Hyundai Kona (2022 year). Manual in english — page 6
Convenient features
ThefT-alarm sysTem
This system helps to protect your vehicle
Information
and valuables. The horn will sound and
the hazard warning lights will blink
•
Do not lock the doors until all
continuously if any of the following
passengers have left the vehicle. If the
occur:
remaining passenger leaves the vehicle
when the system is armed, the alarm
- A door is opened without using the
will be activated.
smart key.
•
If the vehicle is not disarmed with the
- The tailgate is opened without using
smart key, open the doors by using the
the smart key.
mechanical key and start the engine by
- The engine hood is opened.
directly pressing the Engine Start/Stop
The alarm continues for 30 seconds, then
button with the smart key.
the system resets. To turn off the alarm,
•
If the system is disarmed by unlocking
unlock the doors with the smart key.
the vehicle, but neither a door or the
The Theft Alarm System automatically
tailgate is opened within 30 seconds, the
sets 30 seconds after you lock the
doors will relock and the system will
doors and the tailgate. For the system
rearm automatically.
to activate, you must lock the doors and
the tailgate from outside the vehicle with
the smart key or by touching the touch
sensor on the outside of the door handle
with the smart key in your possession.
The hazard warning lights will blink and
the chime will sound once to indicate the
system is armed.
Once the security system is set, opening
any door, the tailgate, or the hood
without using the smart key will cause
the alarm to activate.
The Theft Alarm System will not set if the
hood, the tailgate, or any door is not fully
closed. If the system will not set, check
the hood, the tailgate, or the doors are
fully closed.
Do not attempt to alter this system or
add other devices to it.
5-20
05
steering wheel
Electric Power Steering (EPS)
Information
The system assists you with steering the
The following symptoms may occur during
vehicle. If the vehicle is turned off or
normal vehicle operation:
if the power steering system becomes
•
The steering effort may be high
inoperative, you may still steer the
immediately after pressing the Engine
vehicle, but it will require increased
Start/Stop button to the ON position.
steering effort.
This happens as the system performs
Should you notice any change in the
the EPS system diagnostics. When the
effort required to steer during normal
diagnostics are completed, the steering
vehicle operation, have the system
wheel effort will return to its normal
checked by an authorized HYUNDAI
condition.
dealer.
•
When the battery voltage is low, you
might have to put more steering effort.
CAUTION
However, it is a temporary condition so
•
If Electric Power Steering does not
that it will return to normal condition
operate normally, the
warning
after charging the battery.
light and the message ‘Check motor
•
A click noise may be heard from the
driven power steering’ will illuminate
EPS relay after the Engine Start/Stop
on the instrument cluster. You may
button is in the ON or OFF position.
steer the vehicle, but it will require
•
Motor noise may be heard when the
increased steering efforts. Take your
vehicle is at a stop or at a low driving
vehicle to an authorized HYUNDAI
speed.
dealer or to a service station and
have the system checked as soon as
•
When you operate the steering wheel
in low temperatures, abnormal noise
possible.
may occur. If the temperature rises, the
•
When abnormality is detected in
noise will disappear. This is a normal
the electric power steering system,
condition.
to prevent a deadly accident, the
•
When an error is detected from EPS,
steering assist function will stop. At
the steering effort assist function will
this time, the warning light turns on
not be activated in order to prevent
or blinks on the cluster. The steering
fatal accidents. Instrument cluster
wheel may become difficult to
warning lights may be on or the
control or operate. Have your vehicle
steering effort may be high. If these
checked immediately, after moving
symptoms occur, drive the vehicle to
the vehicle to a safe zone.
a safe area as soon as it is safe to do
so. Have the system checked by an
authorized HYUNDAI dealer as soon
as possible.
5-21
Convenient features
Tilt / Telescopic steering
When adjusting the steering wheel to a
comfortable position, adjust the steering
wheel so that it points toward your chest,
not toward your face. Make sure you can
see the instrument cluster warning lights
and gauges. After adjusting, push the
steering wheel both up and down to be
certain it is locked in position.
Always adjust the position of the steering
wheel before driving.
OOS047006
To adjust the steering wheel angle and
WARNING
height:
NEVER adjust the steering wheel while
1. Pull down the lock-release lever (1).
driving. This may cause loss of vehicle
2. Adjust the steering wheel to the
control resulting in an accident.
desired angle (2) and distance
forward/back (3).
3. Pull up the lock-release lever to lock
the steering wheel in place.
Information
Sometimes the lock release lever may not
engage completely. This may occur when
the gears of the locking mechanism do not
completely mesh. If this occurs, pull down
on the lock-release lever, readjust the
steering wheel again, and then pull back
up on the release lever to lock the steering
wheel in place.
5-22
05
Heated steering wheel
Horn
(if equipped)
OOS047008
OOS050003K
To sound the horn, press the area
When the ignition switch is in the ON
indicated by the horn symbol on your
position or when the engine is running,
steering wheel (see illustration). The
press the heated steering wheel button
horn will operate only when this area is
to warm the steering wheel.
pressed.
The indicator on the button will
illuminate.
NOTICE
To turn the heated steering wheel off,
Do not strike the horn severely to
press the button again. The indicator on
operate it, or hit it with your fist. Do not
the button will turn off.
press on the horn with a sharp-pointed
object.
Information
The heated steering wheel will turn off
automatically approximately 30 minutes
after the heated steering wheel is turned
on.
NOTICE
Do not install any cover or accessory
on the steering wheel. This cover or
accessory could cause damage to the
heated steering wheel system.
5-23
Convenient features
mirrors
Inside rearview mirror
Day/night rearview mirror (if
equipped)
Before driving your vehicle, check to
see that your inside rearview mirror is
properly positioned. Adjust the rearview
mirror so that the view through the rear
window is properly centered.
WARNING
Make sure your line of sight is not
obstructed. Do not place objects in the
rear seat, cargo area, or behind the rear
headrests which could interfere with
your vision through the rear window.
OOS040479N
[A] : Day, [B] : Night
WARNING
Make this adjustment before you start
driving and while the day/night lever is in
To prevent serious injury during an
the day position.
accident or deployment of the air bag,
do not modify the rearview mirror and
Pull the day/night lever towards you to
do not install a wide mirror.
reduce glare from the headlights of the
vehicles behind you during night driving.
Remember that you lose some rearview
WARNING
clarity in the night position.
NEVER adjust the mirror while driving.
This may cause loss of vehicle control
resulting in an accident.
NOTICE
When cleaning the mirror, use a paper
towel or similar material dampened
with glass cleaner. Do not spray glass
cleaner directly on the mirror as this
may cause the liquid cleaner to enter
the mirror housing.
5-24
05
Blue Link® center
Electrochromic mirror (ECM) with
HomeLink® system and Blue Link®
For USA
(if equipped)
For USA
HomeLink Indicator
OOS050133N
For Canada
Telematics buttons HomeLink Button
OOS047093N
For Canada
HomeLink Indicator
OOS050133C
For details, refer to the Blue Link®
Telematics buttons HomeLink Button
Owner’s Guide, Navigation Manual or
OOS047093C
Audio Manual.
Your vehicle may be equipped with a
Gentex Automatic-Dimming Mirror with
a Z-Nav™ Electronic Compass Display
and an Integrated HomeLink® Wireless
Control System. During nighttime
driving, this feature will automatically
detect and reduce rearview mirror
glare while the compass indicates the
direction the vehicle is traveling. The
HomeLink® Universal Transceiver allows
you to activate your garage door(s),
electric gate, home lighting, etc.
5-25
Convenient features
(1) HomeLink Channel 1
Integrated HomeLink® Wireless Control
(2) HomeLink Channel 2
System
The HomeLink® Wireless Control System
(3) HomeLink Channel 3
provides a convenient way to replace
(4) Garage Door Opener Status
up to three hand held radio-frequency
Indicator : Closing or Closed
transmitters used to activate compatible
(5) HomeLink Operation Indicator
devices such as gate operators, garage
(6) Garage Door Opener Status
door openers, entry door locks, security
Indicator : Opening or Opened
systems, and home lighting.
(7) HomeLink User Interface Indicator
NOTICE
Automatic-Dimming Night Vision Safety™
HomeLink® operates while the ignition
(NVS®) Mirror (if equipped)
switch is in the ACC or ON position
The NVS® Mirror automatically reduces
for safety reasons. It is to prevent
glare by monitoring light levels in the
unintentional security problems from
front and the rear of the vehicle. Any
happening when the vehicle is parked
object that obstructs either light sensor
outside the garage.
will degrade the automatic dimming
control feature.
WARNING
For more information regarding NVS®
mirrors and other applications, please
Before programming HomeLink® to a
garage door opener or gate operator,
refer to the Gentex website:
make sure people and objects are out
of the way of the device to prevent
potential harm or damage. Do not
Your mirror will automatically dim
use the HomeLink® with any garage
upon detecting glare from the vehicles
door opener that lacks the safety
traveling behind you.
stop and reverse features required
by U.S. federal safety standards (this
The mirror defaults to the ON position
includes any garage door opener model
each time the vehicle is started.
manufactured before April 1, 1982).
A garage door that cannot detect an
object - signaling the door to stop and
reverse - does not meet current U.S.
federal safety standards. Using a garage
door opener without these features
increases the risk of serious injury or
death.
For more information, contact
HomeLink® at www.homelink.com, or
call Home-Link customer support at
1-800-355-3515.
It is also recommended that a new
battery be replaced in the handheld
transmitter of the device being trained
to HomeLink® for quicker training and
accurate transmission of the radio
frequency.
5-26
05
1. Programming HomeLink®
1) Programming Preparation
The following steps show how to
program HomeLink. If you have any
questions or are having difficulty
programming your HomeLink buttons,
refer to the HomeLink website or call the
HomeLink customer support toll-free
number. Do this, before going back to
the dealer who sold you the car.
• Visit the HomeLink website at: www.
homelink.com. Then at the top of the
page, choose your vehicle make. Then
watch the You Tube video, and/or
OOS040477N
access additional website information.
1. When programming a garage door
opener, it is advised to park the
• If you choose to access
vehicle outside of the garage.
the website via your cell
phone, scan the QR code.
2. It is recommended that a new battery
be placed in the handheld transmitter
of the device being programmed to
• Or, call HomeLink customer support
HomeLink for quicker training and
at 1-800-355-3515 (Please have the
accurate transmission of the radio-
vehicle make/model AND the opener
frequency signal.
device make/model readily available.)
3. Place the ignition switch to the ACC
(Accessory) position for programming
of HomeLink.
2) Programming a New HomeLink®
OOS040095N
1. Press and release the HomeLink
button (1), (2) or (3), you would like
to program. The HomeLink indicator
light (7) will flash orange slowly (if
not, perform the steps of “Erasing
HomeLink Buttons” section, and start
over).
5-27
Convenient features
6. At the garage door opener motor,
(security gate motor, etc.) locate the
“Learn”, “Smart”, “Set” or “Program”
button. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit (see
the device’s manual to identify this
button). The name and color of the
button may vary by manufacturer.
OOS040476N
2. Position the garage door opener
remote 1 - 3 inches (2 - 8cm) away
from the HoleLink buttons.
3. While the HomeLink indicator light (7)
is flashing orange, press and hold the
hand-held remote button. Continue
pressing the handheld remote button
until the HomeLink indicator light (7)
changes from orange to green. You
ODL3A040504
may now release the handheld remote
button.
à A ladder and/or second person may
simplify the following steps.
4. Wait until your garage door comes
to a complete stop, regardless of
7. Firmly press and release the “Learn”,
position, before proceeding to the
“Smart”, “Set” or “Program” button.
next steps.
You now have up to 30 seconds in
which to complete the next step.
5. Press and release the HomeLink
button you are programming and
8. Return to the vehicle and firmly press,
observe the indicator light.
hold for two seconds and release,
the HomeLink button up to three
• If the indicator light remains solid
times in a row slowly. Do not press
green, your device should operate
the HomeLink button rapidly. As soon
when the HomeLink button is
as you see the garage door start to
pressed. At this point, if your device
move, stop pressing any buttons
operates, programming is complete.
until a few seconds after the garage
• If the indicator light rapidly
door has come to a complete stop,
flashes green, firmly press, hold
regardless of position. At this point,
for two seconds and release the
programming is complete and your
HomeLink button up to three times
device should operate when the
in a row slowly to complete the
HomeLink button is pressed and
programming process. Do not press
released.
the HomeLink button rapidly. At
this point if your device operates,
programming is complete. If the
device does not operate, continue
with step 6.
5-28
05
3) Two-Way Communication
1. In your vehicle, press and hold the
Programming (For select garage door
programmed HomeLink button for 2
openers)
seconds, then release. Confirm that
If your garage door opener has the
the garage door is moving. AFTER it
stops, you will have one minute to
‘myQ’ logo on its side, your opener
complete the following steps:
likely has Two-Way Communication
capability. HomeLink has the capability
à A ladder and/or second person may
to establish Two-Way Communication
simplify the following steps.
with your garage door opener. HomeLink
2. On your garage door opener in your
can receive and display “closing”
garage, locate the “Learn” button
or “opening” status messages from
(usually near where the hanging
compatible garage door openers. At
antenna wire is attached to the garage
any time, Home-Link can also recall
door opener). If there is difficulty
and display the last recorded status
locating this button, reference the
communicated by the garage door
device’s owner’s manual.
opener to indicate your garage door
3. Press and release the “Learn” button.
being “closed” or “opened”.
4. A light on your garage door opener
To check if your garage door opener is
may flash, and your Two-Way
compatible with this feature, refer to
Communication indicators (4), (6) in
your vehicle may flash, confirming
way-Communication. If your garage
completion of the process.
door opener has this functionality, AND
the Two-Way Communication indicators
5. Return to the vehicle and firmly
(4), (6) in the mirror appear while the
press and release the programmed
garage door is opening/closing, then
HomeLink button to activate
no further steps are needed. Two-Way
your garage door. The Two-Way
Communication Programming is already
Communication indicators (4), (6)
complete.
flash in orange when the door is
moving. Do not make any additional
However, if your garage door opener
button presses until AFTER the garage
has this functionality, AND the Two-
door has come to a complete stop.
Way Communication indicators (4), (6)
in the mirror DO NOT appear while the
6. Your Two-Way Communication
garage door is opening/closing, use
programming is now complete.
the following instructions to enable this
functionality.
5-29
Convenient features
2. Operating HomeLink®
Information
1) Operating HomeLink®
If your garage door opener has Two-
Way Communication functionality,
it is possible for HomeLink to stop
functioning the garage door shortly
after initial programming, IF the Two-
Way Communication Programming
wasn’t properly completed. This
usually happens after the first 10 times
a programmed HomeLink button is
pressed. If you experience this, completing
the “Programming a New HomeLink
Button” and “Two-Way Communication
Programming” will restore door
OOS040095N
operation.
1. Press and release the desired
programmed HomeLink button (1, 2
4) Canadian Programming
or 3).
Canadian radio-frequency laws require
transmitter remote signals to “time-
Information
out” (or quit) after a couple seconds of
The HomeLink indicator (7) should
transmission, which may not be long
light green, solid or flashing, and your
enough for HomeLink to pick up the
programmed device should operate.
signal during programming.
If your device does not operate, the
If you live in Canada or you are having
HomeLink programming was not
difficulties programming a gate operator
successful, and you’ll need to reprogram
or garage door opener by using the
the button.
programming procedures, replace
“Programming a New HomeLink Button”
step 3 with the following:
2) Two-Way Communication Display
Behavior
While the HomeLink indicator light (7)
is flashing orange, press and release
(“cycle”) your device’s handheld remote
every two seconds until the HomeLink
indicator light (7) changes from orange
to green. You may now release the hand-
held remote button. Then proceed with
“Programming a New HomeLink Button”
step 4.
OOS047099N
1. Press and release one of the
programmed HomeLink buttons (1, 2
or 3).
5-30
05
3) Recalling Garage Door Status
HomeLink mirror with Two-Way
Communication provides a way to view
the last stored message from the garage
door opener. In order to recall the last
known status of the last activated device,
press the buttons “1 and 2” OR “2 and 3”
simultaneously.
• If the indicator (4) appears solid
Green, it indicates that the last
activated device was “closed”
OOS047411N
properly.
2.
The indicator (4) and (6) operates as
below, if your garage door opener
• If the indicator (6) appears solid
Green, it indicates that the last
has Two-Way Communication
functionality.
activated device was “open” properly.
• If the indicator (4) flashes in Orange,
3. Erasing HomeLink® Buttons
it indicates that the garage door is
“Closing”.
1) Erasing and Reprogramming a Single
HomeLink® Button:
• The indicator (4) turns solid green
once the garage door has closed.
1. Press and hold the desired HomeLink
button you want to re-program. DO
• If the indicator (6) flashes in Orange,
NOT release the button.
it indicates that the garage door is
“Opening”.
2. The HomeLink indicator light (7) will
illuminate solid green. Release the
• The indicator (6) turns solid green
button as soon as the HomeLink
once the garage door has fully
indicator light (7) begins to flash
opened.
orange, usually about 20 seconds.
• If the indicator (4) or (6) does not
3. Proceed with the steps in the
turn to green, it indicates that the
“Programming a New HomeLink
last status of garage door was not
Button” section.
received properly. The HomeLink
mirror tries to receive the last
known status of the garage door for
Information
a few seconds.
If you do not complete the re-
programming of a new device to the
button, it will revert to the previously
stored programming.
5-31
Convenient features
2) The following instructions will erase
FCC (USA) and ISED (Canada)
ALL HomeLink® programming from
This device complies with FCC rules
ALL buttons:
part 15 and Innovation, Science, and
Economic Development Canada RSS-
210. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) This
device must accept any interference that
may be received including interference
that may cause undesired operation.
WARNING: The transmitter has been
tested and complies with FCC and
ISED rules. Changes or modifications
not expressly approved by the party
OOS040098N
responsible for compliance could void
1. Press and hold the buttons (1) and (3)
the user’s authority to operate the
simultaneously.
device.
This equipment complies with FCC
2. The HomeLink indicator light (7) will
illuminate solid Orange for about 10
and ISED radiation exposure limits set
forth for an uncontrolled environment.
seconds.
End Users must follow the specific
3. Release the buttons once the
operating instructions for satisfying RF
HomeLink indicator light (7) changes
exposure compliance. This transmitter
to Green and flashes rapidly.
must be at least 20cm from the user and
4. Now all three HomeLink buttons
must not be co-located or operating in
(1), (2) and (3) are cleared of any
conjunction with any other antenna or
programming.
transmitter.
Information
HomeLink® and the HomeLink® House
logo are registered trademarks of Gentex
Corporation.
The myQ logo is a registered trademark of
The Chamberlain Group, Inc.
5-32
05
FCC (Htats-Unis) et ISED (Canada)
Méjico
Cet appareil est conforme aux
La operación de este equipo está sujeta
règlements de la FCC, section 15, et
a las siguientes dos condiciones: (1) es
au CNR-210 d’Innovation, Sciences et
posible que este equipo o dispositivo
Dhveloppement économique Canada. Le
pueda no causar interferencia dañina, y
fonctionnement est assujetti aux deux
(2) este dispositivo o dispositivos deben
conditions suivantes : (1) cet appareil ne
aceptar cualquier interferencia, que
doit pas causer d’interférences nuisibles
incluye la interferencia que puede causar
et (2) cet appareil doit accepter toute
su operación no deseada.
interférence reçue, y compris celle qui
pourrait entraîner un dysfonctionnement.
MISE EN GARDE : L’émetteur a subi des
tests et est conforme aux règlements
de la FCC et d’ISDE. Les changements
ou modifications non approuvés
explicitement par la partie responsable
de la conformité pourraient rendre
caduque l’autorisation de l’utilisateur de
se servir du dispositif.
Cet appareil est conforme aux limites
d’exposition aux radiations de la FCC et
d’ISDE établies pour un environnement
non contrôlé. Les utilisateurs finaux
doivent respecter les instructions
d’utilisation spécifiques pour satisfaire
aux exigences de conformité aux
expositions de RF.
L’émetteur doit se trouver à 20 cm au
minimum de l’utilisateur et ne doit pas
être situé au même endroit que tout
autre émetteur ou antenne ni fonctionner
avec un autre émetteur ou antenne.
5-33
Convenient features
HomeLink 5 Programing Flow Chart
OOS040475N
5-34
05
Side View mirrors
WARNING
Do not adjust or fold the side view
mirrors while driving. This may cause
loss of vehicle control resulting in an
accident.
NOTICE
•
Do not scrape ice off the mirror face;
this may damage the surface of the
glass.
•
If the mirror is jammed with ice, do
OOS047012
not adjust the mirror by force. Use an
Your vehicle is equipped with both left-
approved spray de-icer (not radiator
hand and right-hand side view mirrors.
antifreeze) spray, or a sponge or soft
The mirrors can be adjusted remotely
cloth with very warm water, or move
with the mirror adjustment control
the vehicle to a warm place and
switch. The side view mirrors can be
allow the ice to melt.
folded to help prevent damage when
•
Do not clean the mirror with harsh
going through an automatic car wash or
abrasives, fuel or other petroleum
when passing through a narrow street.
based cleaning products.
The right side view mirror is convex.
Objects seen in the mirror are closer than
they appear.
Use the inside rear view mirror or look
back directly to determine the actual
distance of other vehicles prior to
changing lanes.
Make sure to adjust the side view mirrors
to your desired position before you begin
driving.
5-35
Convenient features
Blind spot mirror (if equipped)
The blind spot mirror is equipped on the
driver’s left side view mirror.
WARNING
• Always check the road condition
while driving for unexpected
situations even though the vehicle is
equipped with a blind spot mirror.
• The blind spot mirror is intended as
a supplemental device to assist the
driver before changing lanes. Do not
OOS047413N
solely rely on the blind spot mirror as
a precaution. Always pay attention to
traffic conditions around you.
NOTICE
Do not clean the mirror with harsh
abrasives, fuel or other petroleum
based cleaning products.
OLF044478N
The Blind Spot Mirror (BSM) is a
supplemental mirror that minimizes the
driver’s blind spot zone by expanding
the field of view on the rear side of the
vehicle.
5-36
05
Adjusting the side view mirrors
Folding the side view mirror
OOS047013
OOS047014
1. Move the lever (1) either to the L (left
To fold the side view mirror, grasp the
side) or R (right side) to select the side
housing of the mirror and then fold it
view mirror you would like to adjust.
toward the rear of the vehicle.
2. Use the mirror adjustment control (2)
to position the selected mirror up,
down, left or right.
3. After adjustment, move the lever (1)
to the middle to prevent inadvertent
adjustment.
NOTICE
• The mirrors stop moving when
they reach the maximum adjusting
angles, but the motor continues to
operate while the switch is pressed.
Do not press the switch longer than
necessary, because this can damage
the motor.
• Do not attempt to adjust the side
view mirrors by hand, because this
can damage the motor.
5-37
Convenient features
winDows
OOS050134N
(1) Driver’s door power window switch
(5) Window opening and closing
(2) Front passenger’s door power
(6) Automatic power window
window switch
(7) Power window lock switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window
switch
5-38
05
Power Windows
Window opening and closing
The ignition switch must be in the
ON position to be able to raise or
lower the windows. Each door has a
Power Window switch to control that
door’s window. The driver has a Power
Window Lock switch which can block
the operation of passenger windows.
The power windows will operate for
approximately 30 seconds after the
ignition switch is placed in the ACC or
LOCK/OFF position. However, if the front
doors are opened, the Power Windows
OOS047018
will not operate even within the 30
To open:
second period.
Press the window switch down to the
first detent position (5). Release the
WARNING
switch when you want the window to
stop.
To avoid serious injury or death, do not
extend your head, arms or body outside
To close:
the windows while driving.
Pull the window switch up to the first
detent position (5). Release the window
Information
switch when you want the window to
• In cold and wet climates, power
stop.
windows may not work properly due to
freezing conditions.
Auto down window (if equipped)
• While driving with the rear windows
Pressing the power window switch
down or with the sunroof (if equipped)
down momentarily to the second
opened (or partially opened), your
detent position (6) completely lowers
vehicle may demonstrate a wind
the window even when the switch is
buffeting or pulsation noise. This
released. To stop the window at the
noise is normal and can be reduced
desired position while the window is in
or eliminated by taking the following
operation, pull up or press down and
actions. If the noise occurs with one
release the switch.
or both of the rear windows down,
partially lower both front windows
approximately one inch. If you
experience the noise with the sunroof
open, slightly close the sunroof.
5-39
Convenient features
Auto up/down window (if equipped)
Automatic reverse (if equipped)
Pressing or pulling up the power window
switch momentarily to the second
detent position (6) completely lowers or
lifts the window even when the switch
is released. To stop the window at the
desired position while the window is in
operation, pull up or press down and
release the switch.
Resetting the power windows
If the power windows do not operate
normally, the automatic power window
OLF044032
system must be reset as follows:
If a window senses any obstacle while it
1. Press the ignition switch to the ON
is closing automatically, it will stop and
position.
lower approximately 30 cm (12 in.) to
allow the object to be cleared.
2. Close the window and continue
pulling up on the power window
If the window detects the resistance
switch for at least one second.
while the power window switch is
pulled up continuously, the window
If the power windows do not operate
will stop upward movement then lower
properly after resetting, have the system
approximately 2.5 cm (1 in.).
checked by an authorized HYUNDAI
dealer.
If the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the
automatic window reverse feature,
the automatic window reverse will not
operate.
5-40
05
Power window lock button
Information
The automatic reverse feature is only
active when the “Auto Up” feature is used
by fully pulling up the switch to the second
detent.
NOTICE
Do not install any accessories on the
windows. The automatic reverse
feature may not operate.
OOS047019
WARNING
The driver can disable the power window
Make sure body parts or other objects
switches on the rear passenger doors by
are safely out of the way before closing
pressing the power window lock button.
the windows to avoid injuries or vehicle
When the power window lock button is
damage.
pressed:
Objects less than 4 mm (0.16 in.) in
• The driver’s master control can
diameter caught between the window
operate all the power windows.
glass and the upper window channel
• The front passenger’s control can
may not be detected by the automatic
operate the front passenger’s power
reverse window and the window will
window.
not stop and reverse direction.
• The rear passenger’s control cannot
operate the rear passengers’ power
window.
WARNING
Do not allow children to play with the
power windows. Keep the driver’s
door power window lock button in the
LOCK position. Serious injury or death
can result from unintentional window
operation by a child.
NOTICE
• To prevent possible damage to the
power window system, do not open
or close two windows or more at the
same time. This will also ensure the
longevity of the fuse.
• Never try to operate the main
switch on the driver’s door and the
individual door window switch in
opposite directions at the same time.
If this is done, the window will stop
and cannot be opened or closed.
5-41
Convenient features
sUNroof (if eqUipped)
If your vehicle is equipped with a
Sunshade
sunroof, you can slide or tilt your sunroof
with the sunroof switch located on the
overhead console.
OAD045037
Use the sunshade to block direct sunlight
coming through the sunroof glass.
OOS047021
Open or close the sunshade by hand.
The sunroof can only be operated when
the ignition switch or Engine Start/Stop
button is in the ON or START position.
Information
The sunroof can be operated for
The sunshade opens automatically when
approximately 30 seconds after the
the sunroof glass is opened, but the
ignition switch or Engine Start/Stop
sunshade does not close automatically
button is in the ACC or LOCK/OFF
when the sunroof glass is closed. Also, only
position.
the sunshade cannot be closed when the
However, if the front door is open, the
sunroof glass is opened.
sunroof cannot be operated even within
the 3 minutes period.
NOTICE
Do not pull the sunshade up or down,
WARNING
or apply excessive force as such action
• Never adjust the sunroof or sunshade
may damage the sunshade or cause it
while driving. This could result in loss
to malfunction.
of control and an accident that may
cause injury or property damage.
• Do not leave the engine running
and the key in your vehicle with
unsupervised children. Unattended
children could operate the sunroof,
which could result in serious injury.
• Do not sit on the top of the vehicle. It
may cause injury or vehicle damage.
NOTICE
Do not operate the sunroof when the
roof bars are installed on the vehicle or
when there is luggage on the roof.
5-42
05
Tilt open/close
Slide open/close
OOS047019
OOS047022
• Push the sunroof switch upward, the
• Push the sunroof switch rearward,
sunroof glass tilts open.
the sunshade and sunroof glass slide
open.
• Push the sunroof switch forward, the
sunroof glass automatically closes.
Push the sunroof switch forward, only
the sunroof glass closes.
To stop the sunroof movement at any
• Push the sunroof switch forward or
point, push the sunroof switch in any
rearward to the first detent position,
direction
the sunroof glass moves until the
switch is released.
• Push the sunroof switch forward
Information
or rearward to the second detent
The sunroof glass cannot slide open and
position, the sunroof glass operates
tilt open at the same time. You cannot tilt
automatically (auto slide feature).
the sunroof glass open while the sunroof
To stop the sunroof movement at any
glass is slide open. Also, you cannot slide
point, push the sunroof switch in any
the sunroof glass open while the sunroof
direction.
is tilt open. Slide open or tilt open the
sunroof glass when the sunroof glass is
completely closed.
Information
To reduce wind noise while driving,
we recommend that you drive at the
recommended position before the
maximum slide open position.
5-43
Convenient features
Automatic reverse
NOTICE
•
Do not continue to push the sunroof
switch after the sunroof is fully
opened, closed, or tilted. Damage to
the sunroof motor could occur.
•
Continuous operations such as slide
open/close, tilt open/close, etc. may
cause the motor or sunroof system to
malfunction.
•
Regularly remove any accumulated
dust on the sunroof rail.
OOS047023
•
Using the sunroof for a long time
can make noise caused by dust in
If the sunroof glass senses any obstacle
accumulated between the sunroof
while it is closing automatically, it will
and vehicle body. Open the sunroof
reverse direction then stop at a certain
and remove dust regularly using a
position.
clean cloth.
The auto reverse function may not
•
Do not try to open the sunroof when
work if an object thin or soft is caught
the temperature is below freezing
between the sliding sunroof glass and
or when the sunroof is covered with
sunroof sash.
snow or ice, otherwise the motor
could be damaged. In cold and wet
climates, the sunroof may not work
WARNING
properly.
• Make sure heads, hands, arms or
•
Do not open or drive with the sunroof
any other body parts or objects are
glass open immediately after rain or
out of the way before operating the
washing the vehicle. Water may wet
sunroof. Body parts or objects may
the interior of the vehicle.
get caught causing injuries or vehicle
damage.
•
Do not extend any luggage outside
the sunroof while driving. Vehicle
• Never deliberately use your body
damage may occur if the vehicle
parts to test the automatic reversal
suddenly stops.
function. The sunroof glass may
reverse direction, but there is a risk
of injury.
WARNING
Do not extend your head, arms, body
parts or objects outside the sunroof
while driving. Injuries may occur if the
vehicle suddenly stops.
5-44
05
Resetting the sunroof
Sunroof Open Warning (if
In some circumstances resetting the
equipped)
sunroof operation may need to be
If the driver turns off the engine when
performed. Some instances where
the sunroof is not fully closed, the
resetting the sunroof may be required
warning chime will sound for several
include:
seconds and the sunroof open warning
- When the 12-volt battery is either
will appear on the LCD display.
disconnected or discharged
Close the sunroof securely when leaving
- When the sunroof fuse is replaced
your vehicle.
- If the sunroof one-touch AUTO OPEN/
CLOSE operation is not functioning
CAUTION
properly
Make sure the sunroof is closed fully
when leaving your vehicle. If the
Sunroof resetting procedure:
sunroof is left open, rain or snow may
1. It is recommended to perform the
wet the interior of the vehicle. Also,
reset procedure with the vehicle
leaving the sunroof open when the
engine running. Start the vehicle in P
vehicle is unattended may invite theft.
(Park).
2. Make sure the sunroof glass is in the
fully closed position. If the sunroof
glass is open, push the switch forward
until the sunroof glass is fully closed.
3. Release the switch when the sunroof
glass is fully closed.
4. Push the switch forward until the
sunroof glass moves slightly. Then
release the switch.
5. Once again push and hold the sunroof
switch forward until the sunroof glass
slides open and close. Do not release
the switch until the operation is
completed.
If you release the switch during
operation, start the procedure again
from step 2.
Information
If the sunroof is not reset when the vehicle
battery is disconnected or discharged, or
the sunroof fuse is blown, the sunroof may
not operate normally.
5-45
Convenient features
exterior feAtures
Hood
Opening the hood
OOS047026
4. Pull out the support rod and hold the
hood open with the support rod (1).
OOS040024
1. Park the vehicle and set the parking
brake.
WARNING
2. Pull the release lever to unlatch the
•
When handling the support rod,
hood. The hood should pop open
grasp the rod in the area wrapped
slightly.
with rubber only. In some cases
where the engine has been running
the support rod may be hot. Caution
should be taken to avoid getting
burned by the support rod.
•
The support rod must be inserted
completely into the hole provided
whenever you inspect the engine
compartment. This will prevent the
hood from becoming dislodged and
falling and causing potential injury.
OOS050005N
3. Go to the front of the vehicle, raise the
hood slightly, push up the secondary
latch (1) inside of the hood center and
lift the hood (2).
5-46
05
Closing the hood
Liftgate
1.
Before closing the hood, check in and
Opening the liftgate
around the engine compartment to
ensure the following:
- Any tools or other loose objects
are removed from the engine room
area or hood opening area
- All glove, rags, or other
combustible material is removed
from the engine compartment
- All filler caps are tightly and
correctly installed
2.
Lower the hood halfway (lifted
OOS050006K
approximately 30 cm (12 in.) from the
Make sure the vehicle is in P (Park) and
closed position) and push down to
set the parking brake.
securely lock in place. Then double
check to be sure the hood is secure.
Then do one of the following:
If the hood can be raised slightly, it is
1. Unlock all doors with the Door Unlock
not securely locked. Open it again and
button on your remote key or smart
close it with more force.
key. Press the liftgate handle button
and open the liftgate.
WARNING
2. Press and hold the liftgate open
button on the remote key or smart
•
Before closing the hood, ensure
key. Press the liftgate handle button
all obstructions are removed from
and open the liftgate.
around the hood opening.
3. With the Smart Key in your
•
Always double check to be sure that
possession, press the liftgate handle
the hood is firmly latched before
button and open the liftgate.
driving away. Check there is no
hood open warning light or message
displayed on the instrument cluster.
Driving with the hood opened may
cause a total loss of visibility, which
might result in an accident.
•
Do not move the vehicle with the
hood in the raised position, as vision
is obstructed, which might result in
an accident, and the hood could fall
or be damaged.
5-47
Convenient features
Closing the liftgate
WARNING
OOS050007K
OOS047085
Lower the liftgate lid and press down
Do not hold the part (gas lifter) that
until it locks. To be sure the liftgate lid is
supports the liftgate. Be aware that
securely fastened, always check by trying
the deformation of the part may cause
to pull it up again without pressing the
vehicle damage and a risk of injury.
liftgate handle button.
WARNING
WARNING
•
NEVER allow anyone to occupy the
Always keep the liftgate lid completely
luggage compartment of the vehicle
closed while the vehicle is in motion. If
at any time. If the liftgate is partially
it is left open or ajar, poisonous exhaust
or totally latched and the person
gases containing carbon monoxide
is unable to get out, serious injury
(CO) may enter the vehicle and serious
or death could occur due to lack
illness or death may result.
of ventilation, exhaust fumes and
rapid heat build-up, or because of
NOTICE
exposure to cold weather conditions.
The luggage compartment is also
To prevent damage to the liftgate lift
a highly dangerous location in the
cylinders and the attached hardware,
event of a crash because it is not a
always close the liftgate before driving.
protected occupant space but is a
part of the vehicle’s crush zone.
Information
•
Your vehicle should be kept locked
In cold and wet climates, liftgate lock
and keys should be kept out of
and liftgate mechanisms may not work
the reach of children. Parents
properly due to freezing conditions.
should teach their children about
the dangers of playing in luggage
compartments.
5-48
05
Emergency liftgate safety release
Fuel filler door
Opening the fuel filler door
OOS050008K
Your vehicle is equipped with an
OOS047086
emergency liftgate safety release lever
The fuel filler door is opened from inside
located on the bottom of the liftgate
the vehicle using the fuel filler door
inside the vehicle.
release lever.
To unlock and open the liftgate manually
1. Turn the engine off. Locate the fuel
from inside the luggage compartment,
filler door release lever on the floor on
perform the following steps:
the left side of the driver seat.
1.
Insert the mechanical key from the
2. Pull up on the release lever.
key fob or a small screwdriver into the
slot at the bottom of the liftgate inside
the luggage compartment.
2.
Slide the key or screwdriver to the
right to engage the safety release
lever.
3.
Push the liftgate outward and upward.
WARNING
•
For emergencies, be fully aware
of the location of the emergency
tailgate safety release lever in the
vehicle and how to open the tailgate
if you are accidentally locked in the
luggage compartment.
•
No one should be allowed to occupy
the luggage compartment of the
vehicle at any time. The luggage
compartment is a very dangerous
location in the event of a crash.
•
Use the release lever for
emergencies only. Use with extreme
caution, especially while the vehicle
is in motion.
5-49
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст