Hyundai Tiburon (2003 year). Manual — part 143
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Heater > Mode Control
Actuator > Description and Operation, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Heater > Mode Control Actuator > Description and Operation
DESCRIPTION
- Operating temp. : -30°C ~ +80°C
- Operating voltage : DC 9V ~ 16V
- Rated voltage : DC 12V
- Rated load : 4kgf/cm
- Rated voltage : DC 12V
- Rated watt. : 0.25W (at 40°C)
- Opration volt : DC 5V ± 0.5V
- Total resistance : 5k
Ω
± 10%
- Output lock torque : Min 1.76Nm (18kgf/cm) (at DC 12V)
- Rated AMP. : Max 150mA
- Lock vol. : Max. 400mA
- Characteristics
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Heater > Mode Control Actuator
> Components and Components Location, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Heater > Mode Control Actuator > Components and Components Location
COMPONENT LOCATION
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Heater > Mode Control
Actuator > Repair procedures, TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air
Conditioning > Heater > Mode Control Actuator > Repair procedures
REPLACEMENT
1. Remove the 7P connector (A) from the mode actuator (B). Remove the self-tapping screws and the mode
actuator from the heater unit.
2. Install in the reverse order of removal. After installation, make sure the mode actuator runs smoothly.
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Schematic Diagrams,
TIBURON(GK) > 2003 > G 2.7 V6 DOHC > Heating,Ventilation, Air Conditioning > Blower > Schematic Diagrams
CIRCUIT DIAGRAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст