Chrysler RG Voyager. Manual — part 1016
(9) Remove selector cable from gearshift mecha-
nism (Fig. 176).
(10) 2.4L Gas models goto Step 15. 2.5L TD
Models: Remove battery thermal shield (Fig. 177).
(11) Remove battery hold down nut, clamp, and
battery (Fig. 178).
(12) Remove battery tray (Fig. 179). Disconnect
battery temperature sensor.
Fig. 175 Selector Cable Retainer Clip
1 - RETAINER CLIP
Fig. 176 Selector Cable at Gearshift Mechanism
1 - GEARSHIFT MECHANISM
2 - SELECTOR CABLE
Fig. 177 Battery Thermal Shield
1 - BATTERY THERMAL SHIELD
Fig. 178 Battery and Hold-Down Clamp
1 - BATTERY
2 - HOLD-DOWN CLAMP
RS
T850 MANUAL TRANSAXLE
21 - 85
GEARSHIFT CABLE - SELECTOR (Continued)
(13) Remove coolant recovery bottle from bracket.
(14) Remove
coolant
recovery
bottle
mounting
bracket (Fig. 180).
(15) Disconnect crossover cable from transaxle
crossover lever (Fig. 181).
(16) Remove crossover cable retainer clip and dis-
engage cable from mount bracket (Fig. 181).
(17) Raise vehicle on hoist.
(18) Remove selector cable from engine compart-
ment, then remove cable from passenger compart-
ment through opening in floor pan.
INSTALLATION
(1) From
underneath
vehicle,
install
gearshift
selector cable into passenger compartment through
floor pan hole. Install remainder of cable into posi-
tion in engine compartment.
(2) Lower vehicle.
(3) Install selector cable to mount bracket and
secure with retainer clip (Fig. 182).
Fig. 179 Battery Tray
1 - BATTERY TRAY
Fig. 180 Coolant Recovery Bottle Bracket
1 - COOLANT RECOVERY BOTTLE BRACKET
2 - NUT
3 - MOUNT BRACKET
Fig. 181 Gearshift Cables at Transaxle
1 - SELECTOR CABLE
2 - CABLE RETAINER
3 - CABLE RETAINER
4 - CROSSOVER CABLE
5 - MOUNT BRACKET
21 - 86
T850 MANUAL TRANSAXLE
RS
GEARSHIFT CABLE - SELECTOR (Continued)
(4) Install cable to transaxle selector lever (Fig.
182).
(5) 2.4L Gas models goto Step 10. 2.5L TD
models: Install coolant recovery bottle bracket (Fig.
183).
(6) Install coolant recovery bottle to bracket.
(7) Connect battery temperature sensor to battery
tray. Install battery tray into position (Fig. 184).
(8) Install battery, hold-down clamp, and nut (Fig.
185).
(9) Install battery thermal shield (Fig. 186).
Fig. 182 Gearshift Cables at Transaxle
1 - SELECTOR CABLE
2 - CABLE RETAINER
3 - CABLE RETAINER
4 - CROSSOVER CABLE
5 - MOUNT BRACKET
Fig. 183 Coolant Recovery Bottle Bracket
1 - COOLANT RECOVERY BOTTLE BRACKET
2 - NUT
3 - MOUNT BRACKET
Fig. 184 Battery Tray
1 - BATTERY TRAY
Fig. 185 Battery and Hold-Down Clamp
1 - BATTERY
2 - HOLD-DOWN CLAMP
RS
T850 MANUAL TRANSAXLE
21 - 87
GEARSHIFT CABLE - SELECTOR (Continued)
(10) Install selector cable to gearshift mechanism
(Fig. 187). Install retainer clip (Fig. 188).
(11) Install center console support bracket (Fig.
189). Torque support bracket-to-gearshift mechanism
screws to 12 N·m (108 in. lbs.).
(12) Install center console assembly (Fig. 190).
Install and torque center console-to-gearshift mecha-
nism screws to 5 N·m (45 in. lbs.).
Fig. 186 Battery Thermal Shield
1 - BATTERY THERMAL SHIELD
Fig. 187 Selector Cable at Gearshift Mechanism
1 - GEARSHIFT MECHANISM
2 - SELECTOR CABLE
Fig. 188 Selector Cable Retainer Clip
1 - RETAINER CLIP
Fig. 189 Center Console Support Bracket
1 - BRACKET
2 - SCREW
3 - GEARSHIFT MECHANISM
21 - 88
T850 MANUAL TRANSAXLE
RS
GEARSHIFT CABLE - SELECTOR (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст