TPMS)
authorized HYUNDAI dealer.
components may void the warranty for
You may not be able to identify a tire
that portion of the vehicle.
with low pressure by simply looking at it.
Always use a good quality tire pressure
gauge to measure. Please note that a tire
Information
that is hot (from being driven) will have a
This device complies with Part 15 of the
higher pressure measurement than a tire
FCC rules.
that is cold.
Operation is subject to the following three
A cold tire means the vehicle has been
conditions:
sitting for 3 hours and driven for less
than 1 mile (1.6 km) in that 3 hour period.
1. This device may not cause harmful
interference.
Allow the tire to cool before measuring
2. This device must accept any
the inflation pressure. Always be sure
interference received, including
the tire is cold before inflating to the
interference that may cause undesired
recommended pressure.
operation.
3. Changes or modifications not expressly
WARNING
approved by the party responsible
• The TPMS cannot alert you to severe
for compliance could void the user’s
and sudden tire damage caused by
authority to operate the equipment.
external factors such as nails or road
debris.
• If you feel any vehicle instability,
immediately take your foot off
the accelerator, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.
8-13
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст