Hyundai Tucson (2022 year). Manual in english — page 4
03
• NEVER lean on the door or center console or sit on
one side of the front passenger seat.
OHI038158
• Do not sit on the passenger seat wearing heavily
padded clothes such as ski wear and hip protector.
OJX1039069
• Do not use car seat accessories such as thick blankets
and cushions which cover up the car seat surface.
OJX1039070
• Do not place electronic devices such as laptops, DVD
player, or conductive materials such as water bottles
on the passenger seat.
• Do not use electronic devices such as laptops and
satellite radios which use inverter chargers.
OJX1039071
• If large quantity of liquid has been spilled on the
passenger seat, the air bag warning light may
illuminate or malfunction.
Therefore, make sure the seat has been completely
dried before driving the vehicle.
OJX1039072
•
Do not place sharp objects on the front passenger seat. These may damage the
occupant detection system, if they puncture the seat cushion.
•
Do not place any items under the front passenger seat.
•
When changing or replacing the seat or seat cover, use original items only.
The OCS has been developed based on using original HYUNDAI car seats only.
Altering or changing the authentic parts may result in system malfunction and
increase risk of injury when in collision. Any of the above could interfere with the
proper operation of the OCS sensor thereby increasing the risk of an injury in an
accident.
3-59
Seats & Safety System
WARNING
NEVER allow an adult passenger to ride
in the front passenger seat when the
“PASSENGER AIR BAG OFF” indicator
is illuminated. During a collision, the
air bag will not inflate if the indicator
is illuminated. Have your passenger
reposition themselves in the seat. If the
“PASSENGER AIR BAG OFF” indicator
remains illuminated after the passenger
repositions themselves properly
OHI038118
and the vehicle is restarted, have
Proper seated position for OCS
the passenger move to the rear seat
If the “PASSENGER AIR BAG OFF”
because the air bag will not inflate.
indicator is on when an adult is seated
in the front passenger seat, place the
NOTICE
Engine Start/Stop button in the OFF
position and ask the passenger to sit
The “PASSENGER AIR BAG OFF”
properly (sitting upright with the seat
indicator generally illuminates for
back in an upright position, centered
approximately 4 seconds after the
on the seat cushion with their seat belt
Engine Start/Stop button is in the ON
on, legs comfortably extended and their
or START position. But, if the Engine
feet on the floor). Restart the engine and
START/STOP button is pressed to the
have the person remain in that position.
ON or START position within 3 minutes
This will allow the system to detect the
after the engine is turned OFF, the
person and to enable the passenger air
indicator does not illuminate. If the
bag. If the “PASSENGER AIR BAG OFF”
front passenger seat is occupied,
indicator is still on, ask the passenger to
the OCS will then classify the front
move to the rear seat.
passenger after several more seconds.
3-60
03
Do not install a Child Restraint
Why didn’t my air bag go off in a
System on the Front Passenger’s
collision?
Seat
There are certain types of accidents in
which the air bag would not be expected
to provide additional protection. These
include rear impacts, second or third
collisions in multiple impact accidents,
as well as low speed impacts. Damage to
the vehicle indicates a collision energy
absorption, and is not an indicator of
whether or not an air bag should have
inflated.
Air bag collision sensors
OHI039193N
Even though your vehicle is equipped
WARNING
with the OCS, never install a child
To reduce the risk of an air bag
restraint in the front passenger’s seat.
deploying unexpectedly and causing
An inflating air bag can forcefully strike a
serious injury or death:
child or child restraint resulting in serious
•
Do not hit or allow any objects to
or fatal injury.
impact the locations where air bags
or sensors are installed.
WARNING
•
Do not perform maintenance on or
NEVER use a rearward facing Child
around the air bag sensors. If the
location or angle of the sensors is
Restraint on a seat protected by an
ACTIVE AIRBAG in front of it, DEATH
altered, the air bags may deploy
when they should not or may not
or SERIOUS INJURY to the CHILD can
occur.
deploy when they should.
•
Installing bumper guards with non-
genuine Hyundai or non-equivalent
parts may adversely affect the
collision and airbag deployment
performance.
•
Press the Engine Start/Stop button to
the OFF or ACC position and wait for
3 minutes when the vehicle is being
towed to prevent inadvertent air bag
deployment.
•
We recommend that all air bag
repairs are conducted by an
authorized HYUNDAI dealer.
3-61
Seats & Safety System
ONX4030041/ONX4030042/ONX4030056/ONX4030044/ONX4030043/ONX4030045
1. SRS control module / Rollover sensor
4. Side impact sensor (Acceleration)
2. Front impact sensor
5. Side impact sensor (Acceleration)
3. Side impact sensor (Pressure)
3-62
03
Air bag inflation conditions
Side and curtain air bags
Side and curtain air bags are designed
to inflate when an impact is detected
by side collision sensors depending on
the severity, speed or angles of impact
resulting from a side impact collision.
Although the driver’s and front
passenger’s air bags are designed to
inflate in frontal collisions, they also may
inflate in other types of collisions if the
front impact sensors detect a sufficient
impact. Side and curtain air bags are
ONX4030046
designed to inflate in side impact
collisions, but they may inflate in other
Front air bags
collisions if the side impact sensors
Front air bags are designed to inflate
detect a sufficient impact.
in a frontal collision depending on the
Also, the side and curtain air bags are
severity of impact of the front collision.
designed to inflate when a rollover
is detected by a rollover sensor. (if
equipped with rollover sensor)
If the vehicle chassis is impacted by
bumps or objects on unimproved roads,
the air bags may deploy. Drive carefully
on unimproved roads or on surfaces not
designed for vehicle traffic to prevent
unintended air bag deployment.
ONX4030050
OTM030033
3-63
Seats & Safety System
Air bag non-inflation conditions
ONX4030049
ONX4030047
Front air bags may not inflate in side
impact collisions, because occupants
In certain low-speed collisions the air
move in the direction of the collision,
bags may not deploy. The air bags are
and thus in side impacts, front air bag
designed not to deploy in such cases
deployment would not provide additional
because they may not provide benefits
occupant protection.
beyond the protection of the seat belts.
However, side and curtain air bags
and front center air bag may inflate
depending on the severity of impact.
ONX4030048
Front air bags are not designed to inflate
in rear collisions, because occupants
OTM030034
are moved backward by the force of the
impact. In this case, inflated air bags
In an angled collision, the force of impact
would not provide any additional benefit.
may direct the occupants in a direction
where the air bags would not be able to
provide any additional benefit, and thus
the sensors may not deploy any air bags.
3-64
03
ONX4030051
ONX4030052
Just before impact, drivers often brake
Air bags may not inflate if the vehicle
heavily. Such heavy braking lowers the
collides with objects such as utility poles
front portion of the vehicle causing it
or trees, where the point of impact is
to “ride” under a vehicle with a higher
concentrated and the collision energy is
ground clearance. Air bags may not
absorbed by the vehicle structure.
inflate in this “underride” situation
because deceleration forces that are
detected by sensors may be significantly
reduced by such “underride” collisions.
ONX4030053
Front air bags may not inflate in
rollover accidents because front air bag
deployment would not provide additional
occupant protection.
However, the side and curtain air bags
and front center air bag may inflate in a
rollover situation, when it is detected by
the rollover sensor.
3-65
Seats & Safety System
SRS care
WARNING
The SRS is virtually maintenance-free
To reduce the risk of serious injury or
and there are no parts you can safely
death take the following precautions:
service by yourself. If the SRS air bag
•
Do not attempt to modify or
warning light does not illuminate when
disconnect the SRS components or
the Engine Start/Stop button is in the
wiring, including the addition of any
ON position, or continuously remains
kind of badges to the pad covers or
on, we recommend that the system be
modifications to the body structure.
immediately inspected by an authorized
HYUNDAI dealer.
•
Do not place objects over or near
the air bag modules on the steering
We recommend any work on the SRS
wheel, instrument panel, and the
system, such as removing, installing,
front passenger’s panel above the
repairing, or any work on the steering
glove box.
wheel, the front passenger’s panel, front
seats and roof rails be performed by an
•
Clean the air bag pad covers with
authorized HYUNDAI dealer. Improper
a soft cloth moistened with plain
handling of the SRS system may result in
water. Solvents or cleaners could
serious personal injury.
adversely affect the air bag covers
and proper deployment of the
system.
•
We recommend that inflated air
bags be replaced by an authorized
HYUNDAI dealer.
•
If components of the air bag system
must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed.
We recommend that you consult
an authorized HYUNDAI dealer for
the necessary information. Failure
to follow these precautions could
increase the risk of personal injury.
3-66
03
Additional safety precautions
Air bag warning labels
Passengers should not move out of
or change seats while the vehicle is
moving. A passenger who is not wearing
a seat belt during a crash or emergency
stop can be thrown against the inside of
the vehicle, against other occupants, or
be ejected from the vehicle.
Do not use any accessories on seat
belts. Devices claiming to improve
occupant comfort or reposition the seat
belt can reduce the protection provided
by the seat belt and increase the chance
ONX4030058N
of serious injury in a crash.
Air bag warning labels, required by the
Do not modify the front seats.
U.S. National Highway Traffic Safety
Modification of the front seats could
Administration (NHTSA), are attached
interfere with the operation of the
to alert the driver and passengers of
supplemental restraint system sensing
potential risks of the air bag system. Be
components or side air bags.
sure to read all of the information about
the air bags that are installed on your
Do not place items under the front
vehicle in this Owners Manual.
seats. Placing items under the front seats
could interfere with the operation of the
supplemental restraint system sensing
components and wiring harnesses.
Do not cause impact to the doors.
Impact to the doors when the Engine
Start/Stop button is in the ON or START
position may cause the air bags to
inflate.
Modifications to accommodate
disabilities. If you require modification
to your vehicle to accommodate
a disability, contact the HYUNDAI
Customer Connect Center at 800-633-
5151.
Adding equipment to or modifying
your air bag equipped vehicle
If you modify your vehicle by changing
your vehicle’s frame, bumper system,
front end or side sheet metal or ride
height, this may affect the operation of
your vehicle’s air bag system.
3-67
4.Instrument cluster
Instrument cluster
4-4
Instrument cluster control
4-5
Instrument panel illumination
4-5
Gauges and meters
4-5
Speedometer
4-5
Tachometer
4-5
Engine coolant temperature gauge
4-6
Fuel gauge
4-6
Outside temperature gauge
4-7
Odometer
4-7
Distance to empty
4-8
Fuel economy (for 10.25-inch cluster)
4-8
Transmission shift indicator
4-9
Automatic transmission
4-9
Warning and indicator lights
4-9
Seat belt warning light
4-9
Air bag warning light
4-9
4
Parking brake & Brake fluid warning light
4-10
Anti-lock Brake System (ABS) warning light
4-11
Electronic Brake Force Distribution (EBD) system warning light
4-11
Electric Power Steering (EPS) warning light
4-12
Charging system warning light
4-12
Engine oil pressure warning light
4-12
Low fuel level warning light
4-13
Malfunction Indicator Lamp (MIL)
4-13
Exhaust system (GPF) warning light
4-14
Electronic Parking Brake (EPB) warning light
4-15
AUTO HOLD indicator light
4-15
Low tire pressure warning light
4-15
Forward Safety warning light
4-16
Lane Safety indicator light
4-16
4 Wheel Drive (AWD) warning light
4-16
4 Wheel Drive (AWD) LOCK Indicator Light
4-17
LED headlight warning light
4-17
Icy road warning light
4-18
Electronic Stability Control (ESC) indicator light
4-18
Electronic Stability Control (ESC) OFF indicator light
4-18
Immobilizer Indicator Light (without smart key)
4-19
Immobilizer Indicator Light (with smart key)
4-19
Downhill Brake Control (DBC) indicator light
4-20
AUTO STOP indicator light
4-20
Turn signal indicator light
4-21
High beam indicator light
4-21
High Beam Assist indicator light
4-21
Cruise Indicator Light
4-21
SPORT Mode Indicator Light
4-22
SMART Mode Indicator Light
4-22
Master warning light
4-22
LCD display messages for vehicles equipped with Smart Key
4-23
Shift to P
4-23
Low key battery
4-23
Press START button while turning wheel
4-23
Check steering wheel lock system
4-23
Press brake pedal to start engine
4-23
Key not in vehicle
4-23
Key not detected
4-23
Press START button again
4-23
4
Press START button with key
4-24
Check BRAKE SWITCH fuse
4-24
Shift to P or N to start engine
4-24
Battery discharging due to external electrical devices
4-24
Door, Hood, Liftgate open indicator
4-25
Sunroof open indicator
4-25
Low tire pressure
4-25
Lights
4-26
Wiper
4-26
Low washer fluid
4-26
Low fuel
4-26
Low engine oil
4-26
Engine overheated / Engine has overheated
4-27
Check exhaust system
4-27
Check headlight
4-27
Check turn signal
4-27
Check headlamp LED
4-27
Check Forward Collision-Avoidance Assist system
4-28
Check Lane Keeping Assist system
4-28
Check Blind-Spot Collision Warning system
4-28
Check Driver Attention Warning system
4-28
Check High Beam Assist system
4-28
Check Smart Cruise Control system
4-28
4.Instrument cluster
LCD display
4-29
LCD display control
4-29
View modes
4-30
Trip computer mode
4-31
Turn By Turn (TBT) mode
4-31
Driving Assist mode
4-31
Master warning group
4-32
User settings mode
4-33
Trip computer (Type A)
4-40
Trip modes
4-40
Trip computer (Type B)
4-43
Trip modes
4-43
Vehicle settings (infotainment system)
4-46
Setting your vehicle
4-46
4
Instrument cluster
INSTRUMENT CLUSTER
4.2-inch
10.25-inch
The actual cluster in the vehicle may differ from the illustration.
For more information, refer to “Gauges and meters” section in this chapter.
ONX4040001N/OCN7040080N
1. Tachometer
4. Fuel gauge
2. Speedometer
5. Warning and indicator lights
3. Engine coolant temperature gauge
6. LCD display
4-4
04
Instrument cluster control
Gauges and meters
Instrument panel illumination
Speedometer
When the vehicle’s parking lights or
4.2-inch
10.25-inch
headlamps are on, press the illumination
control switch to adjust the brightness of
the instrument panel illumination.
When pressing the illumination control
switch, the interior switch illumination
intensity also adjusted.
You can adjust the brightness of the
instrument panel illumination from the
User Settings Mode on the LCD display
when the ignition switch is on (‘Lights →
ONX4E040018
OBC3040005
Illumination’). When the vehicle’s parking
The speedometer indicates the speed of
lights or headlamps are on, interior
the vehicle and is calibrated in miles per
switch illumination intensity and mood
hour (MPH) and/or kilometers per hour
lamps are also adjusted.
(km/h).
If your vehicle is equipped with
additional navigation, please refer
Tachometer
to the infotainment system manual
separately supplied.
4.2-inch
10.25-inch
WARNING
Never adjust the instrument cluster
while driving. This could result in loss
of control and lead to an accident that
may cause vehicle damage, or lead to
serious injury or death.
• The brightness of the instrument
panel illumination is displayed.
ONX4040004
OCN7040007
• When the brightness setting reaches
The tachometer indicates the
either the minimum or maximum
approximate number of engine
level, a chime will sound.
revolutions per minute (RPM).
Use the tachometer to select the correct
shift points and to prevent lugging and/
or over-revving the engine.
NOTICE
Do not operate the engine within the
tachometer's RED ZONE. This may
cause severe engine damage.
4-5
Instrument cluster
Engine coolant temperature gauge
Fuel gauge
4.2-inch
10.25-inch
4.2-inch
10.25-inch
ONX4040007
OTM040010
ONX4040008
OTM040012
This gauge indicates the temperature
This gauge indicates the approximate
of the engine coolant when the ignition
amount of fuel remaining in the fuel tank.
switch is in the ON position.
Information
NOTICE
• The fuel tank capacity is given in
If the gauge pointer moves beyond the
chapter 2.
normal range area toward the H (or
• The fuel gauge is supplemented by
HOT) position, it indicates overheating
a low fuel warning light, which will
that may damage the engine.
illuminate when the fuel tank is nearly
Do not continue driving with an
empty.
overheated engine. If your vehicle
• On inclines or curves, the fuel gauge
overheats, refer to “If the Engine
pointer may fluctuate or the low fuel
Overheats” section in chapter 8.
warning light may come on earlier than
usual due to the movement of fuel in
WARNING
the tank.
Never remove the engine coolant
reservoir cap when the engine is hot.
WARNING
The engine coolant is under pressure
Running out of fuel can expose vehicle
and could cause a severe burn or injury.
occupants to danger.
Wait until the engine is cool before
adding coolant to the reservoir.
You must stop and obtain additional
fuel as soon as possible after the
warning light comes on or when the
gauge indicator comes close to the “E
(Empty) or 0” level.
NOTICE
Avoid driving with an extremely low
fuel level. Running out of fuel could
cause the engine to misfire damaging
the catalytic converter.
4-6
04
Outside temperature gauge
Odometer
Type A
Type B
4.2-inch
10.25-inch
OTMA048112
OTMA040008
OTMA048183
OCN7040015N
The odometer indicates the total
The outside ambient temperature is
displayed in the lower portion of the LCD
distance that the vehicle has been driven
and should be used to determine when
cluster display. The temperature will
read in Fahrenheit or Celsius depending
periodic maintenance is required.
on the units selected in the User Settings
menu.
Note that the temperature indicated
on the LCD display may not change
as quickly as the outside temperature
(there may be a slight delay before the
temperature changes.)
You can change the temperature unit
from the Settings menu in the cluster or
infotainment system screen.
Select:
--
Setup → Unit → Temperature Unit →
°F/°C (for cluster type)
--
Setup → General Settings → Unit
→ Temperature Unit → °C/°F (for
infotainment system screen type)
Both the temperature unit on the cluster
LCD display and infotainment system
screen will change.
4-7
Instrument cluster
Distance to empty
Fuel economy (for 10.25-inch
cluster)
4.2-inch
10.25-inch
OAD048563L
OCN7040016N
OTMA040002
•
The distance to empty is the
estimated mileage the vehicle can be
The average fuel economy (1) and instant
driven with the remaining fuel.
fuel economy (2) is displayed at the
bottom of the cluster.
•
If the estimated distance is below 1 mi.
(1 km), the trip computer will display
“---” as distance to empty. When this
Automatic reset
occurs, the remaining fuel is very low.
To automatically reset the average fuel
Refuel the vehicle immediately.
economy, select between "After Ignition"
or "After Refueling" from the Settings
menu in the infotainment system screen.
Information
•
If the vehicle is not on level ground or
the battery power has been interrupted,
the distance to empty function may not
operate correctly.
•
The distance to empty may differ
from the actual driving distance as it
is an estimate of the available driving
distance.
•
The Distance to Empty indicator may
not change accurately if less than 1.5
gallons of fuel are added to the vehicle.
•
The distance to empty may vary
significantly based on driving
conditions, driving habits, and
condition of the vehicle.
4-8
04
Transmission shift indicator
Warning and indicator lights
Automatic transmission
4.2-inch
10.25-inch
Information
Make sure that all warning lights are OFF
after starting the engine. If any light is still
ON, this indicates a situation that needs
attention.
Seat belt warning light
This warning light informs the driver that
OTM040016
OCN7040013N
the seat belt is not fastened.
The Transmission Shift Indicator is shown
For more details, refer to “Seat Belts”
in the upper corner of the LCD display to
section in chapter 3.
indicate the current gear or Park(P).
Air bag warning light
This warning light illuminates:
• When you turn the ignition switch or
the Engine Start/Stop button to the
ON position.
--
It illuminates for approximately 3~6
seconds and then goes off.
• When there is a malfunction with the
SRS.
If the Air Bag warning light remains
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer.
4-9
Instrument cluster
Parking brake warning light
Dual-diagonal braking system
Your vehicle is equipped with dual-
diagonal braking system. This means you
This warning light illuminates:
still have braking on two wheels even if
one of the dual systems should fail.
• When you set the ignition switch or
the Engine Start/Stop button to the
With only one of the dual systems
ON position.
working, more than normal pedal travel
and greater pedal pressure is required to
--
The parking brake & brake fluid
stop the vehicle.
warning light illuminates for about 3
seconds and will then turn off once
Also, the vehicle will not stop in as short
the parking brake is released.
a distance with only a portion of the
brake system working.
• Whenever the parking brake is
applied.
If you experience a malfunction with
the brake system while driving, attempt
• Whenever the brake fluid level in the
to slow your vehicle by coasting or
reservoir is low.
by using engine braking. You may be
--
If the warning light illuminates
able to reduce your vehicle speed by
with the parking brake released, it
manually downshifting to a lower gear.
indicates the brake fluid level in the
Use Manual Shift Mode using either the
reservoir is low.
gear shift lever or the paddle shifters (if
equipped) to shift to a lower gear.
If the brake fluid level in the reservoir is
low:
WARNING
1. Drive carefully to the nearest safe
location and stop your vehicle.
Parking Brake & Brake Fluid warning
light
2. With the engine stopped, check the
brake fluid level immediately and add
Driving the vehicle with a warning light
fluid as required (For more details,
ON is dangerous. If the Parking Brake
refer to “Brake Fluid” section in
warning light illuminates with the
chapter 9). After adding brake fluid,
parking brake released, it indicates that
check all brake components for fluid
the brake fluid level is low.
leaks. If a brake fluid leak is found, or
If this occurs, we recommend that
if the warning light remains on, or if
you have the vehicle inspected by an
the brakes do not operate properly, do
authorized HYUNDAI dealer.
not drive the vehicle. We recommend
that you have the vehicle inspected by
an authorized HYUNDAI dealer.
4-10
04
Anti-lock Brake System (ABS)
WARNING
warning light
Electronic Brake Force Distribution
(EBD) system warning light
This warning light illuminates:
When both ABS and Parking Brake
• When you set the ignition switch or
warning lights are on, the brake
the Engine Start/Stop button to the
system will not work normally and you
ON position.
may experience an unexpected and
--
The ABS warning light illuminates
dangerous situation during sudden
for about 3 seconds and then goes
braking.
off.
If this occurs, avoid high speed driving
• Whenever there is a malfunction with
and abrupt braking.
the ABS.
We recommend that you have the
Note that the hydraulic braking
vehicle inspected by an authorized
system will still be operational even if
HYUNDAI dealer as soon as possible.
there is a malfunction with the ABS.
If the ABS warning light remains
NOTICE
illuminated while driving, have the
Electronic Brake Force Distribution
vehicle inspected by an authorized
(EBD) system warning light
HYUNDAI dealer.
When the ABS warning light is on or
Electronic Brake Force
both ABS and Parking Brake warning
Distribution (EBD) system
lights are on, the speedometer,
warning light
odometer, or tripmeter may not
work. Also, the EPS warning light may
illuminate and the steering effort may
increase or decrease.
If both the ABS warning light and the
When the ABS warning and
Parking Brake warning light remain
Parking Brake warning lights are on
illuminated while driving, have the
simultaneously, it may indicate a
vehicle inspected by an authorized
problem with the Electronic Brake Force
HYUNDAI dealer.
Distribution system.
If both the ABS warning light and the
Parking Brake warning light remain
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer.
4-11
Instrument cluster
Electric Power Steering (EPS)
Engine oil pressure warning
warning light
light
This warning light illuminates:
This warning light illuminates:
• When you set the ignition switch or
When the engine oil pressure is low.
the Engine Start/Stop button to the
ON position.
If the engine oil pressure is low:
--
The electric power steering warning
• Drive carefully to the nearest safe
light illuminates for about 3 seconds
location and stop your vehicle.
and then goes off.
• Turn the engine off and check the
• Whenever there is a malfunction with
engine oil level (For more details, refer
the electric power steering.
to “Engine Oil” section in chapter 9). If
If the EPS warning light remains
the level is low, add oil as required.
illuminated while driving, have the
If the warning light remains on after
vehicle inspected by an authorized
adding oil or if oil is not available, have
HYUNDAI dealer.
the vehicle inspected by an authorized
HYUNDAI dealer.
Charging system warning
(Continued driving with the warning
light
light on may cause engine failure.)
This warning light illuminates:
Information
When there is a malfunction with either
the alternator or electrical charging
When engine oil pressure decreases due to
system.
insufficient engine oil, etc., the Engine Oil
Pressure warning light will illuminate. In
addition, the enhanced engine protection
If there is a malfunction with either the
system which limits engine power will
alternator or electrical charging system:
be activated. If the engine oil pressure is
1. Drive carefully to the nearest safe
restored, the Engine Oil Pressure warning
location and stop your vehicle.
light and the enhanced engine protection
2. Turn the engine off and check the
system will turn off. However, for gasoline
alternator drive belt for looseness or
2.5 GDI engine, when the engine oil
breakage.
pressure is restored, the warning light and
If the belt is adjusted properly, there
the enhanced engine protection system will
may be a problem in the electrical
turn off after the engine is restarted.
charging system.
If the Charging system warning light
Information
remains illuminated while driving,
When engine oil pressure decreases due to
have the vehicle inspected by an
insufficient engine oil, etc., the Engine Oil
authorized HYUNDAI dealer.
Pressure warning light will illuminate. In
addition, the enhanced engine protection
system which limits engine power will
be activated. If the engine oil pressure is
restored, the Engine Oil Pressure warning
light and the enhanced engine protection
system will turn off.
4-12
04
NOTICE
Low fuel level warning light
•
If the engine does not stop
immediately after the Engine Oil
Pressure warning light is illuminated,
This warning light illuminates:
severe damage could result.
When the fuel tank is nearly empty.
•
If the warning light stays on while the
Add fuel as soon as possible.
engine is running, it indicates that
there may be serious engine damage
NOTICE
or malfunction. In this case:
1.
Stop the vehicle as soon as it is
Driving with the Low Fuel Level
safe to do so.
warning light on or with the fuel level
below "E" or "- - -" on the Distance to
2.
Turn off the engine and check the
Empty indicator can cause the engine
oil level. If the oil level is low, fill
to misfire and damage the catalytic
the engine oil to the proper level.
converter.
3.
Start the engine again. If the
warning light stays on after the
engine is started, turn the engine
Malfunction Indicator Lamp
off immediately. If this occurs,
(MIL)
we recommend that you have
the vehicle inspected by an
This indicator light illuminates:
authorized HYUNDAI dealer.
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
--
The malfunction indicator light
illuminates for about 3 seconds and
then goes off.
• Whenever there is a malfunction with
either the emission control system or
the engine or the vehicle powertrain.
If the MIL warning light remains
illuminated while driving, have the
vehicle inspected by an authorized
HYUNDAI dealer.
• If enhanced engine protection system
becomes activated due to lack of
engine oil, engine power will be
limited. If such condition continues
repeatedly, The Malfunction Indicator
Lamp will illuminate.
4-13
Instrument cluster
NOTICE
Exhaust system (GPF)
warning light (for gasoline
• Driving with the Malfunction
engine, if equipped)
Indicator Lamp (MIL) on may cause
damage to the emission control
• This warning light illuminates, when
system which could affect drivability
accumulated soot reaches a certain
and/or fuel economy.
amount.
• If the enhanced engine protection
• When this warning light illuminates, it
system becomes activated due to
may turn off after driving the vehicle
lack of engine oil, engine power
at more than 50 mph (80km/h) for
will be limited. If such condition
about 30 minutes (above 3rd gear
continues repeatedly, the
with 1500 ~ 4000 engine RPM).
Malfunction Indicator Lamp will
If this warning light blinks in spite
illuminate.
of the procedure (at this time LCD
warning message will be displayed),
NOTICE
we recommend that you have the
GPF system checked by an authorized
If the Malfunction Indicator Lamp
HYUNDAI dealer.
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
NOTICE
If this occurs, we recommend that
If you continue to drive with the GPF
you have the vehicle inspected by an
warning light blinking for a long time,
authorized HYUNDAI dealer as soon as
the GPF system can be damaged and
possible.
fuel consumption can worsen.
4-14
04
Electronic Parking Brake
Low tire pressure warning
(EPB) warning light
light
This warning light illuminates:
This warning light illuminates:
• When you set the ignition switch or
• When you set the ignition switch or
the Engine Start/Stop button to the
the Engine Start/Stop button to the
ON position.
ON position.
--
The EPB warning light illuminates
--
The low tire pressure warning light
for about 3 seconds and then goes
illuminates for approximately 3
off.
seconds and then goes off.
• Whenever there is a malfunction with
• When one or more of your tires are
EPB.
significantly underinflated. (The
location of the underinflated tires are
If the EPB warning light remains
displayed on the LCD display.)
illuminated while driving, have the
vehicle inspected by an authorized
For more details, refer to “Tire Pressure
HYUNDAI dealer.
Monitoring System (TPMS)” section in
chapter 8.
Information
This warning light remains ON after
The Electronic Parking Brake (EPB)
blinking for approximately 60 seconds, or
warning light may illuminate when
repeatedly blinks ON and OFF in 3 second
the Electronic Stability Control (ESC)
intervals:
indicator light comes on to indicate that
When there is a malfunction with the
ESC is not working properly. This does
TPMS.
not indicate malfunction of EPB.
If this occurs, we recommend that
you have the vehicle inspected by an
AUTO HOLD indicator light
authorized HYUNDAI dealer as soon as
possible.
For more details, refer to “Tire Pressure
This indicator light illuminates:
Monitoring System (TPMS)” section in
•
[White] When you activate Auto Hold
chapter 8.
by pressing the AUTO HOLD switch.
•
[Green] When you stop the vehicle
WARNING
completely by depressing the brake
pedal with Auto Hold activated.
Safe Stopping
•
[Yellow] Whenever there is a
• The TPMS cannot alert you to severe
malfunction with the Auto Hold
and sudden tire damage caused by
function.
external factors.
If the AUTO HOLD indicator light
• If you notice any vehicle instability,
remains YELLOW while driving, have
immediately take your foot off the
the vehicle inspected by an authorized
accelerator pedal, apply the brakes
HYUNDAI dealer.
gradually with light force, and slowly
For more details, refer to “Electronic
move to a safe position off the road.
Parking Brake (EPB)” section in chapter
6.
4-15
Instrument cluster
Forward Safety warning light
Lane Safety indicator light
This warning light illuminates:
This indicator light illuminates:
• When you set the ignition switch or
•
[Green] When the system operating
the Engine Start/Stop button to the
conditions are satisfied.
ON position.
•
[White] When the system operating
--
The Forward Safety warning light
conditions are not satisfied.
illuminates for approximately 3
•
[Yellow] Whenever there is a
seconds and then goes off.
malfunction with Lane Keeping Assist.
• Whenever there is a malfunction with
If this occurs, we recommend that
Forward Collision-Avoidance Assist.
you have the vehicle inspected by an
If this occurs, we recommend that
authorized HYUNDAI dealer.
you have the vehicle inspected by an
For more details, refer to “Lane Keeping
authorized HYUNDAI dealer.
Assist (LKA)” section in chapter 7.
For more details, refer to “Forward
Collision-Avoidance Assist (FCA)”
4 Wheel Drive (AWD) warning
section in chapter 7.
light
This warning light illuminates:
Whenever there is a malfunction with the
AWD system.
If this occurs, we recommend that
you have the vehicle inspected by an
authorized HYUNDAI dealer.
For more details, refer to “4 Wheel Drive
(AWD)” section in chapter 6.
4-16
04
4 Wheel Drive (AWD) LOCK
LED headlight warning light
Indicator Light
This indicator light illuminates:
This warning light illuminates:
• Once you set the ignition switch or
• When you set the ignition switch or
Engine Start/Stop Button to the ON
the Engine Start/Stop button to the
position.
ON position.
--
It illuminates for approximately 3
--
The LED headlight warning light
seconds and then goes off.
illuminates for approximately 3
seconds and then goes off.
• When you select AWD Lock mode by
pressing the AWD LOCK button.
• Whenever there is a malfunction with
the LED headlight.
--
The AWD LOCK mode is to increase
the drive power when driving on
If the LED headlight warning light
wet pavement, snow covered roads
remains illuminated while driving,
and/or off-road.
have the vehicle inspected by an
authorized HYUNDAI dealer.
NOTICE
This warning light blinks:
Do not use AWD LOCK mode on dry
Whenever there is a malfunction with a
paved roads or highway, it can cause
LED headlight related part.
noise, vibration or damage of AWD
related parts.
If this occurs, we recommend that
you have the vehicle inspected by an
authorized HYUNDAI dealer.
NOTICE
Continuous driving with the LED
Headlight warning light on or blinking
can reduce LED headlight life.
4-17
Instrument cluster
Icy road warning light
Electronic Stability Control
(ESC) indicator light
This warning light is to warn the driver
This indicator light illuminates:
the road may be icy.
• When you set the ignition switch or
When the temperature on the outside
the Engine Start/Stop button to the
temperature gauge is approximately
ON position.
below 4°C (40°F), the Icy Road warning
--
The Electronic Stability Control
light and Outside Temperature Gauge
indicator light illuminates for about
blinks and then illuminates. Also, the
3 seconds and then goes off.
warning chime sounds 1 time.
• Whenever there is a malfunction with
You can activate or deactivate Icy Road
ESC system.
Warning function from the User Settings
If this occurs, we recommend that
menu in the cluster LCD display.
you have the vehicle inspected by an
Select:
authorized HYUNDAI dealer.
--
Setup → User Settings → Cluster → Icy
Road Warning
This indicator light blinks:
While ESC is operating.
Information
For more details, refer to “Electronic
Stability Control (ESC)” section in
If the Icy Road warning light appears
chapter 6.
while driving, you should drive more
attentively and safely refraining from
over-speeding, rapid acceleration, sudden
Electronic Stability Control
braking or sharp turning, etc.
(ESC) OFF indicator light
(if equipped)
This indicator light illuminates:
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
--
The ESC OFF indicator light
illuminates for approximately 3
seconds and then goes off.
• When you deactivate ESC system by
pressing the ESC OFF button.
For more details, refer to “Electronic
Stability Control (ESC)” section in
chapter 6.
4-18
04
Immobilizer Indicator Light
Immobilizer Indicator Light
(without smart key)
(with smart key)
This indicator light illuminates:
This indicator light illuminates for up to
30 seconds:
• When the vehicle detects the
immobilizer in the key with the
• When the vehicle detects the smart
ignition switch in the ON position.
key in the vehicle with the Engine
Start/Stop button in the ACC or ON
--
At this time, you can start the
engine.
position.
--
At this time, you can start the
--
The indicator light goes off after
engine.
starting the engine.
--
The indicator light goes off after
This indicator light blinks:
starting the engine.
•
When there is a malfunction with the
This indicator light blinks for a few
immobilizer system.
seconds:
In this case, we recommend that
• When the smart key is not in the
you have the vehicle inspected by an
vehicle.
authorized HYUNDAI dealer.
--
At this time, you cannot start the
engine.
This indicator light illuminates for 2
seconds and goes off:
• If the smart key is in the vehicle and
the Engine Start/Stop button is ON,
but the vehicle cannot detect the
smart key.
In this case, we recommend that
you have the vehicle inspected by an
authorized HYUNDAI dealer.
This indicator light blinks:
• When there is a malfunction with the
immobilizer system.
In this case, we recommend that
you have the vehicle inspected by an
authorized HYUNDAI dealer.
4-19
Instrument cluster
Downhill Brake Control (DBC)
IDLE STOP & GO (ISG)
indicator light
indicator light
This indicator light illuminates:
This indicator light illuminates:
• When you set the ignition switch or
When the engine enters the Idle Stop
the Engine Start/Stop button to the
mode of ISG (Idle Stop and Go) system.
ON position.
When the engine automatically starts,
--
The downhill brake control indicator
the IDLE STOP & GO (ISG) indicator on
light illuminates for about 3 seconds
the cluster Illuminates to white.
and then goes off.
• When you activate the system by
For more details, refer to "ISG (Idle Stop
pressing the DBC button.
and Go) system" section in chapter 6.
This indicator light blinks:
Information
When Downhill Brake Control system is
When the engine automatically starts
operating.
by the ISG system, some warning lights
(ABS, ESC, ESC OFF, EPS or Parking
This indicator light illuminates yellow:
brake warning light) may turn on for a
Whenever there is a malfunction with
few seconds. This happens because of
Downhill Brake Control system.
low battery voltage. It does not mean the
If this occurs, we recommend that
system has malfunctioned.
you have the vehicle inspected by an
authorized HYUNDAI dealer.
For more details, refer to "Downhill
Brake Control (DBC)“ section in chapter
6.
4-20
04
Turn signal indicator light
High Beam Assist indicator
light
This indicator light blinks:
This indicator light illuminates:
When you operate the turn signal
When the high-beam is on with the light
indicator stalk.
switch in the AUTO position.
If your vehicle detects oncoming or
If any of the following occur, there may
preceding vehicles, High Beam Assist
be a malfunction with the turn signal
will switch the high beam to low beam
system.
automatically.
--
The turn signal indicator light
For more details, refer to “High Beam
illuminates but does not blink
Assist (HBA)” section in chapter 5.
--
The turn signal indicator light blinks
rapidly
Cruise Indicator Light
--
The turn signal indicator light does not
(if equipped)
illuminate at all
If any of these conditions occur, we
This indicator light illuminates:
recommend that you have the vehicle
When the cruise control system is
inspected by an authorized HYUNDAI
enabled.
dealer.
For more details, refer to "Smart Cruise
Control (SCC)" in chapter 7.
High beam indicator light
This indicator light illuminates:
• When the headlamps are on and in
the high beam position
• When the turn signal lever is pulled
into the Flash-to-Pass position.
4-21
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст