Hyundai Tiburon (2003 year). Manual — part 149
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Intake
Actuator > Schematic Diagrams, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Blower > Intake Actuator > Schematic Diagrams
CONNECTOR
Teminal No.
1
2
3
4
5
6
7
Mode
FRE
REC
X
X
X
X
X
CIRCUIT DIAGRAM
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Intake
Actuator > Description and Operation, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Blower > Intake Actuator > Description and Operation
DESCRIPTION
- Operating temp. : -30°C ~ +80°C
- Operating voltage : DC 9V ~ 16V
- Rated voltage : DC 12V
- Rated load : 4kgf/cm
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Intake Actuator >
Components and Components Location, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Blower > Intake Actuator > Components and Components Location
COMPONENT LOCATION
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Intake
Actuator > Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Blower > Intake Actuator > Repair procedures
REPLACEMENT
1. Disconnect the 7P connector (A) from the inlet actuator (B). Remove the self-tapping screws and the inlet
actuator from the blower unit.
2. Install in the reverse order of removal. After installation, make sure the inlet actuator runs smoothly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст