Chrysler Sebring, Stratus sedan, Sebring Convertible. Manual — part 625
Adapter L-4559-2
Bearing Splitter P-334
Puller Set 5048
Remover/Installer 5049-A
Installer 5050A
Installer 5052
Compressor 5058A
Compressor 5059-A
JR
41TE AUTOMATIC TRANSAXLE
21 - 261
41TE AUTOMATIC TRANSAXLE (Continued)
Installer 5067
Pliers 6051
Installer 6052
Installer 6053
Button 6055
Plate 6056
Disk 6057
Installer 6061
21 - 262
41TE AUTOMATIC TRANSAXLE
JR
41TE AUTOMATIC TRANSAXLE (Continued)
Remover 6062-A
Holder 6259
Bolt 6260
Installer 6261
Tip 6268
Remover/Installer 6301
Remover/Installer 6302
Installer 6536-A
Puller 7794-A
JR
41TE AUTOMATIC TRANSAXLE
21 - 263
41TE AUTOMATIC TRANSAXLE (Continued)
ACCUMULATOR
DESCRIPTION
The 4XTE underdrive, overdrive, low/reverse, and
2/4 clutch hydraulic circuits each contain an accumu-
lator. An accumulator typically consists of a piston,
return spring(s), and a cover or plug. The overdrive
and underdrive accumulators are located within the
transaxle case, and are retained by the valve body
(Fig. 153).
The low reverse accumulator (Fig. 154) is also
located within the transaxle case, but the assembly is
retained by a cover and a snap-ring.
The 2/4 accumulator is located in the valve body. It
is retained by a cover and retaining screws (Fig.
155).
OPERATION
The function of an accumulator is to cushion the
application of a frictional clutch element. When pres-
surized fluid is applied to a clutch circuit, the appli-
cation force is dampened by fluid collecting in the
respective accumulator chamber against the piston
and spring(s). The intended result is a smooth, firm
clutch application.
End Play Socket Set 8266
Input Clutch Pressure Fixture 8391
Fig. 153 Underdrive and Overdrive Accumulators
1 - OVERDRIVE PISTON AND SPRING
2 - UNDERDRIVE PISTON AND SPRING
Fig. 154 Low/Reverse Accumulator
1 - PISTON
2 - RETURN SPRINGS
21 - 264
41TE AUTOMATIC TRANSAXLE
JR
41TE AUTOMATIC TRANSAXLE (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст