Chrysler 200 (2017 year). Manual — part 18

Settings

Translation

Message

Submenu

7

Rear

Parksense

Volume

Rear

Parksense Vol

Low, Med, High

8

Rear

Parksense

Braking

Parksense

Braking

On/Off

9

Blind Spot

Alert

Blind Spot

Alert

Off, Lights Only,

Lights & Chime

10

Lanesense

Warning

Lanesense

Alert

Early, Med, Late

11

Lanesense

Strength

Lanesense

Force

Low, Med, High

12

Hill Start

Assist

Hill Start Asst

On, Off

13

Auto Lock

Doors

Auto Lock

Doors

On, Off

14

Auto Unlock

Doors

Auto Unlock

Doors

On, Off

15

Passive

Entry

Passive Entry

On, Off

Settings

Translation

Message

Submenu

16

Remote

Unlock

Sequence

Remote

Unlock

Driver Door, All

Doors

17

Key Fob

Linked To

Memory

Key In

Memory

On, Off

18

Remote Start

Comfort

System

Rmt Start

Comfort

Off, Remote

Starts Only, All

Starts

19

Sound Horn

With

Remote Start

Horn W/Rmt

Start

On, Off

20

Sound Horn

With

Remote

Lock

Horn W/Rmt

Lock

Off, 1st Press,

2nd Press

21

Flash Lights

With Lock

Lights

W/Lock

On, Off

22

Daytime
Running

Lights

Daytime

Lights

On, Off

4

UNDERSTANDING YOUR INSTRUMENT PANEL

281

Settings

Translation

Message

Submenu

23

Automatic

Highbeams

Auto

Highbeams

On, Off

24

Headlights

On With

Wipers

Lights

W/Wipers

On, Off

25

Rain Sensing

Wipers

Auto Wipers

On, Off

26

Headlights

Off Delay

Lights Off

Delay

0 Seconds,

30 Seconds,
60 Seconds,

90 Seconds

27

Key-Off

Power Delay

Power Off

Delay

Off, 45 Seconds,

5 Minutes,

10 Minutes

28

Illuminated

Approach

Lights

W/Unlock

0 Seconds,

30 Seconds,
60 Seconds,

90 Seconds

29

Easy Exit

Seat

Easy Exit Seat

On, Off

Settings

Translation

Message

Submenu

30

Tilt Mirror
In Reverse

Tilt Mirror

In R

On, Off

31

Compass

Variance

Compass Var

See Owner’S

Manual, X

Increment

32

Calibrate
Compass

Compass Cal

Push > To

Calibrate The

Compass

33

Brake

Service

Brake Service

Brake Service

Unavailable

Accelerator Pedal

Pressed

34

Auto Park

Brake

Auto Park

Brake

On, Off

CYBERSECURITY

Your vehicle may be a connected vehicle and may be
equipped with both wired and wireless networks. These
networks allow your vehicle to send and receive informa-
tion. This information allows systems and features in your
vehicle to function properly.

282

UNDERSTANDING YOUR INSTRUMENT PANEL

Your vehicle may be equipped with certain security fea-
tures to reduce the risk of unauthorized and unlawful
access to vehicle systems and wireless communications.
Vehicle software technology continues to evolve over time
and FCA US LLC, working with its suppliers, evaluates
and takes appropriate steps as needed. Similar to a com-
puter or other devices, your vehicle may require software
updates to improve the usability and performance of your
systems or to reduce the potential risk of unauthorized and
unlawful access to your vehicle systems.

The risk of unauthorized and unlawful access to your
vehicle systems may still exist, even if the most recent
version of vehicle software (such as Uconnect software) is
installed.

WARNING!

• It is not possible to know or to predict all of the

possible outcomes if your vehicle’s systems are
breached. It may be possible that vehicle systems,
including safety related systems, could be impaired or
a loss of vehicle control could occur that may result in
an accident involving serious injury or death.

(Continued)

WARNING! (Continued)

• ONLY insert media (e.g., USB, SD card, or CD) into

your vehicle if it came from a trusted source. Media
of unknown origin could possibly contain malicious
software, and if installed in your vehicle, it may
increase the possibility for vehicle systems to be
breached.

• As always, if you experience unusual vehicle behav-

ior, take your vehicle to your nearest Authorized
Dealer immediately.

NOTE:

• FCA or your dealer may contact you directly regarding

software updates.

• To help further improve vehicle security and minimize

the potential risk of a security breach, vehicle owners
should:

• Routinely check www.driveuconnect.com/software-

update to learn about available Uconnect software
updates.

• Only connect and use trusted media devices (e.g.

personal mobile phones, USBs, CDs).

4

UNDERSTANDING YOUR INSTRUMENT PANEL

283

Privacy of any wireless and wired communications cannot
be assured. Third parties may unlawfully intercept infor-
mation and private communications without your consent.
For further information, refer to “Privacy Practices – If
Equipped with Uconnect 8.4 radio” in “All About
Uconnect Access” in your Uconnect Owner’s Manual
Supplement and “Onboard Diagnostic System (OBD II)
Cybersecurity”.

UCONNECT SETTINGS

The Uconnect system uses a combination of buttons on the
touchscreen and buttons on the faceplate located on the
center of the instrument panel that allows you to access
and change the customer programmable features.

Uconnect 5.0 Buttons On Touchscreen And Buttons On

Faceplate

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

284

UNDERSTANDING YOUR INSTRUMENT PANEL

Buttons On The Faceplate

Buttons are located below the Uconnect system in the
center of the instrument panel. In addition, there is a
Scroll/Enter control knob located on the right side of the
Climate Controls in the center of the instrument panel.
Turn the control knob to scroll through menus and change

settings (i.e. 30, 60, 90) push the center of the control knob
one or more times to select or change a setting (i.e. ON,
OFF).

Your Uconnect system may also have a Screen Off and Back
buttons located below the system.

Push the Screen Off button to turn off the Uconnect screen.
Push the Screen Off button a second time to turn the screen
on.

Push the Back button to exit out of a Menu or certain
option on the Uconnect system.

Buttons On The Touchscreen

Buttons on the touchscreen are accessible on the Uconnect
display.

Customer Programmable Features/Personal
Settings — Uconnect 5.0/8.4/8.4 NAV Settings

Uconnect 5.0 — If a SETTINGS button on the faceplate
exists, push this button. If not, push the MORE button on
the faceplate and press the

⬙Settings⬙ button on the touch-

screen. The remaining settings are defined for the Uconnect
8.4/8.4 NAV — Press the “Apps” button on the touch-
screen, then press the “Settings” button on the touchscreen
to display the menu setting screen. In this mode the

Uconnect 8.4 Buttons On Touchscreen And Buttons On

Faceplate

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

4

UNDERSTANDING YOUR INSTRUMENT PANEL

285

Uconnect system allows you to access programmable fea-
tures that may be equipped such as Display, Voice, Clock,
Safety & Driving Assistance (if equipped), Lights, Doors &
Locks, Auto-On Comfort (if equipped), Engine Off Op-
tions, Audio, Phone/Bluetooth, SiriusXM Setup, Restore
Settings, Clear Personal Data (if equipped).

NOTE:

Only one category may be selected at a time.

To adjust the setting of a programmable feature, press the
desired setting option. Once in the desired setting option,
press and release the preferred setting until a check-mark
appears next to the setting, showing that the setting has

been selected. Once the setting is complete, either press the
back arrow button on the touchscreen or the Back button
on the faceplate to return to the previous menu or press the
“X” button on the touchscreen to close out of the settings
screen. Pressing the Up or Down Arrow buttons on the
right side of the screen will allow you to toggle up or down
through the list of available settings.

Display

After pressing the “Display” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Display Mode

Manual

Auto

Display Brightness With

Headlights ON

+

-

NOTE:
To make changes to the

⬙Display Brightness with Headlights ON⬙ setting, the headlights must be on and the interior

dimmer switch must not be in the

⬙party⬙ or ⬙parade⬙ positions.

286

UNDERSTANDING YOUR INSTRUMENT PANEL

Setting Name

Selectable Options

Display Brightness With

Headlights OFF

+

-

NOTE:
To make changes to the

⬙Display Brightness with Headlights OFF⬙ setting, the headlights must be off and the interior

dimmer switch must not be in the

⬙party⬙ or ⬙parade⬙ positions.

Set Language

NOTE:
When the “Set Language” feature is selected, you may select one of multiple languages (English/Français/Español)
for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set Lan-
guage” button on the touchscreen, then press the desired language button on the touchscreen until a check-mark ap-
pears next to the language, showing that setting has been selected.

Units

US

Metric

Touchscreen Beep

Navigation Turn-By-Turn In

Cluster — If Equipped

NOTE:

When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in

the Instrument Cluster Display as the vehicle approaches a designated turn within a programmed route.

Voice

Brief

Detailed

4

UNDERSTANDING YOUR INSTRUMENT PANEL

287

Clock

After pressing the “Clock” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Sync Time With GPS

Set Time Hours

+

-

NOTE:
The “Set Time Hours” feature will allow you to adjust the hours. The “Sync time with GPS” button on the touch-
screen must be unchecked.

Set Time Minutes

+

-

NOTE:
The “Set Time Minutes” feature will allow you to adjust the minutes. The “Sync time with GPS” button on the touch-
screen must be unchecked.

Time Format

12hrs

24hrs

Show Time in Status Bar — If Equipped

288

UNDERSTANDING YOUR INSTRUMENT PANEL

Safety & Driving Assistance

After pressing the “Safety/Assistance” button on the
touchscreen the following settings will be available:

Setting Name

Selectable Options

ParkView Backup Camera

Delay — If Equipped

On

Off

NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to 10 seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.

ParkView Backup Camera

Active Guidelines — If

Equipped

NOTE:
The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

289

Setting Name

Selectable Options

ParkView Backup Camera

Fixed Guidelines — If

Equipped

NOTE:

When the “ParkView Backup Camera Fixed Guidelines” feature is enabled, fixed (static) grid lines are over-

laid on the Rear Backup Camera image to illustrate the width of the vehicle.

Forward Collision Warn-

ing On/Off — If

Equipped

On

Off

NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will re-
main off when the vehicle is restarted.

Forward Collision Warn-

ing Sensitivity — If

Equipped

Far

Med

Near

NOTE:
The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle
directly in front of you needs to be at, before the system will warn you of a possible collision with the vehicle directly
in front of you, based on the option selected. “Far” will give you the most amount of reaction time, whereas “Near”
will give you the least amount of reaction time, based on the distance between the two vehicles.

290

UNDERSTANDING YOUR INSTRUMENT PANEL

Setting Name

Selectable Options

ParkSense — If Equipped

Off

Sound Only

Sound and Display

NOTE:
The “ParkSense” system setting will scan for objects behind the vehicle when the transmission gear selector is in RE-
VERSE and the vehicle speed is less than 7 mph (11 km/h), when enabled. It will provide an alert (audible and/or
visual) to indicate the proximity to other objects. The system can be enabled with “Sound Only,” or “Sound and Dis-
play.”

Rear ParkSense Chime

Volume

Low

Medium

High

Front ParkSense Chime

Volume

Low

Medium

High

Rear ParkSense Braking

Assist — If Equipped

NOTE:
When the “Rear ParkSense Braking Assist” feature is selected, the park assist system will detect objects located be-
hind the vehicle and utilize autonomous braking to stop the vehicle.

Blind Spot Alert — If

Equipped

Off

Lights

Lights and Chime

NOTE:
When the “Blind Spot Alert” feature is selected, the Blind Spot Monitor (BSM) system is activated and will show a
visual alert in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert
when the turn signal is on. When “Off” is selected, the Blind Spot Monitor (BSM) system is deactivated.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

291

Setting Name

Selectable Options

If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged,
the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sen-
sor that is misaligned will result in the BSM not operating to specification.

Rain Sensing Auto Wip-

ers

Hill Start Assist — If

Equipped

Tilt Mirrors in Reverse

LaneSense Warning — If

Equipped

Early

Medium

Late

NOTE:

The “LaneSense Warning” setting determines at what distance the LaneSense system will warn you, through

steering wheel feedback, of a possible lane departure.

LaneSense Strength — If

Equipped

Low

Medium

High

Electric Park Brake Ser-

vice Mode — If Equipped

NOTE:

The “Electric Park Brake Service Mode” feature provides a means for a technician or vehicle owner to utilize

a vehicle integrated, menu driven system, to command the electric park brake retraction, to service the rear founda-
tion brakes (brake pads, calipers, rotors, etc.).

292

UNDERSTANDING YOUR INSTRUMENT PANEL

Setting Name

Selectable Options

Auto Park Brake

NOTE:

Auto Park Brake will set the park brake once the vehicle is set in park (or at key off for a manual transmission).

Lights

After pressing the “Lights” button on the touchscreen the
following settings will be available.

Setting Name

Selectable Options

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.

Headlights With

Wipers — If

Equipped

Headlight Illumi-

nated On Approach

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Illumination On Approach” feature is selected, it allows the adjustment of the amount of time
the headlights remain on after the doors are unlocked with the key fob.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

293

Setting Name

Selectable Options

Auto Dim High

Beams— If

Equipped

On

Off

NOTE:
When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati-
cally under certain conditions.

Daytime Running

Lights — If

Equipped

Yes

No

Flash Lights With

Lock

On

Off

Doors & Locks

After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Auto Door Locks

On

Off

NOTE:
When the “Auto Door Locks” feature is selected, all doors will lock automatically when the vehicle reaches a speed of
12 mph (20 km/h).

294

UNDERSTANDING YOUR INSTRUMENT PANEL

Setting Name

Selectable Options

Auto Unlock On Exit

NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped, the transmis-
sion is in the PARK or NEUTRAL position and the driver’s door is opened.

Flash Lights With Lock
Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote Start

1st Press Of Key Fob Unlocks

Driver Door

All Doors

NOTE:
When

⬙Driver Door⬙ is selected with 1st Press Of Key Fob Unlocks, only the driver’s door will unlock with the first press of

the key fob UNLOCK button. You must press the key fob UNLOCK button twice to unlock the passenger’s doors. When

⬙All Doors⬙ is selected for 1st Press Of Key Fob Unlocks, all doors will unlock on the first press of the key fob UNLOCK
button. If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors will unlock no matter which Pas-
sive Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is programmed, only the driv-
er’s door will unlock when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob Unlocks “Driver Door”
is programmed, touching the handle more than once will result in only the driver’s door opening. If “Driver Door” is se-
lected, once the driver door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use key fob).

Passive Entry — If Equipped

NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob
LOCK or UNLOCK buttons.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

295

Setting Name

Selectable Options

Personal Settings Linked To Key Fob — If

Equipped

NOTE:
The “Settings Linked To Key Fob” feature provides automatic recall of all settings stored to a memory location (driv-
er’s seat, exterior mirrors, steering column position and radio station pre-sets) to enhance driver mobility when enter-
ing and exiting the vehicle.

Auto-On Comfort — If Equipped

After pressing the “Auto-On Comfort & Remote Start”
button on the touchscreen the following settings will be
available:

Setting Name

Selectable Options

Auto-On Driver Heated/

Ventilated Seat & Steering

Wheel With Vehicle Start

— If Equipped

Off

Remote Start

All Starts

NOTE:
When this feature is selected the driver’s heated seat and heated steering wheel will automatically turn ON when
temperatures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C), the driver vented seat will turn
ON.

296

UNDERSTANDING YOUR INSTRUMENT PANEL