Hyundai Azera (2017 year). Instruction — part 20
Driving your vehicle
ESC OFF usage
■ ESC indicator light
WARNING - Electronic
When driving
stability control
• It’s a good idea to keep the ESC
Drive carefully even though
turned on for daily driving whenev-
your vehicle has Electronic
er possible.
Stability Control. It can only
■ ESC OFF indicator light
• To turn ESC off while driving, press
assist you in maintaining con-
the ESC OFF button while driving
trol under certain circum-
on a flat road surface.
stances.
WARNING - Operating
Indicator light
CAUTION
ESC
When ignition switch is turned ON,
Never press the ESC OFF but-
Driving with varying tire or wheel
the indicator light illuminates, then
ton while ESC is operating (ESC
sizes may cause the ESC system
goes off if the ESC system is operat-
indicator light blinks).
to malfunction. When replacing
ing normally.
tires, make sure they are the
If ESC is turned off while ESC is
The ESC indicator light blinks when-
same size as your original tires.
operating, the vehicle may slip
ever ESC is operating or illuminates
out of control.
Never operate the vehicle with
when ESC fails to operate. The ESC
different diameter tires installed
indicator stays on when the ESC
at the same time.
may have a malfunction. Take your
✽ NOTICE
vehicle to an authorized HYUNDAI
• When operating the vehicle on a
dealer and have the system
dynamometer, ensure that the
checked.
ESC is turned off (ESC OFF light
ESC OFF indicator light comes on
illuminated).
when the ESC is turned off with the
• Turning the ESC off does not affect
button.
ABS or brake system operation.
5 33
Driving your vehicle
Vehicle stability management
The VSM does not operate when:
Malfunction indicator
(VSM)
• Driving on banked roads such as
The VSM can be deactivated even if
This system provides further
gradients or inclines
you do not cancel the VSM operation
enhancements to vehicle stability and
• Driving rearward
by pressing the ESC OFF button. It
steering responses when a vehicle is
• ESC OFF indicator light
(
)
indicates that a malfunction has
driven on a slippery road or a vehicle
remains illuminated on the instru-
been detected somewhere in the
detects changes in coefficient of fric-
ment cluster
EPS (Electronic Power Steering)
tion between right wheels and left
system or VSM system. If the ESC
• EPS (Electronic Power Steering)
wheels when braking.
indicator light (
) or EPS warning
indicator light remains illuminated
light remains on, take your vehicle to
on the instrument cluster
an authorized HYUNDAI dealer and
VSM operation
have the system checked.
When the VSM is operating:
VSM operation off
•
The VSM is designed to function
• ESC (Electronic Stability Control)
If you press the ESC OFF button to
above approximately
9 mph (15
light will blink.
turn off the ESC, the VSM will also
km/h) on curves.
• The steering wheel may be con-
cancel and the ESC OFF indicator
•
The VSM is designed to function
trolled.
light (
) will illuminate.
above approximately 18 mph (30
When the vehicle stability manage-
To turn on the VSM, press the button
km/h) when a vehicle is driving or
ment is operating properly, you can
again. The ESC OFF indicator light
braking on a road with different grip
feel a slight pulsation in the vehicle.
goes out.
under the individual wheels, such as
This is only the effect of brake control
having one or more tires on ice or
and indicates nothing unusual.
mud and the others on dry asphalt.
•
The VSM system is not a substitute
for safe driving practices but a sup-
plementary function only. It is the
responsibility of the driver to
always check the speed and the
distance to the vehicle ahead.
Always hold the steering wheel
firmly while driving.
5 34
Driving your vehicle
• Your vehicle is designed to activate
Hill-start assist control (HAC)
•
The HAC does not operate when
according to the driver’s intention,
the transaxle shift lever is in the P
The main intent is to help prevent the
even with the VSM installed.
(Park) or N (Neutral) position.
vehicle from rolling backwards while
Always follow all the normal pre-
•
The HAC activates even though
driving uphill on an inclined surface.
cautions for driving at safe speeds
the ESC is off but it does not acti-
HAC holds the braking pressure built
for the conditions - including driv-
vate when the ESC has malfunc-
up by the driver when the vehicle is
ing in inclement weather and on a
tioned.
stopped for 2 seconds after releasing
slippery road.
the brake pedal.
During the pressure-hold period, the
WARNING - Tire/wheel
driver has enough time to depress
sizes
the accelerator pedal to drive off.
When replacing tires and
The braking pressure is reduced as
wheels, make sure they are the
soon as the system detects the dri-
same size as the original tires
ver’s intention to drive off.
and wheels installed. Driving
with varying tire or wheel sizes
WARNING - Rolling
may diminish any supplemental
backward
safety benefits of the VSM sys-
Drivers should pay close atten-
tem.
tion when activating the HAC.
The vehicle may roll backward
causing an accident due to
insufficient brake hold pressure,
causing injury or death.
5 35
Driving your vehicle
Good braking practices
•
Check to be sure the parking brake
•
Do not "ride" the brake pedal.
is not engaged and that the park-
Resting your foot on the brake
ing brake indicator light is out
pedal while driving can be danger-
WARNING
before driving away.
ous because the brakes might
•
Whenever leaving the vehicle
•
Driving through water may get the
overheat and lose their effective-
or parking, always set the
brakes wet. They can also get wet
ness. It also increases the wear of
parking brake as far as possi-
when the car is washed. Wet brakes
the brake components.
ble and fully engage the vehi-
can be dangerous! Your vehicle will
•
If a tire goes flat while you are driv-
cle's transaxle into the P
not stop as quickly if the brakes are
ing, apply the brakes gently and
(Park) position. Vehicles not
wet. Wet brakes may cause the
keep the vehicle pointed straight
fully engaged in P (Park) with
vehicle to pull to one side.
ahead while you slow down. When
the parking brake set are at
you are moving slowly enough for it
To dry the brakes, apply the brakes
risk for moving inadvertently
lightly until the braking action
to be safe to do so, pull off the road
and injuring yourself or oth-
and stop in a safe place.
returns to normal, taking care to
ers.
keep the vehicle under control at
•
If your vehicle is equipped with an
•
All vehicles should always
all times. If the braking action does
automatic transaxle, do not let your
have the parking brake fully
not return to normal, stop as soon
vehicle creep forward. To avoid
engaged when parking to
as it is safe to do so and call an
creeping forward, keep your foot
avoid inadvertent movement
authorized HYUNDAI dealer for
firmly on the brake pedal when the
of the vehicle which can injure
assistance.
vehicle is stopped.
occupants or pedestrians.
•
Do not coast down hills with the
vehicle out of gear. This is extreme-
ly hazardous. Keep the vehicle in
gear at all times, use the brakes to
slow down, then shift to a lower
gear so that engine braking will
help you maintain a safe speed.
5 36
Driving your vehicle
•
Be cautious when parking on a hill.
Firmly engage the parking brake
and place the shift lever in P
(Park). If your vehicle is facing
downhill, turn the front wheels into
the curb to help keep the vehicle
from rolling. If your vehicle is facing
uphill, turn the front wheels away
from the curb to help keep the vehi-
cle from rolling. If there is no curb
or if it is required by other condi-
tions to keep the vehicle from
rolling, block the wheels.
•
Under some conditions your park-
ing brake can freeze in the engaged
position. This is most likely to hap-
pen when there is an accumulation
of snow or ice around or near the
rear brakes or if the brakes are wet.
If there is a risk that the parking
brake may freeze, apply it only tem-
porarily while you put the shift lever
in P
(Park) and block the rear
wheels so the vehicle cannot roll.
Then release the parking brake.
•
Do not hold the vehicle on the
upgrade with the accelerator
pedal. This can cause the transaxle
to overheat. Always use the brake
pedal or parking brake.
5 37
Driving your vehicle
CRUISE CONTROL SYSTEM
•
If the cruise control is left on
✽ NOTICE
(CRUISE indicator light in the
•
During normal cruise control
instrument cluster illuminated), the
operation, when the SET switch is
cruise control can be switched on
activated or reactivated after
accidentally. Keep the cruise con-
applying the brakes, the cruise
trol system off (CRUISE indicator
control will energize after approx-
light OFF) when the cruise control
imately 3 seconds. This delay is
is not in use, to avoid inadvertently
normal.
setting a speed.
•
To activate cruise control, depress
•
Use the cruise control system only
the brake pedal at least once after
when traveling on open highways
turning the ignition switch to the
OHG055032
in good weather.
ON position or starting the engine.
•
Do not use the Cruise Control
This is to check if the brake switch
➀ Cruise indicator
when it may not be safe to keep the
which is important part to cancel
➁ SET indicator
vehicle at a constant speed:
cruise control is in normal condi-
- When driving in rainy, icy, or
tion.
The cruise control system allows you
snow-covered roads.
to program the vehicle to maintain a
- When driving with limited view
constant speed without depressing
WARNING - Misuse of
(possibly due to bad weather,
the accelerator pedal.
cruise control
such as fog, snow, rain or sand-
This system is designed to function
storm)
• Do not use cruise control if
above approximately 20 mph.
the traffic situation does not
allow you to drive safely at a
constant speed and with suffi-
cient distance to the vehicle in
front.
• Do not use cruise control
when towing a trailer.
5 38
Driving your vehicle
OHG055033
OHG055035
OHG055034
To set cruise control speed:
3. Push the SET- switch, and release
To increase cruise control set
it at the desired speed. The SET
speed:
1. Push the CRUISE button on the
indicator light in the instrument
steering wheel to turn the system
Follow either of these procedures:
cluster will illuminate. Release the
on. The CRUISE indicator light in
• Push the RES+ switch and hold it.
accelerator pedal. The desired
the instrument cluster will illumi-
Your vehicle will accelerate.
speed will automatically be main-
nate.
Release the switch at the speed
tained.
2. Accelerate to the desired speed,
you want.
On a steep grade, the vehicle may
which must be more than 20 mph.
• Push the RES+ switch and release
slow down or speed up slightly while
it immediately. The cruising speed
going uphill or downhill.
will increase by 1.0 mph each time
the RES+ switch is operated in this
manner.
5 39
Driving your vehicle
To temporarily accelerate with
the cruise control on:
If you want to speed up temporarily
when the cruise control is on, depress
the accelerator pedal. Increased speed
will not interfere with cruise control
operation or change the set speed.
To return to the set speed, take your
foot off the accelerator pedal.
If you press the SET- switch at
increased speed, the cruising speed
OHG055035
OHG055036
will be set again.
To decrease cruise control set
To cancel cruise control, do
speed:
one of the following:
Follow either of these procedures:
• Depress the brake pedal.
• Push the SET- switch and hold it.
• Shift into N (Neutral) with an auto-
Your vehicle will gradually slow
matic transaxle.
down. Release the switch at the
• Press the CANCEL switch located
speed you want to maintain.
on the steering wheel.
• Push the SET- switch and release
• Decrease the vehicle speed lower
it immediately. The cruising speed
than the memory speed by 9 mph.
will decrease by 1.0 mph each time
• Decrease the vehicle speed to less
the SET- switch is operated in this
than approximately 20 mph.
manner.
5 40
Driving your vehicle
Each of these actions will cancel
cruise control operation
(the SET
indicator light in the instrument clus-
ter will go off), but it will not turn the
system off. If you wish to resume
cruise control operation, push the
RES+ switch located on your steer-
ing wheel. You will return to your pre-
viously preset speed.
OHG055034
OHG055033
To resume cruising speed at
To turn cruise control off, do
more than approximately 25
one of the following:
mph:
• Push the CRUISE button
(the
If any method other than the CRUISE
CRUISE indicator light in the
switch was used to cancel cruising
instrument cluster will go off).
speed and the system is still activat-
• Turn the ignition off.
ed, the most recent set speed will
Both of these actions cancel cruise
automatically resume when the
control operation. If you want to
RES+ switch is pushed.
resume cruise control operation,
It will not resume, however, if the
repeat the steps provided in “To set
vehicle speed has dropped below
cruise control speed” on the previous
approximately 20 mph.
page.
5 41
Driving your vehicle
SMART CRUISE CONTROL SYSTEM (IF EQUIPPED)
The smart cruise control system
(Continued)
allows you to program the vehicle to
•
Use the smart cruise control
maintain constant speed and dis-
system only when traveling
tance detecting the vehicle ahead
on open highways in good
without depressing the accelerator/
weather.
brake pedal.
•
Do not use the smart cruise
control when it may not be
WARNING
safe to keep the car at a con-
stant speed. For instance,
For your safety, please read the
driving in heavy or varying
owner's manual before using
traffic, or on slippery
(rainy,
OHG056167N
the smart cruise control sys-
icy or snow-covered) or wind-
tem.
(1) Cruise indicator
ing roads or steep hills.
(2) Set speed
•
Pay particular attention to the
(3) Vehicle-to-vehicle distance
driving conditions whenever
WARNING
using the smart cruise control
system.
• If the smart cruise control is
left on, (cruise indicator light
•
The smart cruise control sys-
in the instrument cluster illu-
tem is not a substitute for safe
minated) the smart cruise
driving. It is the responsibility
control can be activated unin-
of the driver to always check
tentionally. Keep the smart
the speed and distance of the
cruise control system off
vehicle ahead.
(cruise indicator light off)
when the smart cruise control
is not used.
(Continued)
5 42
Driving your vehicle
OHG055053L
OHG055054L
OHG055055L
Smart cruise control speed
3. Push the SET- switch, and release
To increase cruise control set
it at the desired speed. The SET
speed:
To set cruise control speed:
indicator light, set speed and vehi-
Follow either of these procedures:
1. Push the [cruise] button on the
cle to vehicle distance on the LCD
• Push the RES+ switch and hold it.
steering wheel to turn the system
screen will illuminate.
Your vehicle set speed will
on. The CRUISE indicator light in
4. Release the accelerator pedal.
increase by
5 mph (10 km/h).
the instrument cluster will illumi-
The desired speed will automati-
Release the switch at the speed
nate.
cally be maintained.
you want.
2. Accelerate to the desired speed.
If there is a vehicle in front of you, the
• Push the RES+ switch and release
The smart cruise control speed
speed may decrease to maintain the
it immediately. The cruising speed
can be set as follows:
distance to the vehicle ahead.
will increase by 1.0 mph (1.0 km/h)
• 20 mph (30 km/h) ~ 110 mph
On a steep grade, the vehicle may
each time the RES+ switch is oper-
(180 km/h): when there is no
slow down or speed up slightly while
ated in this manner.
vehicle in front
going uphill or downhill.
• You can set the speed to 110 mph
• 0 mph (0 km/h) ~ 110 mph (180
(180 km/h).
km/h): when there is a vehicle in
front
5 43
Driving your vehicle
To temporarily accelerate with the
cruise control on:
If you want to speed up temporarily
when the cruise control is on,
depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
To return to the set speed, take your
foot off the accelerator.
If you press the SET- switch the
OHG055054L
increased cruising speed will return
OHG055056L
to it’s set speed.
To decrease the crusie control
Smart Cruise control will be tem-
set speed:
porarily canceled when:
Follow either of these procedures:
✽ NOTICE
Cancelled manually
• Push the SET- switch and hold it.
Be careful when accelerating tem-
• Depressing the brake pedal.
Your vehicle set speed will
porarily, because the speed is not
• Pressing the CANCEL button
decrease by
5 mph (10 km/h).
controlled automatically at this
locatedon the steering wheel.
Release the switch at the speed
time even if there is a vehicle in front
you want.
of you.
The Smart Cruise Control turns off
• Push the SET- switch and release
tem-porarily when the indicator on
it immediately. The cruising speed
the LCDdisplay turns off.The
will decrease by
1.0 mph
(1.0
CRUISE indicator is illuminated con-
km/h) each time the SET- switch is
tinuously.
operated in this manner.
• You can set the speed to 20 mph
(30 km/h).
5 44
Driving your vehicle
Cancelled automatically
•
The accelerator pedal is continu-
•
The driver's door is opened.
ously depressed for more than 1
minute.
•
The EPB (electronic parking brake)
is applied.
Each of these actions will cancel
•
The vehicle speed is over 110 mph
the smart cruise control operation.
(180 km/h)
(The SET indicator, set speed and
•
The vehicle stops on a steep
vehicle to vehicle distance on the
incline.
LCD display will go off.)
•
The ESC or ABS is operating.
In a condition the smart cruise con-
•
The ESC is turned off.
trol is cancelled automatically, the
smart cruise control will not
•
The sensor or the cover is dirty or
OHG045232L
resume even though the RES+ or
blocked with foreign matter.
SET- switch is pushed. Also, the
If the system is cancelled, the warn-
•
The vehicle stops and go repeat-
EPB (electronic parking brake) will
ing chime will sound and a message
edly for a long period of time.
be applied.
will appear for a few seconds. You
•
The driver starts driving by
must adjust the vehicle speed, as
depressing the accelerator pedal
well as the distance to the vehicle
or pushing the RES+ switch if a
CAUTION
ahead by depressing the accelerator
vehicle stops far away ahead of the
If the smart cruise control is
or brake pedal.
your vehicle.
cancelled by other than the rea-
Always check the road conditions.
•
The shift lever is shifted to N
sons mentioned, have the sys-
Do not rely on the warning chime.
(Neutral), R (Reverse), D (Drive).
tem checked by an authorized
•
The vehicle stops on a steep
HYUNDAI dealer.
incline.
•
The vehicle stops and go repeat-
edly for a long period of time.
•
The Smart Cruise Control has mal-
functioned.
5 45
Driving your vehicle
✽ NOTICE
Always check the road conditions
when pressing the RES+ switch to
resume speed.
OHG055055L
OHG055053L
To resume cruise control set
To turn cruise control off:
speed:
Push the
[CRUISE] button
(the
CRUISE indicator light in the instru-
If any method other than the [cruise]
switch was used to cancel cruising
ment cluster will go off).
speed and the system is still activat-
ed, the cruising speed will automati-
cally resume when the SET- or RES+
switch is pushed.
If the RES+ switch is pushed, the
speed will resume to the recently set
speed. It will not resume if the vehicle
speed has dropped below approxi-
mately
20 mph (30 km/h), when
there is no vehicle ahead in a close
distance. It will resume when a vehi-
cle in front of your vehicle is detected
even when the vehicle speed is
below 20 mph (30 km/h).
5
46
Driving your vehicle
Each time the button is pressed, the
vehicle to vehicle distance changes
as follows:
Distance 4
Distance 3
Distance 2
Distance 1
For example, if you drive at 55 mph
Distance 4
Distance 3
(90 km/h), the distance maintain as
OHG056167N/OHG056166N
follows;
OHG055057K
Distance 4 - approximately 172 feet
Smart cruise control vehicle to
(52 m)
vehicle distance
Distance 3 - approximately 130 feet
To set vehicle to vehicle distance:
(40 m)
This function allows you to program
Distance 2 - approximately 106 feet
the vehicle to maintain relative dis-
(32 m)
tance to the vehicle ahead without
Distance 1 - approximately 82 feet
Distance 2
Distance 1
depressing the accelerator pedal or
(25 m)
OHG056165N/OHG056164N
brake pedal.
•
The vehicle will maintain the set
The vehicle to vehicle distance will
✽ NOTICE
speed, when the lane ahead is
automatically activate when the
The 'Distance 4' is always set when
clear.
smart cruise control system is on.
the system is used for the first time
•
The vehicle will slow down or
Select the appropriate distance
after starting the engine.
speed up to maintain the selected
according to road conditions and
distance, when there is a vehicle
vehicle speed.
ahead of you in the lane. (A vehicle
will appear in front of your vehicle
in the LCD display only when there
is an actual vehicle in front of you)
5 47
Driving your vehicle
•
If the vehicle ahead speeds up,
your vehicle will travel at a steady
CAUTION
cruising speed after accelerating to
•
The warning chime sounds
the selected speed.
and malfunction indicator
blinks if it is hard to maintain
the selected distance to the
vehicle ahead.
•
If the warning chime sounds,
actively adjust the vehicle
speed, as well as the distance
to the vehicle ahead by
depressing the accelerator or
OHG045233L
brake pedal.
•
Even if the warning chime is
CAUTION
not activated, always pay
attention to the driving condi-
If the vehicle ahead
(vehicle
tions to prevent dangerous
speed: less than
20 mph (30
situations from occurring.
km/h)) disappears to the next
lane, the warning chime will
sound and a message will
appear. Adjust your vehicle
speed for vehicles or objects
that can suddenly appear in
front of you by depressing the
brake pedal according to the
road condition ahead and driv-
ing condition.
5 48
Driving your vehicle
OHG045234L
OHG055059
OHG045525L
In traffic situation
Sensor to detect distance to
Sensor warning message
•
In traffic, your vehicle will stop if the
the vehicle ahead
If the sensor or cover is dirty or
vehicle ahead of you stops. Also, if
obscured with foreign matter such as
The sensor detects the distance to
the vehicle ahead of you starts
the vehicle ahead.
snow, this message will appear.
moving, your vehicle will start as
In this case, the system may not
If the sensor is covered with dirt or
well. However, if the vehicle stops
function temporarily, but it does not
other foreign matter, the vehicle to
for more than 3 seconds, you must
indicate a malfunction of the Smart
vehicle distance control may not
depress the accelerator pedal or
Cruise Control System.
operate correctly.
push the (RES+ or SET-) switch to
Always keep the area in front of the
Clean the sensor or cover by using a
start driving.
sensor clean.
soft cloth.
•
If you push the Smart cruise con-
trol switch
(RES+ or SET-) while
Auto Hold and Smart cruise control
is operating
(The green AUTO
HOLD indicator), Auto Hold will be
released regardless of accelerator
pedal operation and the vehicle will
start to move.
5 49
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст